以甲基丙烯酸(MAA)、甲基丙烯酸甲酯(MMA)以及丙烯酸丁酯(BA)为原料,通过溶液聚合法制备羧基丙烯酸树脂,再以其作为3D打印粉末材料,并以稀碱溶液作为粘接溶液,经3D打印制备实体成品。分别考察了MAA用量、树脂相对分子质量以及粉末材料配方对3D打印成品性能的影响规律,确定了树脂最优合成工艺与粉末材最优配比。最优条件下,3D打印成品的弯曲强度为9.4MPa、抗压强度为26.7MPa,满足不同的应用需求。
The carboxyl acrylic resin used as prototyping powder for three dimensional printing (3DP) was copolymerized by solution polymerization from MAA,MMA and BA.Afterwards 3DP production was prepared from prototyping powder and dilute alkali used as adhesive solution.The effects of MAA dosage,the molecular weight of resultant resin and formula of prototyping powder on the properties of 3DP production were investigated separately,and the optimum synthetic conditions and the optimum ratio of prototyping powder were determined.The flexural strength and compressive strength of optimum 3DP production were 10.2MPa and 27.7MPa respectively,which met application requirement under some different occasions.
[1] Dimitrov D,Schreve K,Beer N de.Advances in three dimensional printing-state of the art and future perspectives[J].Rapid Prototyping Journal,2006,12(3):136-147.
[2] 聂建华,李洲祥,林跃华.SLS工艺三维打印用高性能快速成型粉末材料和粘接溶液的研制[J].塑料工业,2014,42(2):60-63.
[3] Ben U,Duane S,Rhonda A,et al.A review of process development steps for new material systems in three dimensional printing (3DP)[J].Journal of Manufacturing Processes,2008,10(2):96-104.
[4] Hashmi M S J,Yilbas B S,Naher S.Three dimensional printing for casting applications:a state of art review and future perspectives[J].Advanced Materials Research,2010,83-86:342-349.
[5] B-J de Gans,Duineveld P C,Schubert U S.Inkjet printing of polymers:state of the art and future developments[J].Advanced Materials,2004,16(3):203-213.
[6] 聂建华,陈志国,郑大锋,等.3D打印用羟基丙烯酸共聚树脂柔韧性粉末材料的制备[J].合成树脂及塑料,2014,31(4):21-24.
[7] Benjamin M Wu,Qrcl Michael J Cima.Effects of solvent-particle interaction kinetics on microstructure formation during three-dimensional printing[J].Polymer Engineering and Science,1999,39(2):249-260.
[8] 聂建华,陈泽成,林跃华.真空镀铝薄膜清漆用水溶性丙烯酸树脂的研制[J].电镀与涂饰,2012,31(11):58-61.
[9] 聂建华,林跃华,陈泽成.真空镀铝薄膜防护用聚丙烯酸酯树脂微乳液的研制[J].电镀与涂饰,2013,32(4):64-68.
[10] 刘继涛,皮丕辉,文秀芳,等.水性发用聚丙烯酸定型树脂的合成及性能[J].日用化学工业,2009,39(5):328-331.
[11] 聂建华,周志盛,霍泽荣,等.弹性产品用聚酰胺树脂打印通用型粉末材料及黏结溶液的研究[J].塑料工业,2014,42(1):122-125.
[12] Jintamai Suwanprateeb.Improvement in mechanical properties of three-dimensional printing parts made from natural polymers reinforced by acrylate resin f or biomedical applications:a double infiltration approach[J].Polymer International,2006,55(1):57-62.
[13] Patirupanusara P,Suwanpreuk W,Rubkumintara T,et al.Effect of binder content on the material properties of polymethyl methacrylate fabricated by three dimensional printing technique[J].Journal of Materials Processing Technology,2008,207(1/2/3):40-45.
基金资助
广东省公益研究与能力建设科技项目(2015A010104003);中山市社会公益科技研究项目(2017B1118)
PDF
(1256KB)
