不同后扩链剂对无溶剂型高固含水基聚氨酯的影响

姚艾松1, 高强1, 罗海航1, 向均1, 范浩军1*, 张哲2, 高金岗2, 李超2

化工新型材料 ›› 2023, Vol. 51 ›› Issue (9) : 139 -144.

PDF
化工新型材料 ›› 2023, Vol. 51 ›› Issue (9) : 139-144. DOI: 10.19817/j.cnki.issn1006-3536.2023.09.026
新材料与新技术

不同后扩链剂对无溶剂型高固含水基聚氨酯的影响

    姚艾松1, 高强1, 罗海航1, 向均1, 范浩军1*, 张哲2, 高金岗2, 李超2
作者信息 +

Effect of different post chain extenders on solvent-free high-solid water-based polyurethane

  • Yao Aisong1, Gao Qiang1, Luo Haihang1, Xiang Jun1, Fan Haojun1, Zhang Zhe2, Gao Jingang2, Li Chao2
Author information +
文章历史 +
PDF

摘要

分别以水、乙二胺(EDA)、异佛尔酮二胺(IPDA)、二乙烯三胺(DETA)、N-β-(氨乙基)-γ-氨丙基甲基二甲氧基硅烷(KH-602)和聚醚胺(D-230)为后扩链剂,制备一系列无溶剂高固含水基聚氨酯,研究不同后扩链剂对水基聚氨酯的乳液性能(乳液稳定性、粒径大小、乳液黏度)、成膜性能(耐水耐溶剂性、力学性能、热稳定性、玻璃化转变温度)及应用性能(常温耐折牢度、热粘性、耐温性)的影响。结果表明,在较高R值(—NCO/—OH摩尔比)条件下,采用后扩链法可制备无溶剂、高固含水基聚氨酯,其热力学性能满足应用需求。其中,含环状结构的后扩链剂如IPDA可提高聚氨酯力学性能和耐温性;含交联功能的后扩链剂如DETA与KH602可提高聚氨酯耐水耐溶剂性及涂层抗热粘性和耐温性;而含柔性链的后扩链剂如D-230所制备的聚氨酯具有非常低的模量,适合制备非常柔软的聚氨酯。

Abstract

With H2O,ethylenediamine (EDA),isophorone diamine (IPDA),diethylenetriamine (DETA),N-β-(aminoethyl)-γ-aminopropylmethyldimethoxysilane (KH-602) and polyether amine (D-230) as post chain extenders,respectively,a series of solvent-free high-solid water-based polyurethanes were prepared.The effect of different post chain extenders on the emulsion properties (involving emulsion stability,particle size,emulsion viscosity),film properties (including water and solvent resistance,mechanical properties,thermal stability,glass transition temperature) of water-based polyurethane and application properties (such as folding fastness at room temperature,thermal adhesion,heat resistance) were investigated.The results showed that solvent-free and high-solid water-based polyurethane could be prepared by post-chain-extension method at high R value (the molar ratio of —NCO/—OH),and its thermodynamic properties met the application requirements.Among them,the cyclic chain extender such as IPDA could improve the mechanical properties and heat resistance of polyurethane.Post-chain extenders DETA and KH602 with crosslinking function could improve the water,solvent and heat resistance as well as thermal adhesion and heat resistance of foam coating.However,the polyurethane prepared by the chain extender containing with flexible chain,such as D-230,had a very low modulus and was suitable for preparing highly soft polyurethane.

关键词

后扩链剂 / 高固含 / 无溶剂 / 水基聚氨酯

Key words

post chain extender / high solid content / solvent-free / water-based polyurethane

引用本文

引用格式 ▾
不同后扩链剂对无溶剂型高固含水基聚氨酯的影响[J]. 化工新型材料, 2023, 51(9): 139-144 DOI:10.19817/j.cnki.issn1006-3536.2023.09.026

