化工新型材料

化工新型材料 ›› 2022, Vol. 50 ›› Issue (9) : 30-36. DOI: 10.19817/j.cnki.issn1006-3536.2022.09.007

综述与专论

熔融沉积制备聚乳酸基体复合材料的研究进展

^1,2*

作者信息 +

Progress on the preparation of PLA matrix composite by fused deposition

Yang Hongwei¹, Du Jianghua^1,2, Yang Tingting¹, Yu Yingchun¹, Wang Hulan¹

Author information +

文章历史 +

Received		Published
2022-04-13		2022-09-20
Issue Date	Revised Date
2022-09-27	2022-04-13

PDF

摘要

熔融沉积增材制造(FDM)是3D打印成型技术中应用最为广泛的形式之一,表现出操作简单、实用性强、可个性化定制等特点。聚乳酸(PLA)作为一种FDM技术最常用的可生物降解材料,其制品在医学、工业等领域有潜在的广泛应用。然而,与传统成型方法比较,经FDM打印成型的PLA制品的机械力学性能较低,其使用范围受到限制。因此,重点综述了近几年FDM在制备高性能PLA基复合材料方面取得的研究进展,并提出未来的挑战和发展方向。

Abstract

Fused deposition additive manufacturing (FDM) is one of the most widely used forms of 3D printing molding technology,exhibiting characteristics such as simple operation,high practicality,and personalization.As a biodegradable material most commonly used in FDM technology,polylactic acid (PLA) has potential applications for its products in medical and industrial fields.However,the mechanical properties of PLA products printed and molded by FDM are lower compared with traditional molding methods,and limited their use.Therefore,the research progress made by FDM in the preparation of high-performance PLA-based composites in recent years was reviewed,and presented future challenges and development directions.

关键词

3D打印 / 熔融沉积 / 聚乳酸 / 复合材料 / 高性能

Key words

3D printing / fused deposition / polylactic acid / composite material / high performance

引用本文

引用格式 ▾

熔融沉积制备聚乳酸基体复合材料的研究进展[J]. 化工新型材料, 2022, 50(9): 30-36 DOI:10.19817/j.cnki.issn1006-3536.2022.09.007

