综述了国内外环氧树脂减摩耐磨研究进展,阐述了单一填料填充改性环氧树脂(无机填料和有机填料)、多组分填料填充改性环氧树脂(无机/有机复合填充和润滑相/增强相复合填充)、环氧树脂基表面喷涂及可再生能源改性环氧树脂等改性方法,并分析了其磨损机理、相关研究进展及展望。
The research progress on friction reduction and wear resistance of epoxy resin(EP) at home and abroad was reviewed.The modification method of the single filler modified EP (inorganic filler,organic filler),multi-component filler modified epoxy resin (inorganic/organic composite filling,lubrication/reinforced composite filling) EP base surface spraying and EP modified by renewable energy were described.The wear mechanism,research progress and prospect were analyzed.
[1] Smr A,Jpa B,Kya B,et al.Toughened bioepoxy blends and composites based on poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol) triblock copolymer and sisal fiber fabrics:a new approach-ScienceDirect[J].Construction and Building Materials,2021,271:121843.
[2] Kwon W,Han M,Kim J,et al.Comparative study on toughening effect of PTS and PTK in various epoxy resins[J].Polymers,2021,13(4):518.
[3] Li Y,Yuan J,He G,et al.Space-confined thermal disintegration synthesis of graphene-copper nanohybrids for enhanced tribological behaviors of epoxy-based composites[J].Polymer Composites,2021,42(5):2445-2456.
[4] 于思荣,孙伟松,唐梦龙,等.石墨烯的改性及其环氧树脂基复合材料的摩擦磨损性能[J].功能材料,2019,50(11):11199-11204,11210.
[5] 李孟宇,马雅婷,李巧玲.耐磨润滑协同作用改性环氧树脂涂层的制备与研究[J].化工新型材料,2017,45(11):90-92.
[6] 张小博.纳米Al2O3/SiO2混杂填充环氧树脂耐磨材料的制备与研究[J].山东化工,2018,47(17):1-2,4.
[7] 姜一鸣,刘琨,唐学昆,等.碳化硅增强环氧树脂复合材料的制备及性能研究[J].人工晶体学报,2018,47(9):1938-1943.
[8] Baptista R,Mendão A,Rodrigues F,et al.Effect of high graphite filler contents on the mechanical and tribological failure behavior of epoxy matrix composites[J].Theoretical and Applied Fracture Mechanics,2016,85:113-124.
[9] Fernández-Álvarez M,Velasco F,Bautista A.Epoxy powder coatings hot mixed with nanoparticles to improve their abrasive wear[J].Wear,2020,448-449:203211.
[10] 李苗苗,陈平,王辉,等.粉煤灰微珠填充环氧树脂复合涂层耐磨性能的研究[J].材料导报,2017,31(4):36-40.
[11] Awwad K Y E,Yousif B F,Fallahnezhad K,et al.Influence of graphene nanoplatelets on mechanical properties and adhesive wear performance of epoxy-based composites[J].Friction,2021,9(4):856-875.
[12] 代剑锋,陈诚,徐建晖.路用耐磨型环氧树脂材料性能研究[J].山西建筑,2017,43(18):98-100.
[13] Li Fengkun,Yan Yuqin,Li Shuqin,et al.Enhanced tribological properties of epoxy-based lubricating coatings using carbon nanotubes-ZnS hybrid[J].Surface and Coatings Technology,2018,344:154-162.
[14] 田晋,高立,蔡滨,等.功能化纳米SiO2改性环氧树脂复合材料及其摩擦磨损行为与机制[J].材料工程,2019,47(11):92-99.
[15] 耿宏章,耿文铭,李广芬.碳纳米管/环氧树脂复合材料摩擦磨损性能[J].徐州工程学院学报(自然科学版),2018,33(2):41-46.
[16] Li Fengkun,Yan Yuqin,Li Shuqin,et al.Wear resistance of Al2O3/WC-Co/epoxy coatings on TC18 (Ti-5Al-5Mo-5V-1Cr-1Fe) alloy[J].Surface and Coatings Technology,2019,374:1100-1107.
