Xiong Jiguang, Qin Xiaojun, Dong Chao, Zhao Zhiguo . Research progress and challenge of perovskite solar cells[J]. New Chemical Materials, 2020 , 48(8) : 1 -5 . DOI: 10.19817/j.cnki.issn 1006-3536.2020.08.001

[1] Habisreutinger S N,Leijtens T,Eperon G E,et al.Carbon nanotube/polymer composites as a highly stable hole collection layer in perovskite solar cells[J].Nano Lett,2014,14(10):5561-5568.
[2] Gholipour S,Saliba M.From exceptional properties to stability challenges of perovskite solar cells[J].Small,2018,14(46):1802385.
[3] Kojima A,Teshima K,Shirai Y,et al.Organometal halide perovskites as visible-light sensitizers for photovoltaic cells[J].J Am Chem Soc,2009,131(17):6050-6051.
[4] Xing G,Mathews N,Sun S,et al.Long-range balanced electron and hole-transport lengths in organic-inorganic CH₃NH₃PbI₃[J].Science,2013,342(6156):344-347.
[5] Po-Kai Kung,Li Ming-Hsien,Lin Peiying,et al.A review of inorganic hole transport materials for perovskite solar cells[J].Adv Mater Interfaces,2018,5(22):1800882.
[6] Anaya M,Lozano G,Calvo M E,et al.ABX₃ perovskites for tandem solar cells[J].Joule,2017,4:769-793.
[7] Stranks S D,Eperon G E,Grancini G,et al.Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber[J].Science,2013,342(6156):341-344.
[8] Protesescu L,Yakunin S,Nazarenko O,et al.Low-cost synthesis of highly luminescent colloidal lead halide perovskite nanocrystals by wet ball milling[J].ACS Appl Nano Mater,2018,1(3):1300-1308.
[9] Kim H S,Lee C R,Im J H,et al.Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%[J].Sci Rep,2012,2:591.
[10] Lee M M,Teuscher J,Miyasaka Tsutomu,et al.Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites[J].Science,2012,338(6107):643-647.
[11] Green M A,Ho-Baillie A,Snaith H J.The emergence of perovskite solar cells[J].Nat Photonics,2014,8:506-514.
[12] Yan J,Saunders B R.Third-generation solar cells:a review and comparison of polymer:fullerene,hybrid polymer and perovskite solar cells[J].RSC Adv,2014,4:43286-43314.
[13] 张继涛.基于溶剂配位—反溶剂萃取法的CH₃NH₃PbI₃钙钛矿薄膜质量调控及其光伏器件性能研究[D].太原:太原理工大学,2017.
[14] David Egger A,Eran Edri,David Cahen,et al.Perovskite solar cells:do we know what we do not know？[J].J Phys Chem Lett,2015,6:279-282.
[15] National Renewable Energy Laboratory.Research cell record efficiency chart and explanatory notes[EB/OL].[2019-01-02].https://www.nrel.gov/pv/assets/pdfs/pv-efciency-chart.20181221.
[16] Wang G,Melkonyan F S,Facchetti A,et al.All-polymer solar cells:recent progress,challenges,and prospects[J].Angewandte Chemie International Edition,2019,58(13):4129-4142.
[17] Yang H J,Zhang Yi,Zhou Y Y,et al.Building bridges between halide perovskite nanocrystals and thin-film solar cells[J].Sustainable Energy Fuels,2018,2:2381-2397.
[18] Dong X,Fang X,Lv M,et al.Improvement of the humidity stability of organic-inorganic perovskite solar cells using ultrathin Al₂O₃ layers prepared by atomic layer deposition[J].Journal of Materials Chemistry A,2015,3:5360-5367.
[19] Etgar L,Gao P,Xue Z,et al.Mesoscopic CH₃NH₃PbI₃/TiO₂ heterojunction solar cells[J].J Am Chem Soc,2012,134:17396-17399.
[20] Ball J M,Lee M M,Hey A,et al.Low-temperature processed meso-superstructured to thin-film perovskite solar cells[J].Energy Environ Sci,2013,6:1739-1743.
[21] Jeon N J,Noh J H,Kim Y C,et al.Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells[J].Nat Mater,2014,13:897-903.
