Research progress in silicone rubber as adiabatic coating material

Expand
  • Xi'an Modern Chemistry Research Institute,Xi'an 710065

Online published: 2020-12-07

Abstract

Silicone rubber is an important insulating layer of solid rocket motor and solid propellant cladding material,which has excellent high and low temperature resistance,heat insulation,solvent resistance and other properties,but weak mechanical properties and adhesive properties.The research progress in improving the ablative resistance,mechanics,bonding and aging properties of silicone rubber in solid rocket field was mainly introduced,and put forward the prospect of future research.

Cite this article

Liu Jianxia, Zhou Lisheng, Li Peng, Wu Shuxin, Chen Guohui, Yang Shishan, Fu Xiaolong . Research progress in silicone rubber as adiabatic coating material[J]. New Chemical Materials, 2020 , 48(11) : 1 -4 . DOI: 10.19817/j.cnki.issn 1006-3536.2020.11.001

References

[1] 陈国辉,常海.硅橡胶包覆层的研究进展[J].含能材料,2005,13(3):200-203.
[2] 张德雄.下一代绝热材料-聚二甲基硅氧烷[J].固体火箭技术,1993,26(2):45.
[3] 徐朝启,何国强,刘佩进,等.固体推进剂燃烧温度的双波长测试方法[J].固体火箭技术,2010,33(5):594-598.
[4] 栾磊.新型耐高温硅橡胶的制备和性能研究[D].天津:天津大学,2007.
[5] 彭文庆,谢择民.高热稳定性硅橡胶的研究[J].高分子通报,2000(1):1-8.
[6] 陆杰.耐高温硫化苯醚撑硅橡胶的制备及性能研究[D].武汉:湖北工业大学,2015.
[7] 石扬,黄艳华,薛磊,等.甲基苯基硅橡胶的高低温性能研究[J].有机硅材料,2016,30(2):93-96.
[8] 吴文明,焦保雷,甄恩龙,等.添加剂对硅橡胶耐高温性的影响[J].有机硅材料,2019,33(1):13-18.
[9] 张光武.耐烧蚀硅橡胶基复合材料的制备及性能研究[D].武汉:武汉理工大学,2017.
[10] Zhang G,Wang F,Huang Z,et al.Improved ablation resistance of silicone rubber composites by introducing montmorillonite and silicon carbide whisker[J].Materials,2016,9(9):723.
[11] Yue Y,Zhang H,Zhang Z,et al.Tensile properties of fumed silica filled polydimethylsiloxane networks[J].Composites Part A:Applied Science and Manufacturing,2013,54:20-27.
[12] Wang J C,Hao W L.Effect of organic modification on structure and properties of room-temperature vulcanized silicone rubber/montmorillonite nanocomposites[J].Journal of Applied Polymer Science,2013,129(4):1852-1860.
[13] 张艳,舒慧明,时艺娟.碳纤维对硅橡胶绝热层的性能效应[J].化工新型材料,2014,42(4):204-206.
[14] 李冬,杨士山,陈竚,等.中空微球对硅橡胶基绝热材料性能的影响[J].化工新型材料,2012,40(1):81-83.
[15] 任河,王磊,孙全吉,等.硅烷改性石墨烯纳米片增强硅橡胶的研制[J].有机硅材料,2019,33(4):249-254.
[16] 汪恒,夏茹,陈鹏,等.氟橡胶/甲基乙烯基硅橡胶共混胶的性能[J].合成橡胶工业,2019,42(6):440-444.
[17] 马静怡,孙彤彤,马和玲,等.硅橡胶/聚苯乙烯/石墨烯复合材料的制备及力学性能[J].山东化工,2019,48(21):1-3.
[18] 袁坤山,刘黎明,曹文瑞,等.高撕裂强度硅橡胶研究进展[J].合成橡胶工业,2019,42(4):332-336.
[19] 杨科,黄丽萍,王建华,等.相容剂改善硅橡胶/EPDM共混热防护材料性能的研究[J].上海航天,2017,34(5):99-104.
[20] 高希银,张志杰,张书豪,等.加成型硅橡胶高效增粘剂的应用研究[J].有机硅材料,2018,32(S1):20-25.
[21] Pan Z,Sun R,Zhu S,et al.The synthesis,characterization and properties of silicone adhesion promoters for addition-cure silicone rubber[J].Journal of Adhesion Science and Technology,2018,32(14):1517-1530.
[22] 张晓军,常新龙.固体火箭发动机粘接界面湿热老化实验[J].推进技术,2013,34(4):557-561.
[23] 蒋沙沙.硅橡胶加速老化及失效机理研究[D].哈尔滨:哈尔滨工业大学,2013.
[24] 郑有婧,黄正安,刘力荣.硅橡胶老化性能研究及寿命预测[J].塑料工业,2015,43(8):61-64.
Options
Outlines

/