[1] Cavdar K,Bingol M.Investigation of mechanical properties of basalt particle-filled SMC composites[J].International Journal of Polymer Science,2016,2016:1-6.
[2] Yildizel S A.Mechanical and thermal behaviors comparison of basalt and glass fibers reinforced concrete with two different fiber length distributions[J].Challenge Journal of Structural Mechanics,2017,3(4):155-159.
[3] Guo Z,Wan C,Xu M,et al.Review of basalt fiber-reinforced concrete in China:alkali resistance of fibers and static mechanical properties of composites[J].Advances in Materials Science and Engineering,2018,2018:1-11.
[4] Förster T,Hao B,Mäder E,et al.CVD-grown CNTs on basalt fiber surfaces for multifunctional composite interphases[J].Fibers,2016,4(4):28.
[5] Altabey W A.Free vibration of basalt fiber reinforced polymer (FRP) laminated variable thickness plates with intermediate elastic support using finite strip transition matrix (FSTM) method[J].Journal of Vibroengineering,2017,19(4):2873-2885.
[6] Li Y,Li Z,Wan J,et al.Mechanical and tribological performance of chopped basalt fiber/acrylonitrile-butadiene rubber composites[J].Polymer Composites,2017,40(2):630-637.
[7] Patel N,Patel K,Gohil P,et al.Investigations on mechanical strength of hybrid basalt/glass polyester composites[J].International Journal of Applied Engineering Research,2018,13(6):4083-4088.
[8] Liu H X,Liu G J,Wang X Z,et al.Effect of cross-sectional aspect ratio and basalt fiber-reinforced polymer-confined number on axial compression behavior of short columns[J].Journal of Reinforced Plastics and Composites,2015,34(10):782-794.
[9] Kumar M V.Comparison study of basalt fiber and steel fiber as additives to concrete[J].International Journal for Research in Applied Science and Engineering Technology,2017,5(8):6-14.
[10] Choi J I,Lee B Y.Bonding properties of basalt fiber and strength reduction according to fiber orientation[J].Materials,2015,8(10):6719-6727.
[11] Dai L,Jiang J,Li H,et al.Electrical conductivity of hydrous natural basalts at high temperatures and pressures[J].Journal of Applied Geophysics,2015,112:290-297.
[12] Thorhallsson E R,Snaebjornsson J T.Basalt fibers as new material for reinforcement and confinement of concrete[J].Solid State Phenomena,2016,249:79-84.
[13] Zhang Z,Wang Y,Sun Y,et al.Analysis and experimental study on the strain transfer mechanism of an embedded basalt fiber-encapsulated fiber Bragg grating sensor[J].Optical Engineering,2017,56(1):17105-17107.
[14] Shaikh F,Haque S.Behaviour of carbon and basalt fibres reinforced fly ash geopolymer at elevated temperatures[J].International Journal of Concrete Structures and Materials,2018,12(1):1-12.
[15] Mengal A N,Akilu S,Siddique M.Strength enhancement of basalt fiber-reinforced epoxy laminates with biowaste catalyst free carbon nanospheres[J].J Appl Energ Sci,2016,6(2):105-110.
[16] Hao B,Förster T,Mäder E,et al.Modification of basalt fibre using pyrolytic carbon coating for sensing applications[J].Composites Part A:Applied Science and Manufacturing,2017,101:123-128.
[17] Mittal G,Rhee K Y.Chemical vapor deposition-based grafting of CNTs onto basalt fabric and their reinforcement in epoxy-based composites[J].Composites Science and Technology,2018,165:84-94.
[18] Vikas G,Sudheer M.A review on properties of basalt fiber reinforced polymer composites[J].American Journal of Materials Science,2017,7(5):156-165.
[19] Di Ruocco G.Basalt fibers:the green material of the XXI-century,for a sustainable restoration of historical buildings[J].International Journal of Architectural Technology and Sustainability,2016,1(2):25.
[20] Mittal G,Rhee K Y.Hierarchical structures of CNT@basalt fabric for tribological and electrical applications:impact of growth temperature and time during synthesis[J].Composites Part A:Applied Science and Manufacturing,2018,115:8-21.
