化工新型材料

化工新型材料 ›› 2019, Vol. 47 ›› Issue (11) : 29-32.

综述与专论

聚酰胺改性研究进展

作者信息 +

Research progress on the modification of polyamide

Li Jun, Zhang Hong, Zhang Jiahui, Tang Qiang, Zhou Baohan, Xu Baoming, Chen Kun

Author information +

文章历史 +

Received		Published
2018-06-08		2019-11-20
Issue Date	Revised Date
2019-12-04	2018-06-08

PDF (1180K)

摘要

作为开发最早的一种工程材料,聚酰胺具有强度大、韧性高、耐热性好等优势而广泛应用于航空、电子、器械等领域。综述了近年来聚酰胺的共聚改性、共混改性、纤维增强、无机纳米粒子填充等改性方法,指出共混改性是聚酰胺改性的研究重点,并对未来聚酰胺的研究方向进行了展望。

Abstract

As one of the earliest developed engineering materials,polyamides are widely used in aeronautics,electronics,equipment and other fields due to their advantages such as high strength,high toughness,and good heat resistance.The modification methods of polyamide such as copolymerization modification,blending modification,fiber reinforcement and inorganic nanoparticle filling developed in recent years were reviewed.It was pointed out that the way of blending modification became the focus of research.In the future,the research of polyamides will develop in the direction of high strength,high performance,and functionalization.

关键词

聚酰胺 / 尼龙 / 改性 / 进展

Key words

polyamide / nylon / modification / progress

引用本文

引用格式 ▾

聚酰胺改性研究进展[J]. 化工新型材料, 2019, 47(11): 29-32 DOI:

