A new type of polythioether rubber with high crosslinking and low viscosity was prepared by thiol ene click chemical reaction.The number average molecular weight was 5611,the polydispersity index was only 2.9,and the glass transition temperature was -60℃.Compared with the polysulfide sealant,the polythioether sealant showed excellent compression resistance,and the compression creep variable was only 5.19%.the compression permanent deformation rate of the sealant increased with the increase of the sample height,and the greater the pressure,the easier the creep deformation was,but the overall increment was small.Compared with the mechanical properties after thermal cycling,the sealant had better high temperature resistance than polysulfide sealant.The low temperature stress relaxation test shown that the polythioether sealant had better low temperature compression resistance.
[1] Dsc Y N K.Polysulfide oligomer sealants:synthesis,properties and applications[J].Apple Academic Press,2015,9:89-95.
[2] Igene H A.Polysulfides:synthesis and analysis[D].Canada:Memorial University of Newfoundland,2013.
[3] 邢凤群.聚硫密封剂的性能特点及应用[J].粘接,2007,28(5):53-55.
[4] Khakimullin Y N,Minkin V S,Deberdeev T R,et al.Polysulfide oligomer sealants:synthesis,properties and application[J].Apple Academic Press,2015,8:289-194.
[5] Chen T,Zhang H X,Zhang Y J.Development of modified polysulfide sealant[J].Guangzhou Chemical Industry,2014,11:62-77.
[6] 刁根秀,刘鹏.国内外聚硫橡胶发展概况[J].辽宁化工,2015,44(2):48-51.
[7] 刘星北,王慧珊,章谏正,等.国内外航空聚硫密封剂产品概况[J].粘接,2015,36(3):83-87.
[8] Lu Y,Zhang J S,Chang P S,et al.Effect of filler on the compression set,compression stress-strain behavior,and mechanical properties of polysulfide sealants[J].Journal of Applied polymer Science,2011,120(4):2001-2007.
[9] Rezaeian L,Zahedi P,Rezaeian A,et al.Optimized formulation of an oxidative curing system for liquid polysulfide sealants used in fuel tanks by d-optimal design method[J].Journal of Applied Polymer Science,2011,120(5):2550-2562.
[10] Cai J,Serrano E,Virnelson B,et al.Polythioether sealants with enhanced thermal resistance[P].US9382448,2015-08-28.
[11] Rao C,Lin R.Maleimide-terminated sulfur-containing polymers,compositions thereof,and uses thereof[P].US9611359,2017-04-04.
[12] Lin R,Cui W.Hydraulic fluid and fuel resistant sealants[P].US20190010370,2019-01-10.