[21] Wang Z,Yang Z,Yang Y,et al.Flexural fatigue behavior of a pultruded basalt fiber reinforced epoxy plate subjected to elevated temperatures exposure[J].Polymer Composites,2018,39(5):1731-1741.
[22] 王欣,罗学刚,张盼盼,等.玄武岩催化甲烷裂解制C₂烃[J].精细化工,2016,33(10):1099-1104.
[23] Do J Y,Im Y,Kwak B S,et al.Preparation of basalt fiber@perovskite PbTiO₃ core-shell composites and their effects on CH₄ production from CO₂ photoreduction[J].Ceramics International,2016,42(5):5942-5951.
[24] 汪靖凯,杭美艳,李可庆,等.玄武岩纤维/TiO₂复合材料的制备及表征[J].材料科学与工艺,2017,25(2):79-84.
[25] 杭美艳,汪靖凯.玄武岩纤维/TiO₂复合材料的制备及光催化性能研究[J].功能材料,2018,5(49):5011-5015.
[26] 罗大军,徐彩云,高红娇,等.TiO₂负载玄武岩纤维毡复合材料的制备及其光催化性能[J].硅酸盐通报,2014,33(10):2493-2497.
[27] Wang J,Liang X,Chen P,et al.Microstructure and photocatalytic properties of Ag/Ce⁴⁺/La³⁺ co-modified TiO₂/basalt fiber for ammonia-nitrogen removal from synthetic wastewater[J].Journal of Sol-Gel Science and Technology,2016,82(1):289-298.
[28] Karamshahi Z,Ghorbani Vaghei R.Efficient synthesis of multiply substituted furans using BF@propyl/dopamine/Pd as a green catalyst[J].Applied Organometallic Chemistry,2020,34(4):5530-5540.
[29] Krasnikova I V,Mishakov I V,Vedyagin A A,et al.Surface modification of microfibrous materials with nanostructured carbon[J].Materials Chemistry and Physics,2017,186:220-227.
[30] 牛永红,田一鸣.Ni-Zn/玄武岩催化剂生物质催化气化实验[J].农业机械学报,2019,50(6):331-337.
[31] Rakitskaya T L,Kiose T A,Oleksenko L P,et al.Influence of water content in the Pd(Ⅱ)-Cu(Ⅱ) catalyst fixed on acid-modified basalt tuff on its activity in the carbon monoxide oxidation by oxygen[J].Russian Journal of Applied Chemistry,2012,85(9):1339-1344.
[32] Zhang X,Zhou X,Ni H,et al.Surface modification of basalt fiber with organic/inorganic composites for biofilm carrier used in wastewater treatment[J].ACS Sustainable Chemistry & Engineering,2018,6(2):2596-2602.
[33] Lebukhova N V,Kirichenko E A,Chigrin P G.Thermochemical stability and adhesive strength of CuMoO₄/basalt fiber composite catalysts[J].Inorganic Materials,2015,51(5):460-465.
[34] 袁燕,范汶鑫,王延相,等.玄武岩纤维表面生长碳纳米管及其复合材料性能的研究[J].材料导报,2016,30(28):32-40.
[35] Talebi Z,Habibi N,Zadhoush A.Surface modification of basalt fibers by nanostructured silica aerogel[J].Fibers and Polymers,2018,19(9):1843-1849.
[36] Wang J,Zhou S,Huang J,et al.Interfacial modification of basalt fiber filling composites with graphene oxide and polydopamine for enhanced mechanical and tribological properties[J].RSC Advances,2018,8(22):12222-12231.
[37] Kim D,Mittal G,Kim M,et al.Surface modification of MMT and its effect on fatigue and fracture behavior of basalt/epoxy based composites in a seawater environment[J].Applied Surface Science,2019,473:55-58.
[38] 徐吉成,张晓颖,廖敏,等.改性玄武岩纤维的制备及其挂膜性能[J].复合材料学报,2018,35(12):3434-3440.
[39] Knot'ko A V,Sitanskaya A V,Sud'in V V,et al.Comparing the effects of oxidation heat treatment and lithium enrichment on the corrosion resistance of basalt glass fiber[J].Protection of Metals and Physical Chemistry of Surfaces,2017,52(7):1187-1192.
