Li Jingjing, Wang Ruixiang, Xing Meibo . Failure mechanisms and optimization strategies of solar selective absorption coatings[J]. New Chemical Materials, 2024 , 52(7) : 51 -57 . DOI: 10.19817/j.cnki.issn1006-3536.2024.07.046

[1] Friedlingstein P,O'Sullivan M,Jones M W,et al.Global carbon budget 2022[J].Earth System Science Data,2022,14(11):4811-4900.
[2] Cheng P,Wang D,Schaaf P.A review on photothermal conversion of solar energy with nanomaterials and nanostructures:from fundamentals to applications[J].Advanced Sustainable Systems,2022,6(9):2200115.
[3] Izam N S M N,Itam Z,Sing W L,et al.Sustainable development perspectives of solar energy technologies with focus on solar photovoltaic—a review[J].Energies,2022,15(8):2790.
[4] Xu D,Gu X,Dai Y.Concentrating solar assisted biomass-to-fuel conversion through gasification:a review[J].Frontiers in Energy Research,2023,10:1029477.
[5] Ajbar W,Parrales A,Huicochea A,et al.Different ways to improve parabolic trough solar collectors' performance over the last four decades and their applications:a comprehensive review[J].Renewable and Sustainable Energy Reviews,2022,156:111947.
[6] Ajbar W,Hernández J A,Parrales A,et al.Thermal efficiency improvement of parabolic trough solar collector using different kinds of hybrid nanofluids[J].Case Studies in Thermal Engineering,2023,42:102759.
[7] Asaad Yasseen A R,Istvan S,Istvan F.Selective absorber coatings and technological advancements in performance enhancement for parabolic trough solar collector[J].Journal of Thermal Science,2022,31(6):1990-2008.
[8] 王龙飞,安丽琼,孙凯,等.碳化物超高温陶瓷太阳能选择性吸收涂层的研究进展[J].材料导报,2021,35(23):23033-23039.
[9] Tabor H.Solar energy research:program in the new desert research institute in Beersheba[J].Solar Energy,1958,2(1):3-6.
[10] Senthil R,Kumar K K,Rajendra K R,et al.Enhancement of absorptance of absorber surfaces of a flat plate solar collector using black coating with graphene[J].Energy Sources Part a-Recovery Utilization and Environmental Effects,2021,43(20):2595-2608.
[11] Suriwong T.Influence of Ni-Al coating thickness on spectral selectivity and thermal performance of parabolic trough collector[J].Materials for Renewable and Sustainable Energy,2018.
[12] Ambrosini A,Lambert T N,Boubault A,et al.Thermal stability of oxide-based solar selective coatings for CSP central receivers[C].San Diego,California,USA:PowerEnergy,2015,2015.
[13] 刘嘉成,胡绪灿,陈昆,等.CoCuMnO_x太阳能选择性吸收涂层的制备与性能研究[J].化工新型材料,2021,49(1):126-130.
[14] Kim J U,Lee S,Kang S J,et al.Materials and design of nanostructured broadband light absorbers for advanced light-to-heat conversion[J].Nanoscale,2018,10(46):21555-21574.
[15] Liao Q,Zhang P,Yao H,et al.Reduced graphene oxide-based spectrally selective absorber with an extremely low thermal emittance and high solar absorptance[J].Advanced Science,2020,7(8):1903125.
[16] Abdelkader T K,Zhang Y,Gaballah E S,et al.Energy and exergy analysis of a flat-plate solar air heater co a high-temperature stable spectrally-selective solar absorber based on cermet of titanium nitride in SiO₂ deposited on lanthanum aluminate ated with carbon nanotubes and cupric oxide nanoparticles embedded in black paint[J].Journal of Cleaner Production,2020,250:119501.
[17] 曹宁宁,卢松涛,姚锐,等.太阳光谱选择性吸收涂层[J].化学进展,2019,31(4):597-612.
[18] Ren J,Liang D,Liu H,et al.High-temperature thermal stable solar selective absorbing coating based on the dielectric-metal-dielectric structure[J].Materials Today Physics,2023,34:101092.
[19] Shi K,Liu H,Wang L,et al.Theoretical design of a multilayer based spectrally selective solar absorber applied under ambient conditions[J].Frontiers in Energy Research,2021,9:795261.
[20] Bello M,Shanmugan S.Achievements in mid and high-temperature selective absorber coatings by physical vapor deposition (PVD) for solar thermal application-a review[J].Journal of Alloys and Compounds,2020,839:155510.
[21] Ding Z.Spectrally selective absorption coatings and their applications:a review[J].Sustainable Energy Technologies and Assessments,2022:16.
[22] 邵豪,曾鲜,李擎煜,等.Co-Cr₃C₂-WC/Al₂O₃太阳能选择性吸收涂层制备与性能研究[J].表面技术,2020,49(6):138-145.
[23] Ning Y,Wang W,Wang L,et al.Optical simulation and preparation of novel Mo/ZrSiN/ZrSiON/SiO₂ solar selective absorbing coating[J].Solar Energy Materials and Solar Cells,Amsterdam,2017,167:178-183.
