Research progress on toughness of polymer matrix composite

Expand
  • 1. Xi'an Aerospace Composites Research Institute,Xi'an 710025;
    2. National and Local Union Engineering Research Center of High-Performance Carbon Fiber Manufacture and Application,Xi'an 710089

Received date: 2019-11-20

  Revised date: 2021-01-09

  Online published: 2021-05-10

Abstract

After decades of development,the research on domestic high-toughness polymer matrix composites has made great progress,but its application in engineering has just begun,and still has some problems.Based on the research status of polymer matrix composites at home and abroad,three types of toughening methods named matrix toughening,inter-layer toughening and Z-direction toughening respectively were introduced.Their mechanism,advantages and disadvantages were summarized as well.

Cite this article

Zhang Ran, Xie Huizhen, Li Ruizhen . Research progress on toughness of polymer matrix composite[J]. New Chemical Materials, 2021 , 49(3) : 39 -42 . DOI: 10.19817/j.cnki.issn 1006-3536.2021.03.010

References

[1] 杜善义.先进复合材料与航空航天[J].复合材料学报,2007,24(1):1-12.
[2] 杜善义,关志东.我国大型客机先进复合材料技术应对策略思考[J].复合材料学报,2008,25(1):1-10.
[3] Amar C,Garg,et al.Failure mechanisms in toughened epoxy resins—A review[J].Composites Science & Technology,1988,31(3):179-223.
[4] Kim J,Baillie C,Poh J,et al.Fracture toughness of CFRP with modified epoxy resin matrices[J].Composites Science and Technology,1992,43(3):283-297.
[5] Hsieh T H,Kinloch A J,Masania K,et al.The toughness of epoxy polymers and fibre composites modified with rubber microparticles and silica nanoparticles[J].Journal of Materials Science,2010,45(5):1193-1210.
[6] Giannakopoulos G,Masania K,Taylor A C.Toughening of epoxy using core-shell particles[J].Journal of Materials Science,2011,46(2):327-338.
[7] Tang L C,Zhang H,Sprenger S,et al.Fracture mechanisms of epoxy-based ternary composites filled with rigid-soft particles[J].Composites Science and Technology,2012,72(5):558-565.
[8] Pearson R A,Yee A F.Toughening mechanisms in thermoplastic-modified epoxies:1.Modification using poly(phenylene oxide)[J].Polymer,1993,34(17):3658-3670.
[9] 张志焜,崔作林.纳米技术与纳米材料[M].北京:国防工业出版社,2000:23-33.
[10] Liu H Y,Wang G T,Mai Y W,et al.On fracture toughness of nano-particle modified epoxy[J].Composites Part B Engineering,2011,42(8):2170-2175.
[11] Ratna D,Banthia A K.Rubber toughened epoxy[J].Macromolecular Research,2004,12(1):11-21.
[12] 卢明辉,阮居褀,李政,等.基于环氧树脂增强的泡沫金属/二氧化硅气凝胶复合吸声材料的制备方法:中国,201510810252[P].2016-11-20.
[13] Zhang H,Zhang Z,Friedrich K,et al.Property improvements of in situ epoxy nanocomposites with reduced interparticle distance at high nanosilica content[J].Acta Materialia,2006,54(7):1833-1842.
[14] Lim S H,Zeng K Y,He C B.Morphology,tensile and fracture characteristics of epoxy-alumina nanocomposites[J].Materials Science & Engineering A,2010,527(21-22):5670-5676.
[15] 董慧民,益小苏,安学锋,等.纤维增强热固性聚合物基复合材料层间增韧研究进展[J].复合材料学报,2014,31(2):273-285.
[16] Dejan S.Delamination properties of a vinyl-ester/glass fibre composite toughened by particulate-modified interlayers[D].Canberra:Department of Engineerng,Australian National University,2001:1-10.
[17] 燕瑛,成传贤.基于细观结构的三维机织复合材料弹性性能的分析[J].航空学报,1999,20(4):289-294.
[18] 姚佳伟,刘梦瑶,牛一凡.PEK-C膜层间增韧碳纤维/环氧树脂复合材料的力学性能[J].复合材料学报,2019,36(5):1083-1091.
[19] 朱孙欣.聚醚酰亚胺/热固性树脂体系的研究[D].苏州:苏州大学,2011.
[20] 高峰,矫桂琼,宁荣昌,等.层间颗粒增韧复合材料层压板的Ⅱ型层间断裂韧性[J].西北工业大学学报,2005,23(2):184-188.
[21] Bognitzki M,Czado W,Frese T.Nanostructured fibers via electrospinning[J].Advanced Materials,2001,13(1):70-72.
[22] 赵亚娣,张广鑫,傅宏俊,等.玄武岩纤维层合复合材料层间增韧方法研究[J].化学与黏合,2017,39(3):14-16.
[23] 郑楠.纳米相层间增韧碳纤维/环氧复合材料研究[D].哈尔滨:哈尔滨工业大学,2017.
[24] Mouritz A P,Leong K H,Herszberg I.A review of the effect of stitching on the in-plane mechanical properties of fibre-reinforced polymer composites[J].Composites Part A:Applied Science and Manufacturing,1997,28(12):979-991.
[25] Mouritz A P.Review of z-pinned composite laminates[J].Composites Part A:Applied Science and Manufacturing,2007,38(12):2383-2397.
[26] Majidi A P,Pipes R B,Reese E D.Friction and wear behavior of 2-D and 3-D fiber reinforced metal-matrix composites[J].Journal of Rnforced Plastics & Composites,1987,6(2):178-192.
[27] 冯波,王晓洁,惠雪梅.复合材料z-pin增强技术研究现状[J].玻璃钢/复合材料,2012(2):82-85.
[28] Partridge I,Cartie D.Delamination resistant laminates by Z-Fiber pinning:Part Ⅰ manufacture and fracture performance[J].Composites Part A,2005,36(1):55-64.
[29] 杨帆,郑锡涛,李亚智,等.Z-pin增强复合材料Ⅰ型断裂韧性数值分析[J].复合材料学报,2009(4):163-168.
[30] 黄恺.Z-pin增强碳纤维/树脂基复合材料黏结结构Ⅰ+Ⅱ型混合断裂韧性研究[D].西安:西安建筑科技大学,2016.
Options
Outlines

/