登录浏览全文

4963

注册一个新账户忘记密码

参考文献

原文顺序 | 出版日期 | 本文引用

[1] 王智,于宁,黎静.熔融沉积纤维增强复合材料的研究进展[J].材料导报,2021,35(15):197-204.
[2] Rahim T N A T,Abdullah A M,Akil H M.Recent developments in fused deposition modeling-based 3D printing of polymers and their composites[J].Polymer Reviews,2019,59(4):589-624.
[3] 陈彩珠,潘汉军.3D打印高分子材料研究进展[J].工程塑料应用,2016,44(9):137-140.
[4] 蔡云冰,刘志鹏,张子龙,等.聚乳酸材料在3D打印中的研究与应用进展[J].应用化工,2019,48(6):1463-1468.
[5] Wu Z C,Zhao J,Wu W Z,et al.Radial compressive property and the proof-of-concept study for realizing self-expansion of 3D printing polylactic acid vascular stents with negative Poisson's ratio structure[J].Materials,2018,11(8):1357-1369.
[6] Bustill J P,Tumlos R,Remoto R Z.Intensity modulated radiotherapy (IMRT) phantom fabrication using fused deposition modeling (FDM) 3D printing technique[C].Singapore:World Congress on Medical Physics and Biomedical Engineering,2018.
[7] Sorocki J,Koryciak S,Piekarz I,et al.Investigation on additive manufacturing with conductive PLA filament for realisation of low-loss suspended microstrip microwave circuits[C].Kanazawa,Japan:International Conference on Electrical,Electronics and System Engineering (ICEESE 2017),2017.
[8] Jeong H,Tentzeris M M,Lim S.Frequency-tunable electromagnetic absorber by mechanically controlling substrate thickness[J].International Journal of Antennas and Propagation,2018,2018:1963051-1963057.
[9] Carkaci M E,Secmen M.Design and prototype manufacturing of a feed system for Ku-band satellite communication by using 3D FDM/PLA printing and conductive paint technology[J].International Journal of RF and Microwave Computer-Aided Engineering,2019,30(4):22062-22076.
[10] 邓富泉,张丽,刘少祯,等.单向连续碳纤维-玻璃纤维层间混杂增强环氧树脂基复合材料的力学性能[J].复合材料学报,2018,35(7):1867-1863.
[11] Butt J,Hewavidan Y,Mohaghegh V,et al.Hybrid manufacturing and experimental testing of glass fiber enhanced thermoplastic composites[J].Journal of Manufacturing and Materials Processing,2019,3(4):96-104.
[12] 尹兴,孙诚,王蕊,等.玻璃纤维/聚乳酸复合包装薄膜的制备及表征[J].包装工程,2016,37(13):19-23.
[13] Akindoyo J O,Beg M D,Ghazali S,et al.Simultaneous impact modified and chain extended glass fiber reinforced poly(lactic acid) composites:mechanical,thermal,crystallization,and dynamic mechanical performance[J].Journal of Applied Polymer Science,2020,138:49752-49765.
[14] 孔甜甜,薛平,蔡建臣,等.喷嘴结构对FDM制备玻璃纤维增强聚乳酸复合材料性能的影响[J].塑料工业,2017,45(8):39-43.
[15] 蔡冯杰,祝成炎,田伟,等.3D打印成型的玻璃纤维增强聚乳酸基复合材料[J].纺织学报,2017,38(10):13-18.
[16] Chen K,Yu L G,Cui Y H,et al.Optimization of printing parameters of 3D-printed continuous glass fiber reinforced polylactic acid composites[J].Thin-Walled Structures,2021,164:107717-107725.
[17] Wang Y S,Kong D K,Zhang Q,et al.Process parameters and mechanical properties of continuous glass fiber reinforced composites-polylactic acid by fused deposition modeling[J].Journal of Reinforced Plastics and Composites,2021,40(17-18):686-698.
[18] Akhoundi B,Behravesh A H,Saed A B.Improving mechanical properties of continuous fiber-reinforced thermoplastic composites produced by FDM 3D printer[J].Journal of Reinforced Plastics & Composites,2019,38(3):99-116.
[19] 崔永辉,贾明印,薛平,等.连续玻璃纤维增强PLA复合材料3D打印技术研究[J].塑料工业,2020,48(1):51-54,77.
[20] Liang L,Huang T,Yu S X,et al.Study on 3D printed graphene/carbon fiber multi-scale reinforced PLA composites[J].Materials Letters,2021,300:130173-130176.
[21] Arunkumar N,Sathishkumar N,Sanmugapriya S S,et al.Study on PLA and PA thermoplastic polymers reinforced with carbon additives by 3D printing process[J].Materials Today:Proceedings,2021,46:8871-8879.
[22] Gohar S,Hussain G,Ali A,et al.Mechanical performance of honeycomb sandwich structures built by FDM printing technique[J].Journal of Thermoplastic Composite Materials,2021,3:1-19.
[23] Reverte J M,Caminerom Á,Chacon J M,et al.Mechanical and geometric performance of PLA-based polymer composites processed by the fused filament fabrication additive manufacturing technique[J].Materials,2020,13(8):1924-1939.
[24] Dou H,Cheng Y Y,Ye W G,et al.Effect of process parameters on tensile mechanical properties of 3D printing continuous carbon fiber-reinforced PLA composites[J].Materials,2020,13(17):3850-3864.
[25] Saharudin M S,Hajnys J,Kozior T,et al.Quality of surface texture and mechanical properties of PLA and PA-based material reinforced with carbon fibers manufactured by FDM and CFF 3D printing technologies[J].Polymers,2021,13(11):1671-1687.
[26] Li H M,Liu B S,Ge L,et al.Mechanical performances of continuous carbon fiber reinforced PLA composites printed in vacuum[J].Composites Part B,2021,225:109277-109287.
[27] Dong K,Armad M,Cui Z Y,et al.Electro-induced shape memory effect of 4D printed auxetic composite using PLA/TPU/CNT filament embedded synergistically with continuous carbon fiber:a theoretical experimental analysis[J].Composites Part B:Engineering,2021,220:108994-109004.
