Preparation and modification of Na-ionic layered oxide material for Na-ionic battery

Expand
  • College of Petrochemical Technology,Lanzhou University of Technology,Gansu Engineering Laboratory of Cathode Material for Lithium-ion Battery,Lanzhou 730050

Received date: 2019-06-04

  Revised date: 2020-06-02

  Online published: 2020-10-20

Abstract

The Na-ionic layered oxide material has become a research hotspot in recent years due to its low cost,wide resource distribution,high working voltage,high specific capacity and good safety.The main preparation methods of Na-ionic layered oxide cathode materials,the reasons for capacity decay and the modification methods were reviewed.The advantages and disadvantages of common preparation methods and possible causes of capacity decay were analyzed.And the future application and development direction of the cathode materials were prospected as well.

Cite this article

Wang Shimin, Li Chunlei, Ai Ling, Wang Shengxian, Li Shiyou . Preparation and modification of Na-ionic layered oxide material for Na-ionic battery[J]. New Chemical Materials, 2020 , 48(9) : 251 -255 . DOI: 10.19817/j.cnki.issn 1006-3536.2020.09.055

References

[1] 邓旭,姚亚明.能源成因分类及非常规能源发展研究[J].创新科技,2017,212(10):28-32.
[2] Chen M Z,Liu Q N,Wang S W,et al.High-abundance and low-cost metal-based cathode materials for sodium-ion batteries:problems,progress,and key technologies[J].Advanced Energy Materials,2019,36(9):1-41.
[3] Wang P F,You Y,Yin Y X,et al.Layered oxide cathodes for sodium-ion batteries:phase transition,air stability,and performance[J].Advanced Energy Materials,2017,8(8):1-23.
[4] 栾政明,佘延双.国际锂矿资源勘探开发的机会与投资策略[J].国土资源情报,2018(4):41-45.
[5] 曹余良,方永进,陈重学,等.钠离子电池正极材料研究进展[J].物理化学学报,2017,33(1):211-241.
[6] Hwang J Y,Myung S T,Sun Y.Sodium-ion batteries:present and future[J].Chemical Society Reviews,2017,46(12):3485-3856.
[7] 史文静,燕永旺,徐守冬,等.钠离子电池正极材料Na0.44MnO2的研究进展[J].化工进展,2017,36(9):3343-3352.
[8] 潘都,戚兴国,刘丽露,等.钠离子电池正负极材料研究新进展[J].硅酸盐学报,2018,46(4):479-498.
[9] Delmas C,Fouassier C,Hagenmulle P.Stuctural caclassification and properties of the layered oxides[J].Physica B&C,1980,99(14):81-85.
[10] Qi X,Liu L,Song N,et al.Design and comparative study of O3/P2 hybrid structures for room temperature sodium-ion batteries[J].ACS Applied Materials & Interfaces,2017,9(46):40215-40223.
[11] Cao M H,Shadike Z,Zhou Y N,et al.Sodium-deficient O3-type Na0.83Cr1/3Fe1/3Mn1/6Ti1/6O2 as a new cathode material for Na-ion batteries[J].Electrochimical Acta,2018,326(18):7-19.
[12] Bianchini M,Gonzalo E,Drewett N E,et al.Layered P2-O3 sodium-ion cathodes derived from earth abundant elements[J].Journal of Materials Chemistry A,2018,6(8):3552-3559.
[13] Li Z Y,Wang H B,Chen D F,et al.Improving the performance of layered oxide cathode materials with football-like hierarchical structure for Na-ion batteries by incorporating Mg2+ into vacancies in Na-ion layers[J].Chemsuschem,2018,11(7):1223-1231.
[14] Sun H H,Wang J Y H,Yoon C S,et al.Capacity degradation mechanism and cycling stability enhancement of AlF3 coated nano-rod gradient Na(Ni0.65Co0.08Mn0.27)O2 cathode for sodium-ion batteries[J].ACS Nano,2018,8(26):1-27.
[15] Chu S,Wei S,Chen Y,et al.Optimal synthesis and new understanding of P2-type Na2/3Mn1/2Fe1/4Co1/4O2 as an advanced cathode material in sodium-ion batteries with improved cycle stability[J].Ceramics International,2018,44(5):5184-5192.
[16] Chen T,Liu W,Gao H,et al.A P2-type Na0.44Mn0.6Ni0.3Cu0.1O2 cathode material with high energy density for sodium-ion batteries[J].Journal of Materials Chemistry A,2018,6(26):12582-12588.
[17] Roger M,Morris D J P,Tennant D A,et al.Patterning of sodium ions and the control of electrons in sodium cobaltate[J].Nature,2007,445(8):631-634.
[18] Ying S M,Yoyo H,Gerbrand C.An investigation of the sodium patterning in NaxCoO2(0.5≤x≤1) by density functional theory methods[J].Chemical Physics,2008,128(10):104708-104715.
[19] Wang K,Yan P F,Sui M L.Phase transition induced cracking plaguing layered cathode for sodium-ion battery[J].Nano Energy,2018,307(18):8-15.
[20] Xu S,Wu J,Hu E,et al.Suppressing the voltage decay of low-cost P2-type iron based cathode materials for sodium-ion batteries[J].Journal of Materials Chemistry A,2018,6(42):20795-20803.
[21] Deng J,Luo W,Lu X,et al.High energy density sodium-ion battery with industrially feasible and air-stable O3-type layered oxide cathode[J].Advanced Energy Materials,2018,8(5):1601-1609.
[22] Choi J U,Park Y J,Jo J H,et al.Unraveling the role of earth-abundant Fe in the suppression of Jahn-Teller distortion of P2-type Na2/3MnO2:experimental and theoretical studies[J].ACS Applied Materials & Interfaces,2018,10(48):40978-40984.
[23] You Y,Dolocan A,Li W,et al.Understanding the air-exposure degradation chemistry at a nanoscale of layered oxide cathodes for sodium-ion batteries[J].Nano Letters,2018,19(1):182-188.
[24] Jo C,Jo J,Yashiro H,et al.Bioinspired surface layer for the cathode material of high-energy-density sodium-ion batteries[J].Advanced Energy Materials,2018,8(13):42-54.
[25] 苑丁丁.层状过渡金属氧化物的储钠反应性质研究[D].武汉:武汉大学,2015.
[26] Zhang K,Kim D,Hu Z,et al.Manganese based layered oxides with modulated electronic and thermodynamic properties for sodium ion batteries[J].Nature Communications,2019,10(1):3-15.
[27] Chu S,Chen Y,Wang J,et al.A cobalt and nickel co-modified layered P2-Na2/3Mn1/2Fe1/2O2 with excellent cycle stability for high-energy density sodium-ion batteries[J].Journal of Alloys and Compounds,2019,775(15):383-392.
[28] Dang R,Li Q,Chen M,et al.CuO-coated and Cu2+-doped Co-modified P2-type Na2/3(Ni1/3Mn2/3)O2 for sodium-ion batteries[J].Physical Chemistry Chemical Physics,2019,21(1):314-321.
[29] 戚兴国.钠离子电池层状氧化物材料研究及其产业化探索[D].北京:科学院大学物理化学研究所,2018.
Options
Outlines

/