化工新型材料

化工新型材料 ›› 2022, Vol. 50 ›› Issue (4) : 1-5. DOI: 10.19817/j.cnki.issn1006-3536.2022.04.001

综述与专论

聚醚醚酮复合材料改性及其摩擦学性能与应用研究进展

^1,2

^1,2*

^1,2

作者信息 +

Research progress on modification,tribological property and application of PEEK composite

Huang Suling^1,2, Pang Xianjuan^1,2, Yue Shiwei^1,2, Xie Jinmeng^1,2, Wang Shuai¹, Song Chenfei¹, Chen Deqiang¹, Zhang Yongzhen¹

Author information +

文章历史 +

Received		Published
2021-11-17		2022-04-20
Issue Date	Revised Date
2022-04-29	2021-11-17

PDF

摘要

简要介绍了聚醚醚酮(PEEK)特种工程塑料的特点,特殊的分子构型使其具有突出的综合性能。重点介绍了近些年PEEK的改性研究进展,包括填充改性、高聚物共混改性及表面改性,分析了不同改性技术的改性原理、不同影响因素下PEEK复合材料的磨损机制和转移膜生长机制。最后,展望了PEEK未来研究的方向。

Abstract

The characteristics of poly ether ether ketone (PEEK) special engineering plastics were briefly introduced.The special molecular configuration made it had outstanding comprehensive properties.The research progress of PEEK modification in recent years was mainly introduced,including filling modification,polymer blending modification and surface modification.The modification principles of different modification technologies,wear mechanism and transfer film growth mechanism of PEEK under different influencing factors were analyzed.Finally,the future research direction of PEEK was prospected.

关键词

聚醚醚酮 / 复合材料 / 改性 / 转移膜 / 摩擦磨损 / 应用

Key words

PEEK / composite / modification / transfer membrane / friction and wear property / application

引用本文

引用格式 ▾

聚醚醚酮复合材料改性及其摩擦学性能与应用研究进展[J]. 化工新型材料, 2022, 50(4): 1-5 DOI:10.19817/j.cnki.issn1006-3536.2022.04.001

