两亲性Janus填料改性水性环氧树脂涂层的制备及性能研究

张馨予1, 张琳林1,2*, 王杨松3, 张静1, 王俊博1, 陈思晗1, 王娜1,2

化工新型材料 ›› 2026, Vol. 54 ›› Issue (1) : 145 -150.

PDF
化工新型材料 ›› 2026, Vol. 54 ›› Issue (1) : 145-150. DOI: 10.19817/j.cnki.issn1006-3536.2026.01.031
科学研究

两亲性Janus填料改性水性环氧树脂涂层的制备及性能研究

    张馨予1, 张琳林1,2*, 王杨松3, 张静1, 王俊博1, 陈思晗1, 王娜1,2
作者信息 +

Preparation and performance research of waterborne epoxy resin coating modified by amphiphilic Janus filler

  • Zhang Xinyu1, Zhang Linlin1,2, Wang Yangsong3, Zhang Jing1, Wang Junbo1, Chen Sihan1, Wang Na1,2
Author information +
文章历史 +
PDF

摘要

采用乳液界面聚合诱导相分离一步法制备两亲性Janus纳米颗粒聚丙烯酰胺-交联聚苯乙烯(PAM-cPS),将其作为填料用于改善水性环氧树脂(WEP)涂层的耐腐蚀性、疏水性和耐磨性能。研究了PAM-cPS填料含量对WEP涂层耐腐蚀性、疏水性以及机械性能的影响。结果表明:添加PAM-cPS填料可以有效提高WEP涂层的综合性能,当填料含量为WEP涂料3%时,涂层在中性盐雾环境下测试75d后未出现腐蚀现象,涂层的水接触角从73°提升至97°,并且涂层的耐磨性相对未添加填料的WEP涂层有所增加,在外力摩擦30次后涂层水接触角仍可保持在80°。

Abstract

Amphiphilic Janus nanoparticles of polyacrylamide-crosslinked polystyrene (PAM-cPS) were prepared using a one-step method involving emulsion interfacial polymerization and induced phase separation.These nanoparticles were used as fillers to improve the corrosion resistance,hydrophobicity,and wear resistance of waterborne epoxy resin (WEP) coatings.The effects of PAM-cPS filler content on the corrosion resistance,hydrophobicity,and mechanical properties of WEP coatings were investigated.The results showed that the addition of PAM-cPS fillers effectively enhanced the overall performance of the WEP coatings.The results demonstrated that adding PAM-cPS filler effectively enhanced the overall performance of WEP coatings.When the filler content was 3 wt.% of the WEP coating,no corrosion was observed after 75 days of neutral salt spray testing,the water contact angle of the coating increased from 73° to 97°,and the wear resistance of the coating improved compared to unfilled WEP coatings.Even after 30 cycles of external friction,the water contact angle of the coating remained at 80°.

关键词

两亲性 / Janus颗粒 / 水性环氧树脂涂层 / 耐腐蚀 / 耐磨

Key words

amphiphilic / Janus particles / waterborne epoxy resin coating / corrosion resistance / wear resistance

引用本文

引用格式 ▾
两亲性Janus填料改性水性环氧树脂涂层的制备及性能研究[J]. 化工新型材料, 2026, 54(1): 145-150 DOI:10.19817/j.cnki.issn1006-3536.2026.01.031

登录浏览全文

4963

注册一个新账户 忘记密码

参考文献

[1] 武皓天,费海林,申明锐,等.基于磷酸-硅烷偶联剂改性钢渣制备盾粉基环氧复合防腐涂层及性能[J].复合材料学报,2025,DOI:10.13801/j.cnki.fhclxb.20250113.002.
[2] 黄亚文,张田田,邓莉,等.GO/ZIF 67/水性环氧复合涂层的制备及防腐性能[J].南京工业大学学报(自然科学版),2025,47(1):40-48.
[3] 朱建康,李茂东,王良旺,等.仿生多巴胺原位聚合改性氟化石墨烯对水性环氧树脂涂层耐腐蚀性能的影响[J].表面技术,2025,54(4):110-121.
[4] 姚舜禹,王心悦,高文艺.氧化石墨烯复合涂层在金属腐蚀防护方面的研究进展[J].复合材料学报,2025,42(4):1848-1860.
[5] Wang N,Gao H,Zhang J,et al.Anticorrosive waterborne epoxy (EP) coatings based on sodium tripolyphosphate-pillared layered double hydroxides (STPP-LDHs)[J].Progress in Organic Coatings,2019,135:74-81.
[6] Li Z,Li J,Cui J,et al.Dispersion and parallel assembly of sulfonated graphene in waterborne epoxy anticorrosion coatings[J].Journal of Materials Chemistry A,2019,7(30):17937-17946.
[7] Huang H,Li M,Tian Y,et al.Exfoliation and functionalization of α-zirconium phosphate in one pot for waterborne epoxy coatings with enhanced anticorrosion performance[J].Progress in Organic Coatings,2020,138:105390.
[8] 叶展鹏.基于功能化介孔硅球的超疏水防污抗菌织物涂层的制备与性能研究[D].天津:天津大学,2022.
[9] 赵洲洋.基于两亲性Janus粒子构筑疏水抗菌棉织物[D].西安:陕西科技大学,2021.
[10] 魏玉洁.双面神二氧化硅纳米材料的制备及在皮克林乳液中的应用[D].天津:天津大学,2021.
[11] 张元霞,鲍艳,马建中.两亲性Janus粒子的合成及其在Pickering乳液中的应用[J].化学进展,2021,33(2):254-262.
[12] 冯军,张馨予,张琳林,等.两亲型Janus片的制备及提升水性涂料防护性能[J].精细化工,2025,42(4):918-928.
[13] Yang T,Li Y,Gui H,et al.Superhydrophobic coating derived from the spontaneous orientation of janus particles[J].ACS Applied Materials & Interfaces,2021,13(21):25392-25399.
[14] Fomina M,Sizova E,Nechitailo К.Antibacterial activity of CuO-Ag Janus like nanoparticles against recombinant strain Escherichia coli[J].Archives of Microbiology,2023,205(5):205.
[15] Shi S,Zhang L,Zhang G,et al.Jellyfish-like Janus polymeric cage[J].Macromolecules,2020,53(6):2228-2234.
[16] Pei L,Lin D,Yuan S,et al.A multifunctional and long-term waterborne anti-corrosion coating with excellent ‘hexagonal warrior’properties[J].Chemical Engineering Journal,2023,457:141158.
[17] 杨茂楠,孙皓,曹卫艳.环氧树脂/石墨烯纳米复合防腐底漆研究[J].化工设计通讯,2024,50(12):92-95.
[18] 陈仕箐,李会宁,严榕秋.水的渗透性对水性环氧防腐涂层性能的影响[J].现代涂料与涂装,2024,27(12):11-14,29.
[19] 陈红,胡勇,张玉红.环氧基纳米复合超疏水防腐涂层的研究进展[J].胶体与聚合物,2024,42(4):188-192.
[20] 林潼,杜蓉,郑晓军,等.Fe3O4-MoS2协同改性环氧树脂涂层的制备及耐磨防腐性能研究[J].表面技术,2024,53(20):102-117.

基金资助

国家自然科学基金(52203271);2024年“大学生创新创业训练计划项目”资助项目(X202410149117);辽宁省重点研发项目(2024JH2/102400046和2024JH2/102400048)

AI Summary AI Mindmap
PDF

341

访问

0

被引

导航
相关文章

AI思维导图

/