[22] Yang W S,Noh J H,Jeon N J,et al.High-performance photovoltaic perovskite layers fabricated through intramolecular exchange[J].Science,2015,348(6240):1234-1237.
[23] Jeon N J,Noh J H,Yang W S,et al.Compositional engineering of perovskite materials for high-performance solar cells[J].Nature,2015,517:476-480.
[24] Saliba M,Matsui T,Domanski K,et al.Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance[J].Science,2016,354(6309):206-209.
[25] Yang W S,Park B W,Jung E H,et al.Iodide management in formamidinium-lead-halide-based perovskite layers for efficient solar cells[J].Science,2017,356(6345):1376-1379.
[26] Tan H,Jain A,Voznyy O,et al.Efficient and stable solution-processed planar perovskite solar cells via contact passivation[J].Science,2017,355:722-726.
[27] Shin S S,Yeom E J,Yang W S,et al.Colloidally prepared La-doped BaSnO₃ electrodes for efficient,photostable perovskite solar cells[J].Science,2017,356:167-171.
[28] Lin Yun,Bai Yang,Fang Yanjun,et al.Enhanced thermal stability in perovskite solar cells by assembling 2D/3D stacking structures[J].J Phys Chem Lett,2018,9:654-658.
[29] Yuan Y,Huang J.Ion migration in organometal trihalide perovskite and its impact on photovoltaic efficiency and stability[J].Acc Chem Res,2016,49(2):286-293.
[30] Kato Y,Ono L K,Lee M V,et al.Silver iodide formation in methyl ammonium lead iodide perovskite solar cells with silver top electrodes[J].Adv Mater Interfaces,2015,2:1500195.
[31] Back H,Kim G,Kim J,et al.Achieving long-term stable perovskite solar cells via ion neutralization[J].Energy Environ Sci,2016,9:1258-1263.
[32] Domanski K,Correa-Baena J P,Mine N,et al.Not all that glitters is gold:metal-migration-induced degradation in perovskite solar cells[J].ACS Nano,2016,10:6306-6314.
[33] Arora N,Dar M I,Hinderhofer A,et al.Perovskite solar cells with CuSCN hole extraction layers yield stabilized efficiencies greater than 20%[J].Science,2017,358:768-771.
[34] Cheacharoen R,Rolston N,Harwood D,et al.Design and understanding of encapsulated perovskite solar cells to withstand temperature cycling[J].Energy Environ Sci,2018,11:144-150.
[35] Bush K A,Palmstrom A F,Yu Z J,et al.23.6%-efficient monolithic perovskite/silicon tandem solar cells with improved stability[J].Nat Energy,2017,2:17009.
[36] Zhou H P,Chen Q,Li G,et al.Interface engineering of highly efficient perovskite solar cells[J].Science,2014,345(6196):542-546.
[37] Bass K K,McAnally R E,Zhou S,et al.Influence of moisture on the preparation,crystal structure,and photophysical properties of organohalide perovskites[J].Chem Commun,2014,50:15819-15822.
[38] Li W,Fan J,Mai Y,et al.Aquointermediate assisted highly orientated perovskite thin films toward thermally stable and efficient solar cells[J].Adv Energy Mater,2017,7(2):1601433.
[39] Domanski K,Alharbi E A,Hagfeldt A,et al.Systematic investigation of the impact of operation conditionson the degradation behaviour of perovskite solar cells[J].Nat Energy,2018,3:61-67.
[40] You Jingbi,Meng Lei,Song Tze-Bin,et al.Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers[J].Nat Nanotechnol,2016,11:75-81.
[41] 余荣斌.基于性能退化的光伏组件服役可靠性评估方法研究[D].广州:华南理工大学,2016.
[42] Pilar Lopez Varo,Jimnez-Tejada J A,Sandheep Ravishankar.Device physics of hybrid perovskite solar cells:theory and experiment[J].Adv Energy Mater,2018,8(14):1702772.
[43] Bhat A,Dhamaniya B,Chhillar P,et al.Analysing the prospects of perovskite solar cells within the purview of recent scientific advancements[J].Crystals,2018,8(6):242.
[44] 李鹞.中国晶体硅太阳能电池板的生命周期评价[D].上海:上海交通大学.2015.
[45] Wang A,Mujahid M,Duan Y,et al.A review of perovskites solar cell stability[J].Adv Funct Mater,2019,29(47):1808843.