登录浏览全文

4963

注册一个新账户忘记密码

参考文献

原文顺序 | 出版日期 | 本文引用

[1] Yan Y,Mao Y,Li B,et al.Machinability of the thermoplastic polymers:PEEK,PI,and PMMA[J].Polymers,2020,13(1):69-83.
[2] Hron R,Kadlec M,Rek R.Effect of the test procedure and thermoplastic composite resin type on the curved beam strength[J].Materials,2021,14(2):352-364.
[3] Patel P,Hull T R,Mccabe R W,et al.Mechanism of thermal decomposition of poly(ether ether ketone)(PEEK) from a review of decomposition studies[J].Polymer Degradation and Stability,2010,95(5):709-718.
[4] 张婷.高性能热塑性复合材料在大型客机结构件上的应用[J].航空制造技术,2013,435(15):32-35.
[5] Wyatt H,Elliott M,Revill P,et al.The effect of engineered surface topography on the tribology of CFR-PEEK for novel hip implant materials[J].Biotribology,2016,7:22-30.
[6] Zhong G,Vaezi M,Mei X,et al.Strategy for controlling the properties of bioactive poly-ether-ether-ketone/hydroxyapatite composites for bone tissue engineering scaffolds[J].ACS omega,2019,4(21):19238-19245.
[7] Rajeswararao Kvs.Investigation of wear behavior of biopolymers for total knee replacements through invitro experimentation[J].International Journal of Engineering Education,2020,33(8):1560-1566.
[8] 张树康,车清论,郭丽和,等.聚合物复合材料的摩擦学行为影响因素[J].塑料,2020,49(3):134-138.
[9] Mohammed Abdul Samad.Recent advances in UHMWPE/ UHMWPE nano-composite/UHMWPE hybrid nano-composite polymer coatings for tribological applications:a comprehensive review[J].Polymers,2021,13(4):608-646.
[10] Zhao X,Xing D,Liu Y.Improving surface wettability and lubrication of poly-ether-ether ketone (PEEK) by combining with polyvinyl alcohol(PVA) hydrogel[J].Journal of the Mechanical Behavior of Biomedical Materials,2018,82:27-34.
[11] 温诗铸,黄平,田煜,等.摩擦学原理[M].北京:清华大学出版社,2018,268-290.
[12] Guo L,Pei X,Zhao F,et al.Tribofilm growth at sliding interfaces of PEEK composites and steel at low velocities[J].Tribology International,2020,151:106456.
[13] Kozlov G V,Dolbin I V,Davydova V V.Dependence of the tribotechnical characteristics of poly-etherketone/graphene nanocomposites on the fractal dimension of the filler[J].Journal of Friction and Wear,2020,41(2):174-177.
[14] Kumar V,Kumar R,Annamalai V E.Wear and tribofilm characterization of bamboo CNT (B-CNT)-peek composite with incremental blending of submicron synthetic diamond particles[J].Wear,2020,1-2:466-467.
[15] Hiraki K,Mizobe K,Matsueda T,et al.Friction coefficient and wear of PEEK-PTFE hybrid radial ball bearings under dry conditions[J].Materials Science Forum,2021,1020:114-119.
[16] Nilsson D,Prakash B.Static/dynamic friction and wear of some selected polymeric materials for conformal tribo-pairs under boundary lubrication conditions[J].Friction,2013,1(3):232-241.
[17] Cowie Raelene M,Briscoe Adam,Fisher John,et al.Wear and Friction of UHMWPE-on-PEEK OPTIMA[J].Journal of the Mechanical Behavior of Biomedical Materials,2019,89:65-71.
[18] Wang B,Yu S,Mao J,et al.Effect of basalt fiber on tribological and mechanical properties of polyether-ether-ketone(PEEK) composites[J].Composite Structures,2021,266(1):113847.
[19] 王文东,何长昭,张超,等.高导热六方氮化硼/聚醚醚酮复合材料摩擦磨损性能研究[J].化工新型材料,2020,48(8):66-70.
[20] Kumar D,Rajmohan T.Effect of MWCNT particles on wear loss in dry sliding wear of PEEK matrix composites[J].Materials Today:Proceedings,2019,16(2):800-807.
[21] 祁渊,龚俊,杨东亚,等.纳米Al₂O₃填料增强PEEK-PTFE复合材料基于环-块摩擦结构的摩擦过程研究[J].材料导报,2019,33(10):1756-1761.
[22] 宋恩敏,卞达,赵永武,等.不同工艺条件下PEEK/CF复合材料摩擦磨损特性[J].工程塑料应用,2021,49(5):53-58.
[23] 徐培琦,肖人彬,贾婷,等.PEEK/SiC-BN导热复合材料的制备与性能[J].现代塑料加工应用,2019,31(2):30-32.
[24] 史伟杰,赵海霞,罗小辉,等.粉末冶金复合材料水润滑条件下的摩擦学性能[J].华中科技大学学报:自然科学版,2019,47(6):52-56.
[25] 何奎霖,盛晨兴,郭智威,等.极端工况下不同水润滑轴承材料摩擦磨损性能对比研究[J].润滑与密封,2019,44(3):60-64.
[26] 徐培琦,徐静,宁洋,等.玻纤含量对聚醚醚酮/玻纤复合材料性能的影响[J].塑料科技,2018,46(6):73-77.
[27] Chen B,Wang J,Yan F.Comparative investigation on the tribological behaviors of CF/PEEK composites under sea water lubrication[J].Tribology International,2012,52(3):170-177.
[28] 刘爱萍,付华,刘圣华,等.不锈钢纤维/碳纤维混杂增强聚醚醚酮基摩擦材料的制备与性能[J].机械工程材料,2007,31(2):36-39.
[29] 王万成,何彬,姜朋飞,等.聚醚醚酮复合材料在不同水环境下的摩擦磨损行为[J].润滑与密封,2019,44(3):117-122.
[30] Liu H,Su X,Tao J,et al.Effect of SiO₂ nanoparticles ecorated SCF on mechanical and tribological properties of cenosphere/SCF/PEEK composites[J].Journal of Applied Polymer Science,2019,137(1):48749-48758.
[31] Bijwe J,Sharma S,Sharma M,et al.Exploration of potential of solid lubricants and short fibers in poly ether ketone(PEK) composites[J].Wear,2013,301(1-2):810-819.
[32] Lu H D,Ekinci,Ahin M S,et al.Enhancement of wear and friction characteristics of epoxy resin by multiwalled carbon nanotube and boron nitride nanoparticles[J].Tribology Transactions,2015,58(4):635-642.
[33] 彭旭东,马红玉,曾群峰,等.无机纳米微粒及聚四氟乙烯填充聚醚醚酮复合材料的摩擦学性能[J].摩擦学学报,2004,24(3):240-243.
[34] Zhang Ligang,Qi Huimin,Li Guitao,et al.Significantly enhanced wear resistance of PEEK by simply filling with modified graphitic carbon nitride[J].Materials and Design,2017,129:192-200.
[35] Inami Shigeru,Takayanagi Satoshi,Kubo Tomoo,et al.Effects of fine-dispersed PTFE on load carrying capacity of PEEK[J].Lubrication Science,2008,20(4):299-310.
[36] Dupuis Aurélie,Ho Thu Huong,Huong Thu,et al.Improving adhesion of powder coating on PEEK composite:Influence of atmospheric plasma parameters[J].Applied Surface Science:A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2015,357(Part A):1196-1204.
[37] Hamouti S,Pascale-Hamri A,Faure N,et al.Wear rate control of PEEK surfaces modified by femtosecond laser[J].Applied Surface Science,2015,357(1):1541-1551.
[38] Li J.Interfacial studies on the ozone and air-oxidation-modified carbon fiber reinforced PEEK composites[J].Surface And Interface Analysis,2010,41(4):310-315.
[39] Yapici Umut,Pan Lei,Xu Fei,et al.Effect of functional groups on interfacial adhesion properties of PEEK/carbon fiber composites[J].Applied Mechanics and Materials,2014,3342(1196):66-72.
[40] Liu L,Xiao L H,Zhang X P,et al.Improvement of the thermal conductivity and friction performance of poly(ether-ether ketone)/carbon fiber laminates by addition of graphene[J].RSC Advances,2015,5(71):57853-57859.