工程塑料是水润滑下摩擦副常用的一类材料,其摩擦磨损性能在很大程度上决定了摩擦副的使用性能。主要介绍水润滑的特点,分析水润滑摩擦副对材料的性能要求,综述水润滑下PTFE、PEEK、PA、PI等常用工程塑料的摩擦磨损性能研究情况,并对特定工况下摩擦副用工程塑料研究提出了建议。
Engineering plastic is a kind of common material for friction pairs' under water lubrication.Its friction and wear properties decided friction pairs' performance greatly.The features of water lubrication were introduced.The material performance demanded to friction pairs was analyzed.The research status of friction and wear properties of several common engineering plastics,such as PTFE,PEEK,PA,PI,etc.under water lubrication was reviewed in great detail.Then the research direction of engineering plastics in specific working condition was suggested.
[1] 王家序,陈战,秦大同.以水为润滑介质的摩擦副关键问题研究[J].润滑与密封,2001(2):34-36.
[2] 贾均红,陈建敏,周惠娣,等.炭纤维增强聚四氟乙烯复合材料在干摩擦和水润滑条件下的摩擦学行为对比研究[J].摩擦学学报,2004,24(1):16-20.
[3] Chen B B,Wang J Z,Yan F Y.Comparative investigation on the tribological behaviors of CF/PEEK composites under sea water lubrication[J].Tribology International,2012,52:170-177.
[4] Wang J Z,Yan F Y,Xue Q J.Tribological behavior of PTFE sliding against steel in sea water[J].Wear,2009,267(9):1634-1641.
[5] Xiong D S,GeS R.Friction and wear properties of UHMWPE/Al2O3 ceramic under different lubrication conditions[J].Wear,2001,250:242-245.
[6] 贾均红,陈建敏,周惠娣,等.炭纤维增强聚醚醚酮复合材料在水润滑下的摩擦学行为[J].高分子材料科学与工程,2005,21(2):208-212.
[7] 贾均红,周惠娣,高生强,等.聚酰亚胺复合材料的摩擦性能及其机理研究[J].摩擦学学报,2002,22(4):273-276.
[8] 王鹤泉,曹立礼,孙淑琴.尼龙1010在水润滑下的摩擦学特性与磨损机理[J].摩擦学学报,1997,17(2):152-159.
[9] 魏绪成,苏振国,徐佰明,等.玻璃纤维增强PA66复合材料与Al2O3陶瓷的摩擦磨损行为[J].复合材料学报,2012,29(5):47-52.
[10] 陈兆彬,李同生,杨玉良,等.聚酰胺/聚苯硫醚共混物摩擦学性能研究——(Ⅱ)水润滑[J].高分子材料科学与工程,2003,19(6):108-110,114.
[11] Zhang J G,Cai C L.Friction and wear properties of carbon fiber reinforced PEEK composites under water lubrication[J].Applied Mechanics Materials,2011,66-68:1051-1054.
[12] 张志远,聂松林,张振华,等.碳纤维增强聚酰亚胺在海水润滑下的摩擦学性能[J].润滑与密封,2016,41(11):78-82.
[13] Arash G,Klaus F,Andreas N,et al.Tribological behavior of carbon-filled PPS composites in water lubricated contacts[J].Wear,2015,328-329:456-463.
[14] Xiong D S.Friction and wear properties of UHMWPE composites reinforced with carbon fiber[J].Materials Letters,2005,59(2):175-179.
[15] Yang Q P,Huang P.Friction and wear property of glass fiber filled poIytetrafluoroethylene under sea water lubrication[J].Machine Tool and Hydraulics,2016,44(18):12-18.
[16] 李恩重,徐滨士,王海斗,等.玻璃纤维增强聚醚醚酮复合材料在水润滑下的摩擦学性能[J].材料工程,2014(3):77-82,89.
[17] 贾均红,陈建升,陈建敏,等.纤维增强聚酰亚胺复合材料的摩擦学行为[J].材料科学与工程学报,2008,26(6):832-836.
[18] 楚婷婷,李媛媛,孙小波,等.聚醚醚酮/聚四氟乙烯复合水润滑轴承材料性能研究[J].轴承,2015,(5):35-37.
[19] 朱鹏,王晓东,黄培,等.二硫化钼改性热塑性聚酰亚胺复合材料的摩擦磨损性能研究[J].摩擦学学报,2005,25(5):441-445.
[20] 王文东,张超,杜鸣杰,等.水/油润滑条件下PTFE复合材料的摩擦学性能[J].理化检验-物理分册,2016,52(10):717-721.
[21] Xu Y K,Guo Y X,Li G T,et al.Role of hydrolysable nanoparticles on tribological performance of PPS-steel sliding pair lubricated with sea water[J].Tribology International,2018,127:147-156.
[22] 厉相宝,倪晓梅,信苗苗,等.增强改性UHMWPE材料在水润滑条件下的磨损性能研究[J].塑料工业,2019,47(12):23-26,57.
[23] 钟莹洁,谢光有,孙兆松,等.水润滑条件下氧化锆颗粒及碳纤维共混增强聚醚醚酮复合材料的摩擦性能研究[J].材料研究学报,2010,24(6):625-630.
[24] 王家序,陈战,秦大同.水润滑塑料轴承的摩擦性能研究[J].机械工程材料,2002,26(11):36-38.
[25] 蒋光超,王晓雷.不锈钢表面粗糙度对PTFE摩擦学性能的影响[J].机械制造与自动化,2019,48(2):39-42.
[26] 贾政,麦云飞.水润滑下偶件表面粗糙度对碳纤维增强PEEK复合材料摩擦学性能的影响[J].塑料工业,2014,42(1):83-85,103.
[27] 梁瑛娜,高殿荣,毋少峰.海水润滑条件下316L不锈钢与仿生非光滑表面CF/PEEK的摩擦学性能[J].中国表面工程,2017,30(1):115-124.
[28] 万磊,刘丽斌,马越,等.碳化硅陶瓷与聚醚醚酮复合材料的摩擦磨损特性研究[J].轴承,2020,(5):22-26.
[29] 唐群国,姜静,朱玉泉.聚醚醚酮在水润滑下的摩擦磨损特性研究[J].华中科技大学学报(自然科学版),2005,33(9):53-55.
[30] 庞文超,倪自丰,赵永武,等.UHMWPE在空气、去离子水及海水中的摩擦特性[J].塑料,2014,43(5):64-66.
基金资助
国家重点研发计划(2018YFB1308702)
PDF