[24] 王晓波,王墉哲,程旭东,等.大气条件下AlCrON基光谱选择性吸收涂层的热稳定性[J].金属学报,2021,57(3):327-339.
[25] Cuomo J J,Ziegler J F,Woodall J M.A new concept for solar energy thermal conversion[J].Applied Physics Letters,1975,26(10):557-559.
[26] Yu H,Li J,Zhang Q,et al.Thermal stability of chromium-iron oxidation mixture cermet-based solar selective absorbing coatings[J].Molecules,2020,25(5):1178.
[27] Wei H,Xu Q,Chen D,et al.Lowered infrared emittance and enhanced thermal stability of solar selective absorption properties of anodic aluminum oxide photonic crystal coatings[J].Solar Energy,2022,241:592-600.
[28] Zäll E,Nordenström A,Järn M,et al.Environmentally sustainable electroplating of selective cobalt-chromium coating on stainless steel for efficient solar collectors[J].Solar Energy Materials and Solar Cells,2022,245:111821.
[29] Meng J P,Zhou L.Enhanced thermal stability of ZrAlSiN cermet-based solar selective absorbing coatings via adding silicon element[J].Materials Today Physics,2019,9:100131.
[30] Ning Y,Wang C,Wang W,et al.Improvement of thermal stability of ZrSiON based solar selective absorbing coating[J].Journal of Materiomics,2020,6(4):760-767.
[31] Wen H,Wang W,Wang W,et al.Enhanced spectral absorption of bilayer WO_x/SiO₂ solar selective absorber coatings via low vacuum pre-annealing[J].Solar Energy Materials and Solar Cells,2019,202:110152.
[32] Gao X H,Guo H X,Zhou T H,et al.Optical properties and failure analysis of ZrC-ZrO_x ceramic based spectrally selective solar absorbers deposited at a high substrate temperature[J].Solar Energy Materials and Solar Cells,2018,176:93-99.
[33] Zheng L,Zhou F,Zhou Z,et al.Angular solar absorptance and thermal stability of Mo-SiO₂ double cermet solar selective absorber coating[J].Solar Energy,2015,115:3410346.
[34] Du Xinkang,Cong W,Wang Tianmin,et al.Microstructure and spectral selectivity of Mo-Al₂O₃ solar selective absorbing coatings after annealing[J].Thin Solid Films,2008,516(12):3971-3977.
[35] Sani E,Mercatelli L,Meucci M,et al.Compositional dependence of optical properties of zirconium,hafnium and tantalum carbides for solar absorber applications[J].Solar Energy,2016,131:199-207.
[36] Kondaiah P,Niranjan K,John S,et al.Tantalum carbide based spectrally selective coatings for solar thermal absorber applications[J].Solar Energy Materials and Solar Cells,2019,198:26-34.
[37] Li Y,Lin C,Wu Z,et al.Solution-processed all-ceramic plasmonic metamaterials for efficient solar-thermal conversion over 100～727℃[J].Advanced Materials,2021,33(1):2005074.
[38] Wang X,Gao J,Hu H,et al.High-temperature tolerance in WTi-Al₂O₃ cermet-based solar selective absorbing coatings with low thermal emissivity[J].Nano Energy,2017,37:232-241.
[39] Wang X,Kang Y,Yuan X,et al.A feasible and promising strategy for improving the solar selectivity and thermal stability of cermet-based photothermal conversion coatings[J].Materials,2022,15(19):6847.
[40] Liu Y,Liu H D,Pelenovich V,et al.Structure and thermal stability of a novel nanocomposite solar selective absorber coating[J].Vacuum,2021,194:110578.
[41] Gao X H,Qiu X L,Shen Y Q,et al.A novel TiC-ZrB₂/ZrB₂/Al₂O₃ multilayer high temperature solar selective absorbing coating:microstructure,optical properties and failure mechanism[J].Solar Energy Materials and Solar Cells,2019,203:110187.
[42] Sun B,Wang L,Sun Y,et al.Enhanced thermal stability of Mo film with low infrared emissivity by a TiN barrier layer[J].Applied Surface Science,2022,571:151368.
[43] Ling X,Wang R,Wang W,et al.Microstructure and optical properties of W/W-W_xN/WO_x multilayer metal-dielectric solar selective absorbing coating[J].Surface and Interface Analysis,2022,54(11):1121-1129.
[44] Taha F,El Mahallawy N,Shoeib M.A study of sol gel process parameters on CoCuMnO_x selective coating characteristics[J].Materials Research Express,Bristol,2020,7(2):026410.
[45] Pelenovich V,Zeng X,Liu Y,et al.AlCrO protected textured stainless-steel surface for high temperature solar selective absorber applications[J].Surface and Coatings Technology,2022,436:128282.
[46] Cao F,Tang L,Li Y,et al.A high-temperature stable spectrally-selective solar absorber based on cermet of titanium nitride in SiO₂ deposited on lanthanum aluminate[J].Solar Energy Materials and Solar Cells,2017,160:12-17.
[47] Rodríguez-Palomo A,Céspedes E,Hernández-Pinilla D,et al.High-temperature air-stable solar selective coating based on MoSi₂-Si₃N₄ composite[J].Solar Energy Materials and Solar Cells,2018,174:50-55.