[17] Zhou H,Wang H,Du X,et al.Facile fabrication of large 3D graphene filler modified epoxy composites with improved thermal conduction and tribological performance[J].Carbon,2018,139:1168-1177.
[18] 宋月,王欣,牛耕芜,等.纤维素微纤丝复合环氧树脂水性涂料制备工艺及性能研究[J].应用化工,2020,49(7):1654-1657.
[19] Shettar M,Kowshik C S S,Manjunath M,et al.Experimental investigation on mechanical and wear properties of nanoclay-epoxy composites[J].Journal of Materials Research and Technology,2020,9(4):9108-9116.
[20] Tian J,Li C,Xian G.Reciprocating friction and wear performances of nanometer sized-TiO2 filled epoxy composites[J].Polymer Composites,2021,42(4):2061-2072.
[21] 王春红,王利剑,任子龙,等.SiO2-竹纤维协同改性对环氧树脂基复合材料摩擦磨损性能的影响[J].复合材料学报,2019,36(7):1633-1639.
[22] 吕学超,刘华,段沙沙,等.改性环氧树脂超疏水涂层的制备与研究[J].河北大学学报(自然科学版),2019,39(4):386-394.
[23] Rahsepar M,Mohebbi F.Enhancement of the wear resistance of epoxy coating in presence of MBT-loaded mesoporous silica nanocontainers[J].Tribology International,2018,118:148-156.
[24] 丁军.无机填料改性端羟基液体丁腈橡胶/环氧树脂复合材料的耐磨性能[J].合成橡胶工业,2014,37(2):84-86.[25] 孙琳,曹志伟,林化强,等.含羟基柔性链段纳米二氧化硅的制备及其对高速列车涂层性能的影响研究[J].应用化工,2016,45(11):2102-2106.
[26] Wang Rui,Wang Huaiyuan,Sun Liyuan,et al.The fabrication and tribological behavior of epoxy composites modified by the three-dimensional polyurethane sponge reinforced with dopamine functionalized carbon nanotubes[J].Applied Surface Science,2016,360:37-44.
[27] 马雅婷,李孟宇,李巧玲.耐高温PAI/EP涂层的制备及摩擦学性能研究[J].应用化工,2016,45(12):2221-2224.
[28] Wang C,Wang H,Liu Z,et al.A novel multifunctional coating prepared by internal and external inhomogeneous modification of porous fillers[J].Progress in Organic Coatings,2018,119:57-64.
[29] 杨帆,冯拉俊,李光照,等.SiO2/EP梯度耐磨复合涂层的制备及其性能研究[J].腐蚀科学与防护技术,2015,27(5):454-458.
[30] 孟雨辰,王彦辉,荆蓉,等.海洋工程复合材料用防滑耐磨涂层研究[J].涂料工业,2020,50(3):67-71.
[31] 李迎春,李庆林,邱明,等.喷涂法制备PTFE基减摩耐磨涂层工艺参数的优化[J].机械工程材料,2017,41(9):73-76.
[32] 蒋卫中,龚红升,冼成安,等.耐磨超疏水疏油复合涂层的制备及性能[J].广州化工,2016,44(16):60-62,72.
[33] Sharma H,Misra J P,Singh I.Friction and wear behaviour of epoxy composites reinforced with food waste fillers[J].Composites Communications,2020,22:100436.
[34] Panchal M,Raghavendra G,Reddy P S K,et al.Study of moisture absorption and its effect on erosion wear behavior of eggshell nanoparticulate epoxy composite[J].Materials Today:Proceedings,2020,33(8):5746-5750.
[35] Suthan R,Jayakumar V,Bharathiraja G.Wear analysis of bio-fillers reinforced epoxy composites[J].Materials Today:Proceedings,2020,22(3):793-798.
[36] Ruggiero A,Valášek P,Müller M,et al.Tribological investigation of epoxy/seed particle composite obtained from residues of processing Jatropha Curcas L.fruits[J].Composites Part B,2019,167:654-667.
基金资助
国家自然科学基金(51175149);清华大学摩擦学国家重点实验室开放基金(SKLTKF15B02)
PDF