登录浏览全文

4963

注册一个新账户忘记密码

参考文献

原文顺序 | 出版日期 | 本文引用

[1] 刘正英,杨鸣波.工程塑料改性技术[M].北京:化学工业出版社,2007:2-84.
[2] 王萍丽,任中来,邹光继,等.半芳香族聚酰胺的发展与应用研究[J].化工新型材料,2016,44(6):233-235.
[3] Alvi M U,Zulfiqar S,Yavuz C T,et al.Influence of aminosilane coupling agent on aromatic polyamide/intercalated clay nanocomposites[J].Industrial & Engineering Chemistry Research,2013,52(21):6908-6915.
[4] Alaghemandi M,Gharibzahedi M R,Spohr E,et al.Thermal conductivity of polyamide-6,6 in the vicinity of charged and uncharged graphene layers:a molecular dynamics analysis[J].The Journal of Physical Chemistry C,2012,116(26):14115-14122.
[5] Hu Juan,Zhang Haobin,Hong Song,et al.Simultaneous improvement in both electrical conductivity and toughness of polyamide 6 nanocomposites filled with elastomer and carbon black particles[J].Industrial & Engineering Chemistry Research,2014,53(6):2270-2276.
[6] 江建第,张昆,刘重阳,等.脂肪族聚酰胺热膨胀行为的研究[J].高分子学报,2013(2):255-262.
[7] 何建良,沈恒根,邓召良,等.间位芳香族聚酰胺三元共聚纤维的制备与性能[J].纺织学报,2015,36(12):11-15.
[8] Xu Lu,Li Junjun,Wang Daoliang,et al.Structure of polyamide 6 and poly (p-benzamide) in their rod-coil-rod triblock copolymers investigated with in situ wide angle X-ray diffraction[J].Polymer,2011,52(4):1197-1205.
[9] Li Junjun,Hang Youju,Cong Yuanhua,et al.Frustrated structures of polycaprolactam and poly(p-benzamide) in their rod-coil-rod triblock copolymers[J].Polymer,2010,51(1):232-239.
[10] 万丽华,翁志学,黄志明,等.尼龙-1010前期缩聚动力学[J].化工学报,2004,55(1):106-109.
[11] 程晓敏,汪乐春,吴珊珊.半芳香共聚酰胺的合成及热稳定性的研究[J].化学学报,2009,67(9):983-988.
[12] Du Libo,Yang Guisheng.Synthesis and properties of SMA-g-PA6 and PPO blends via in situ active anionic polymerization of ε-caprolactam,comparing with MCPA6/PPO blends[J].Journal of Applied Polymer Science,2008,108(5):3419-3429.
[13] 刘宇辰,李迎春,曲振,等.耐高温PA10T/11共聚尼龙的合成与表征[J].塑料工业,2012,40(10):20-23.
[14] 胡国胜,杜拴丽,孙并臻.透明聚酰胺PA10I/11的合成工艺参数探讨[J].塑料工业,2016,44(6):17-20.
[15] 胡国胜,杜拴丽,孙并臻.11-氨基十一酸对透明共聚酰胺PA10I/11力学性能的影响[J].塑料科技,2016,44(7):47-50.
[16] 张洁,田攀攀,李新法,等.PA6T/1010共聚物热性能研究[J].塑料科技,2013,41(2):63-66.
[17] 周磊,孙莉,薛为岚,等.尼龙6/66/510热熔胶合成与性能的研究[J].高校化学工程学报,2016,30(6):1348-1352.
[18] 敖玉辉,陈刚,陈丽岩,等.聚对苯二甲酰对苯二胺-芳醚共聚物的合成与成纤性能[J].高分子材料科学与工程,2012,28(1):26-29.
[19] 何建良,沈恒根,邓召良,等.间位芳香族聚酰胺三元共聚纤维的制备与性能[J].纺织学报,2015,36(12):11-15.
[20] 方春晖,胡国胜,张静静,等.熔融缩聚透明共聚酰胺的制备及表征[J].工程塑料应用,2016,44(2):111-115.
[21] 焦贵宁,胡国胜,方春晖,等.透明PADMDC10/11的制备及表征[J].工程塑料应用,2014,42(11):89-92.
[22] Silva J,Machado A V,Maia J.Rheological behavior of compatibilized and non-compatibilized PA6/EPM blends[J].Rheologica Acta,2007,46(8):1091-1097.
[23] 张景中,何敏,鲁圣军,等.PA6/SMA/N-PMI复合材料的热性能和力学性能研究[J].塑料科技,2014,42(4):48-51.
[24] 何敏,张景中,鲁圣军,等.PA6/SMA/N-PMI共混物的制备及其性能研究[J].塑料工业,2014,42(7):86-89.
[25] 张景中,刘典新,刘一春,等.PA6/NMA共混物的制备及其性能研究[J].塑料科技,2014,42(10):41-45.
[26] Gallego R,García-López D,López-Quintana S,et al.Toughening of PA6/mEPDM blends by two methods of compounding,extruder and internal mixer:rheological,morphological and mechanical characterization[J].Polymer Bulletin,2008,60(5):665-675.
[27] 田际波,戴文利,邹晓轩,等.PA6/K-MAH共混物的制备与性能[J].高分子材料科学与工程,2006,22(1):226-229.
[28] 陈学进,吕广超,许彦冰,等.PA1012/SMA共混物的制备及性能研究[J].塑料工业,2016,44(10):26-29.
[29] Thomason J L.Structure-property relationships in glass reinforced polyamide,part 2:the effects of average fiber diameter and diameter distribution[J].Polymer Composites,2007,28(3):331-343.
[30] Thomason J L.Structure-property relationships in glass-reinforced polyamide,part 3:effects of hydrolysis ageing on the dimensional stability and performance of short glass-fiber-reinforced polyamide 66[J].Polymer Composites,2010,28(3):344-354.
[31] 王军祥,李凌,葛世荣,等.表面处理碳纤维对增强尼龙复合材料性能影响[J].中国矿业大学学报,2002,31(2):158-161.
[32] Chá vez-Medellin R,Prado L A S D A,Schulte K.Polyamide-12/functionalized carbon nanofiber composites:evaluation of thermal and mechanical properties[J].Macromolecular Materials & Engineering,2010,295(4):397-405.
[33] 郑雪琴,刘方,于利华.碳纤维增强PPO/PA6共混物的研究[J].中国塑料,2013,27(7):43-47.
[34] Mohsen R S,Saied N K,Ali Z,et al.Theoretical and experimental determination of tensile properties of nanosized and micron-sized CaCO₃/PA66 composites[J].Polymer Composites,2009,30(3):274-280.
[35] Yoo Y,Cui L,Yoon P J,et al.Morphology and mechanical properties of rubber toughened amorphous polyamide/MMT nanocomposites[J].Macromolecules,2010,43(2):615-624.
[36] 张凯,李迎春,胡国胜.原位聚合制备尼龙610/改性蒙脱土纳米复合材料的研究[J].工程塑料应用,2013,41(2):30-32.
[37] 方秀苇,李小红,余来贵,等.可反应性纳米SiO₂/尼龙1010复合材料的制备和力学性能[J].材料研究学报,2008,22(5):521-525.
[38] 方秀苇,张晓丽,李小红,等.可反应性纳米SiO₂/尼龙1010复合材料的热性能和结晶行为[J].塑料,2009,38(5):95-97.
[39] 徐翔民,胡修池,张予东,等.不同表面修饰纳米SiO₂/尼龙1010复合材料的热性能[J].复合材料学报,2011,28(6):71-79.
[40] Zhang Y H,Huang Y D,Liu L,et al.Effects of γ-ray radiation grafting on aramid fibers and its composites[J].Applied Surface Science,2008,254(10):3153-3161.
[41] 龙军,张志谦,魏月贞,等.接枝偶联剂对F-12纤维/环氧复合材料界面改性的研究[J].复合材料学报,2000,17(3):15-19.