[28] Qiao J,Li Y R,Li L Q.Ultrasound-assisted 3D printing of continuous fiber-reinforced thermoplastic (FRTP) composites[J].Additive Manufacturing,2019,30:100926-100936.
[29] 鲁浩,李楠,王海波,等.碳纳米管复合材料的3D打印技术研究进展[J].材料工程,2019,47(11):19-31.
[30] Zhou X,Deng J R,Fang C Q,et al.Additive manufacturing of CNTs/PLA composites and the correlation between microstructure and functional properties[J].Journal of Materials Science & Technology,2021,60(1):27-34.
[31] 曾润鹏,方景辉,董智贤.聚乳酸/碳纳米管复合材料的结晶及流变性能[J].广东化工,2021,48(2):3-5.
[32] Patanwala H S,Hong D,Vora S R,et al.The microstructure and mechanical properties of 3D printed carbon nanotube-polylactic acid composites[J].Polymer Composites,2018,39:1060-1071.
[33] 仪登豪,冯英豪,张锦芳,等.3D打印石墨烯增强复合材料研究进展[J].材料导报,2020,34(9):9086-9094.
[34] 许婧,邢悦,郝思嘉,等.石墨烯/聚合物基复合材料3D打印成型研究进展[J].材料工程,2018,46(7):1-11.
[35] Qian Y,Li C,Qi Y Z,et al.3D printing of graphene oxide composites with well controlled alignment[J].Carbon,2021,171:777-784.
[36] Kim H,Lee S.Characterization of electrical heating performance of CFDM 3D-printed graphene/polylactic acid (PLA) horseshoe pattern with different 3D printing directions[J].Polymers,2020,12(12):2955-2970.
[37] Chen Q Y,Mangadlao J D,Walla J D,et al.3D Printing biocompatible polyurethane/poly(lactic acid)/graphene oxide nanocomposites:anisotropic properties[J].ACS Applied Materials & Interfaces,2017,9(4):4015-4023.
[38] Zhang D,Chi B H,Li B W,et al.Fabrication of highly conductive graphene flexible circuits by 3D printing[J].Synthetic Metals,2016,217:79-86.
[39] Bustillos J,Montero D,Nautiyal P,et al.Integration of graphene in poly(lactic) acid by 3D printing to develop creep and wear-resistant hierarchical nanocomposites[J].Polymer Composites,2018,39(11):3877-3888.
[40] Frone A,Batalu D B,Chiulan I,et al.Morpho-structural,thermal and mechanical properties of PLA/PHB/cellulose biodegradable nanocomposites obtained by compression molding,extrusion,and 3D printing[J].Nanomaterials,2020,10(1):51-70.
[41] Zhan J H,Wang G L,Li J,et al.Effect of the compatilizer and chemical treatments on the performance of poly(lactic acid)/ramie fiber composites[J].Composites Communications,2021,27:100843-100849.
[42] Rahman A,Fehrenbach J,Ulven C,et al.Utilization of wheat-bran cellulosic fibers as reinforcement in bio-based polypropylene composite[J].Industrial Crops & Products,2021,172:114028-114037.
[43] Zhu L X,Qiu J H,Liu W D,et al.Mechanical and thermal properties of rice straw/PLA modified by nano attapulgite/PLA interfacial layer[J].Composites Communications,2019,13:18-21.
[44] Yu W W,Dong L L,Li W,et al.Effects of rice straw powder (RSP) size and pretreatment on properties of FDM 3D-printed RSP/poly(lactic acid) biocomposites[J].Molecules,2021,26(11):3234-3245.
[45] Franco-Urouiza E A,Escamilla Y R,Lianas P I A.Characterization of 3D printing on jute fabrics[J].Polymers,2021,13(19):3202-3212.
[46] Rojas-Martínez L E,Flores-Hernandez C G,Lopez-Marin L M,et al.3D printing of PLA composites scaffolds reinforced with keratin and chitosan:effect of geometry and structure[J].European Polymer Journal,2020,141:110088-110097.
[47] Sankaravel S G,Syed R B,Manivachakan V.In vitro and mechanical characterization of PLA/egg shell biocomposite scaffold manufactured using fused deposition modeling technology for tissue engineering applications[J].Polymer Composites,2021,1:173-186.
[48] Liu H,He H,Peng X D,et al.Three-dimensional printing of poly(lactic acid) bio-based composites with sugarcane bagasse fiber:effect of printing orientation on tensile performance[J].Polymers for Advanced Technologies,2019,30(4):910-922.
[49] Jamadi A H,Razalin,Petru M,et al.Effect of chemically treated kenaf fibre on mechanical and thermal properties of PLA composites prepared through fused deposition modeling (FDM)[J].Polymers,2021,13(19):3299-3318.
[50] Song X H,He W,Qin H D,et al.Fused deposition modeling of poly(lactic acid)/macadamia composites-thermal,mechanical properties and scaffolds[J].Materials,2020,13(2):258-271.
[51] Singh R,Kumar R,Pawanpreet,et al.On mechanical,thermal and morphological investigations of almond skin powder-reinforced polylactic acid feedstock filament[J].Journal of Thermoplastic Composite Materials,2022,35(2):230-248.
[52] Jing H S,He H,Liu H,et al.Study on properties of polylactic acid/lemongrass fiber biocomposites prepared by fused deposition modeling[J].Polymer Composites,2021,42(2):973-986.
[53] Tao Y B,Wang H L,Li Z L,et al.Development and application of wood flour-filled polylactic acid composite filament for 3D printing[J].Materials,2017,10(4):339-344.