[40] 王晓东,云斯宁,张太宏,等.硅烷偶联剂表面改性玄武岩纤维增强复合材料研究进展[J].材料导报,2017,31(3):77-83.
[41] 许志至,许小红,吴向阳,等.纳米SiO₂分散液表面改性玄武岩纤维载体的研究[J].合成纤维,2016,45(10):15-17.
[42] Kuzmin K L,Timoshkin I A,Gutnikov S I,et al.Effect of silane/nano-silica on the mechanical properties of basalt fiber reinforced epoxy composites[J].Composite Interfaces,2017,24(1):13-34.
[43] 曾瑶,俞科静,钱坤.玄武岩纤维表面改性及界面效应[J].材料科学与工程学报,2019,37(4):612-618.
[44] Azizi H,Eslami-Farsani R.Study of mechanical properties of basalt fibers/epoxy composites containing silane-modified nanozirconia[J].Journal of Industrial Textiles,2019,51(4):1-15.
[45] Khosravi H,Eslami-Farsani R.On the mechanical characterizations of unidirectional basalt fiber/epoxy laminated composites with 3-glycidoxypropyltrimethoxysilane functionalized multi-walled carbon nanotubes-enhanced matrix[J].Journal of Reinforced Plastics and Composites,2015,35(5):421-434.
[46] Gong G Y,Liang J C,Yu K F.Study on surface modified basalt fiber reinforced unsaturated polyester resin with silica-carbon black[C].The 3rd International Conference on New Material and Chemical Industry,Sanya,China.IOP Conference Series:Materials Science and Engineering,2019,479:012092.
[47] Xiang Y,Xie Y,Long G.Effect of basalt fiber surface silane coupling agent coating on fiber-reinforced asphalt:from macro-mechanical performance to micro-interfacial mechanism[J].Construction and Building Materials,2018,179:107-116.
[48] Zhang X,Wei J,Zhou X,et al.Evaluation of modified basalt fiber as biological carrier media for wastewater treatment with the extended DLVO theory model[J].Environmental Science and Pollution Research,2019,26(29):29789-29798.
[49] 周茂荣,刘美红,李遇贤,等.玄武岩纤维的改性及其对非石棉垫片性能影响[J].非金属矿,2019,42(5):9-12.
[50] 王林,王梦尧,王佩勋,等.偶联剂改性玄武岩纤维增强水泥基复合材料力学性能[J].材料导报,2019,33(Z2):273-277.
[51] Iorio M,Santarelli M L,González-Gaitano G,et al.Surface modification and characterization of basalt fibers as potential reinforcement of concretes[J].Applied Surface Science,2018,427:1248-1256.
[52] Wu W,Zuo H.Silicone rubber composites modified by chopped basalt fibers treated with coupling agent[J].Silicon,2018,10(6):2555-2559.
[53] Chen Y,Li F,Xiao Yiyue,et al.Study on surface modification of basalt fiber and properties of BF/EP-PU composites[C]//2012 IE 10th International Conference on the Properties and Aplications of Dielectric Materials.Bangalore,India,2012.
[54] 李静,申士杰,李伟娜,等.酸刻蚀对玄武岩纤维表面偶联剂吸附量及纤维/环氧树脂复合材料力学性能的影响[J].复合材料学报,2014,31(4):888-894.
[55] Liu S,Wu G,Yu J,et al.Surface modification of basalt fiber (BF) for improving compatibilities between BF and polylactic acid (PLA) matrix[J].Composite Interfaces,2018,26(4):275-290.
[56] Savovic J,Momcilovic M,Zivkovic S,et al.LIBS analysis of geomaterials:comparative study of basalt plasma induced by TEA CO₂ and Nd∶YAG laser in air at atmospheric pressure[J].Journal of Chemistry,2017,2017:1-9.
[57] Yu S,Oh K H,Hong S H.Enhancement of the mechanical properties of basalt fiber-reinforced polyamide 6,6 composites by improving interfacial bonding strength through plasma-polymerization[J].Composites Science and Technology,2019,182:107756-12.
[58] Kurniawan D,Kim B S,Lee H Y,et al.Plasma polymerization of basalt fiber/polylactic acid composites:effects on mechanical properties[C]//18^th International Conference on Composite Materials.Seoul,Korea,2011.