高分子材料3D打印技术已在医疗、航空航天、工业制造等领域崭露头角并创造了巨大的经济价值和社会效益。通过综述大量的文献,主要介绍了几种常见高分子3D打印技术的工作原理、优缺点以及应用状况,最后展望了未来高分子材料3D打印技术的发展趋势。
3D printing technology of polymer materials has emerged in medical,aerospace,industrial manufacturing and other fields,and has created huge economic value and social benefits.Based on a large number of literatures,the working principle,advantages and disadvantages and application status of several common polymer 3D printing technologies were mainly introduced.Finally,the development trend of 3D printing technology for polymer materials in the future was prospected.
[1] 毛宏理,顾忠伟.生物3D打印高分子材料发展现状与趋势[J].中国材料进展,2018,37(12):949-969,993.
[2] 刘厚才.光固化三维打印快速成形关键技术研究[D].武汉:华中科技大学,2009.
[3] Zou Y,Han Q,Weng X S,et al.The precision and reliability evaluation of 3-dimensional printed damaged bone and prosthesis models by stereo lithography appearance[J].Medicine,2018,97(6).e9797.
[4] 宗学文,王丹,肖涵,等.面成型光固化快速成形技术发展的关键要素的研究现状[J].制造技术与机床,2017(10):31-38.
[5] 孙忠良,洪军,卢秉恒,等.基于SLA的快速精铸技术研究现状[J].铸造技术,2008(6):814-817.
[6] Zhao Y Q,Yang J H,Ding X,et al.Polycaprolactone/polysaccharide functional composites for low-temperature fused deposition modelling[J].Bioactive Materials,2020,5(2):185-191.
[7] Wang B S,Ma B Y,Deng B Z,et al.Effects of fused deposition modeling process parameters on tensile,dynamic mechanical properties of 3D printed polylactic acid materials[J].Polymer Testing,2020,86:106483.
[8] Atheer A,Fabrizio F,Alvaro G,et al.3D printing:principles and pharmaceutical applications of selective laser sintering[J].International Journal of Pharmaceutics,2020,586:119594.
[9] 吴甲民,陈安南,刘梦月,等.激光选区烧结用陶瓷材料的制备及其成型技术[J].中国材料进展,2017,36(Z1):575-582.
[10] Sun S,Gan X,Wang Z,et al.Dynamic healable polyurethane for selective laser sintering[J].Additive Manufacturing,2020,33:101176.
[11] Bochnia J,Blasiak S.Stress relaxation and creep of a polymer-aluminum composite produced through selective laser sintering[J].Polymers,2020,12(4):830.
[12] Quan H,Zhang T,Xu H,et al.Photo-curing 3D printing technique and its challenges[J].Bioactive Materials,2020,5(1):110-115.
[13] 鲁中良,周江平,李涤尘等.基于光固化成形技术的复杂航空零件快速制造方法[J].航空制造技术,2015(Z1):97-100.
[14] 赵万华,李涤尘,柯映林.光固化快速成形中树脂涂层技术研究[J].中国机械工程,1999(12):3-5.
[15] Xu J,Gao Y,Huang H,et al.Diamond-structured hollow-tube lattice Ni materials via 3D printing[J].Science China Chemistry,2016,59(12):1632-1637.
[16] Abdulhussain N,Nawada S H,Sinéad Currivan,et al.Fabrication of polymer monoliths within the confines of non-transparent 3D-printed polymer housings[J].Journal of Chromatography A,2020,1623:461159.
[17] Padole M,Gharde S,Kandasubramanian B.Three-dimensional printing of molluscan shell inspired architectures via fused deposition modeling[J].Environmental Science and Pollution Research,2021,28:46356-46366.
[18] Yang T C,Yeh C H.Morphology and mechanical properties of 3D printed wood fiber/polylactic acid composite parts using fused deposition modeling (FDM):the effects of printing speed[J].Polymers,2020,12(6):1334.
[19] Galeja M,Wypiór K,Wachowicz J,et al.POM/EVA blends with future utility in fused deposition modeling[J].Materials,2020,13:2912.
[20] Wang M,Liu L,Ren Y,et al.Investigation of heated nozzle temperature in ABS specimens fabricated based on fiber Bragg grating during fused deposition modeling process[J].Integrated Ferroelectrics,2020,208(1):177-180.
[21] Afshar A,Mihut D.Enhancing durability of 3D printed polymer structures by metallization[J].Journal of Materials Science & Technology,2020,53:185-191.
[22] Son K H,Kim J H,Kim D E,et al.Analysis of correlation between contrast and component of polylatic acid composite for fused deposition modeling 3D printing[J] Journal of Nanoscience and Nanotechnology,2020,20(8):5107-5111.
[23] 文杰斌,陈礼,李中元,等.一种选择性激光烧结用尼龙粉末及其制备方法[P].CN 105754333A,2016-03-03.
[24] Nofal M,Al-Hallaj S,Pan Y.Experimental investigation of phase change materials fabricated using selective laser sintering additive manufacturing[J].Journal of Manufacturing Processes,2019,44:91-101.
[25] Stoia D I,Marsavina L,Linul E.Mode I fracture toughness of polyamide and alumide samples obtained by selective laser sintering additive process[J].Polymers,2020,12:640.
[26] Higa C F,Gradowski T,Elifio-Esposito S,et al.Influence of selective laser sintering process parameters on microstructure and physicochemical properties of poly(vinyl alcohol) for the production of scaffolds[J].Rapid Prototyping Journal,2020,26(6):1155-1164.
[27] Chiu K Y,Chen K K,Wang Y H,et al.Formability of Fe-doped bioglass scaffold via selective laser sintering[J].CeramicsInternational,2020,46(10):16510-16517.
[28] Qin T,Li X,Long H,et al.Bioactive tetracalcium phosphate scaffolds fabricated by selective laser sintering for bone regeneration applications[J].Materials,2020,13(10):2268.
[29] Sun P,Zhang L,Tao S.Preparation of hybrid chitosan membranes by selective laser sintering for adsorption and catalysis[J].Materials & Design,2019,173:107780.
[30] Zou Y,Li C H,Hu L,et al.Effects of short carbon fiber on the macro-properties,mechanical performance and microstructure of SiSiC composite fabricated by selective laser sintering[J].Ceramics International,2020,46(8):12102-12110.
[31] Xiong X,Zhu L,Wang G,et al.Microstructure and properties of n-type Bi2Te3-based thermoelectric material fabricated by selective laser sintering[J].Materials Research Express,2020,7(6):066504.
基金资助
广西研究生教育创新计划项目(GKYC202128)
PDF