登录浏览全文

4963

注册一个新账户 忘记密码

参考文献

[1] 赵登位,洪江徽,黄仕林,等.聚丙二醇对高固含量磺酸型水性聚氨酯性能的影响[J].塑料工业,2021,49(8):22-26,138.
[2] 李倩,王香梅,王迎.高固含量低黏度水性聚氨酯的主要影响因素及其研究进展[J].高分子通报,2019(4):16-20.
[3] Chai C P,Ma Y F,Li G P,et al.The preparation of high solid content waterborne polyurethane by special physical blending[J].Progress in Organic Coatings,2018,115:79-85.
[4] Hou J,Ma Y,Zhang Z,et al.The relationship between solid content and particle size ratio of waterborne polyurethane[J].Coatings,2019,9(6):401.
[5] Wang K,Peng Y,Tong R B,et al.The effects of isocyanate index on the properties of aliphatic waterborne polyurethaneureas[J].Journal of Applied Polymer Science,2010,118(2):920-927.
[6] Jang J Y,Jhon Y K,Cheong I W,et al.Effect of process variables on molecular weight and mechanical properties of water-based polyurethane dispersion[J].Colloids and Surfaces A:Physicochemical and Engineering Aspects,2002,196(2-3):135-143.
[7] 张佳军,吴林波.水性聚氨酯的无溶剂合成[J].化学反应工程与工艺,2013,29(2):111-118.
[8] 黄仕林,张冠宇,洪江徽,等.无溶剂水性聚氨酯的合成及性能研究[J].塑料工业,2021,49(7):11-15.
[9] 许杨楠,王熙,吴若冰.无溶剂自乳化水性聚氨酯改性水泥复合材料的性能研究[J].功能材料,2021,52(9):9174-9182.
[10] 胡和丰,薛亮,史爱华,等.无溶剂法制备聚酯型水性聚氨酯及性能研究[J].上海大学学报(自然科学版),2008(1):91-95.
[11] 王小君,余冬梅,王静昌,等.不同二胺类后扩链剂对水性聚氨酯性能的影响[J].聚氨酯工业,2014,29(3):29-32.
[12] 张洪礼,王文君,黄毅萍,等.丙烯酸酯改性交联型水性聚氨酯胶黏剂[J].精细化工,2019,36(9):1962-1967.
[13] Song S,Peng C,Gonzalez-Olivares M A,et al.Study on hydration layers near nanoscale silica dispersed in aqueous solutions through viscosity measurement[J].Journal of Colloid & Interface Science,2005,287(1):114-120.
[14] Ninham B W,Duignan T T,Parsons D F.Approaches to hydration,old and new:insights through Hofmeister effects[J].Current Opinion in Colloid & Interface Science,2011,16(6):612-617.
[15] 李夏.高性能水性聚氨酯树脂的合成及其性能研究[D].北京:北京化工大学,2015.
[16] Nurdin N S,Saalah S,Lim A T,et al.Effect of DMPA content on colloidal stability of Jatropha oil-based waterborne polyurethane dispersion[J].IOP Conference Series Materials Science and Engineering,2020,778:012107.
[17] 白静静,王玉龙,李振中.硬段对聚酯型聚氨酯弹性体微相分离的影响[J].弹性体,2014,24(6):41-44.
[18] 柴春鹏,马一飞.不同粒径水性聚氨酯乳液的制备与性能研究[J].北京理工大学学报,2018,38(4):417-422.
[19] 孙文,许戈文,黄毅萍,等.交联型有机硅改性水性聚氨酯的制备与性能[J].中国皮革,2021,50(11):95-101.
[20] 姚周,范宏蕾,田振,等.DETA交联水性聚氨酯的制备与性能[J].中国皮革,2021,50(3):31-35.
[21] 杨清萍,吴素平,王新闻,等.可控交联度的大豆油基水性聚氨酯的制备与研究[J].涂料工业,2016,46(8):41-46.
[22] 吕小健,李廷廷,沈照羽,等.PTMG体系与PCL体系聚氨酯弹性体性能的研究[J].塑料工业,2020,48(S1):109-111,147.
[23] 曾晓燕,温翊,张伟丽,等.耐热型聚氨酯的合成制备与性能[J].功能材料,2021,52(7):7191-7196.
[24] 莫钦,张雅峰,熊林颖,等.聚氨酯胶粘剂热稳定性研究进展[J].化工新型材料,2021,49(3):207-211,220.
[25] Fei C A,Yf A,Na H A,et al.Castor oil based high transparent UV cured silicone modified polyurethane acrylate coatings with outstanding tensile strength and good chemical resistance[J].Progress in Organic Coatings,2022,163:106624.
[26] 中国聚氨酯工业协会.中国聚氨酯工业协会第十八次年会论文集[C].上海:[出版者不详],2016.
[27] Shab C,Sh A,Yw A,et al.Self-repairable,recyclable and heat-resistant polyurethane for high-performance automobile tires[J].Nano Energy,2022,95:107012.

基金资助

国家重点研发计划项目(2021YFC2101900);浙江省“尖兵”“领雁”研发攻关计划项目(2022C01190)

AI Summary AI Mindmap
PDF

555

访问

0

被引

导航
相关文章

AI思维导图

/