Acrylonitrile-butadiene-styrene terpolymer grafted maleic anhydride (ABS-g-MAH) as compatibilizer,poly (vinyl chloride)/polyamide 6 (PVC/PA6) molten blends were prepared by blending PVC and homemade PA6 with low melting point.The effects of PA6 on the morphology,friction and wear,and mechanical properties were investigated.The results of scanning electron microscopy (SEM) shown that when PA6 content was 10%,the particle size was the smallest in PVC resin.The results of frictional and mechanical tests shown when the content of PA6 was 10%,the friction,abrasion and mechanical properties of compound were optimum.
[1] 黄锐,张忠义,邓毅.半硬质PVC超细CaCO3体系性能的初步研究[J].中国塑料,1987,1(1):15-23.
[2] 张传贤.PVC/NBR复合材料的生产技术及应用[J].合成树脂及塑料,2012,29(4):80-84.
[3] Gawade A R,Lodha A V,Joshi P S.PVC/ABS blends:thermal and morphological studies[J].Journal of Macromolecular Science,2007,47(1):201-210.
[4] Du Y,Gao J,Yang J,et al.Dynamic rheological behavior and mechanical properties of PVC/CPE/MAP-POSS nanocomposites[J].Journal of Applied Polymer Science,2013,129(1)174-180.
[5] El-Shekeil Y A,Sapuan S M,Jawaid M,et al.Influence of fiber content on mechanical,morphological and thermal properties of kenaf fibers reinforced poly (vinyl chloride)/thermoplastic polyurethane poly-blend composites[J].Materials & Design,2014,58(6):130-135.
[6] Hofmann G H.Proceeding of 54th technical conference of society of plastics engineers[C].Connecticut,USA:Society of Plastics Engineers,1996.
[7] Hofmann G H.An unusual match nylon & PVC can go together[J].Plastics Technology,1998,44(6):55-57.
[8] Sherman L M.Flexible engineering alloys marry nylon with vinyl[J].Plastics Technology,1997,43(11):17-18.
[9] 王彩虹,周秉正,何敏,等.接枝率对PVC/PA6-g-SMA共混物结果与性能的影响[J].中国塑料,2009,23(3):37-40.
[10] 于杰,钱志军,罗筑,等.相容剂对PVC/PA6体系形态结构的影响[J].聚氯乙烯,2009,37(1):30-33.
[11] 张博,房轶群,宋永明,等.尼龙及增容剂对聚氯乙烯木塑复合材料性能的影响[J].东北农业大学学报,2017,45(6):74-78.