Preparation and electrochemical properties of Al-Zr co-doped lithium cobaltate

Expand
  • College of Textile and Clothing,Xinjiang University,Urumqi 830017

Received date: 2022-06-26

  Revised date: 2023-06-03

  Online published: 2023-10-27

Abstract

Al-Zr co-doped lithium cobaltate cathode material was prepared by high temperature solid phase method.The cyclic stability of lithium cobaltate cathode material at high potential and the effects of final firing temperature and final firing holding time on the morphology and electrochemical properties of the material were investigated.The morphology and electrochemical properties of the materials were characterized by scanning electron microscopy,constant current charge-discharge and AC impedance techniques.The results showed that the material prepared under the condition of 1000℃ final firing temperature and 16h holding time exhibited uniform particle dispersion with particle sizes ranging from 1 to 5μm.The specific capacity of the first coil was 187.4mAh/g at 0.1C current density,and the capacity retention rate was 91.3% after 50 cycles,with stable circulation performance and high capacity at high potential.

Cite this article

Zhang Jianfeng, Liu Wei, Liu Hang, Xu Zhenkai, Lin Duojia, Xia Xin . Preparation and electrochemical properties of Al-Zr co-doped lithium cobaltate[J]. New Chemical Materials, 2023 , 51(10) : 173 -178 . DOI: 10.19817/j.cnki.issn1006-3536.2023.10.017

References

[1] Wang Jinming,Ge Bingcheng,Li Hui,et al.Challenges and progresses of lithium-metal batteries[J].Chemical Engineering Journal,2021,420:1.
[2] Zhao Yanyan,Pohl Oliver,Bhatt Anand I,et al.A review on battery market trends,second-life reuse,and recycling[J].Sustainable Chemistry,2021,2(1):167-205.
[3] Wang Yuxing,Liu Bo,Li Qiuyan,et al.Lithium and lithium ion batteries for applications in microelectronic devices:a review[J].Journal of Power Sources,2015,286:330-345.
[4] Kumar A,Jadon J K S,AIi H.An overview of lithium ion battery and its composition[J].ACADEMICIA:An International Multidisciplinary Research Journal,2021,11(10):165-172.
[5] Zhang Jianhua,Jin Yuhong,Liu Jingbing,et al.Recent advances in understanding and relieving capacity decay of lithium ion batteries with layered ternary cathodes[J].Sustainable Energy & Fuels,2021,5(20):5114-5138.
[6] Li Jianyuan,Lin Cong,Weng Mouyi,et al.Structural origin of the high-voltage instability of lithium cobalt oxide[J].Nature Nanotechnology,2021,16(5):599-605.
[7] Wen L,Wang L,Hu S.Effect of carbon-coating on internal resistance and performance of lithium iron phosphate batteries[J].Journal of the Electrochemical Society,2022,169(5):50536.
[8] Umair M,Nazir G,Murtaza G,et al.Synthesis and characterization of Al and Zr-duAl-doped lithium cobalt oxide cathode for Li-ion batteries using a facile hydrothermal approach[J].Colloids and Surfaces A:Physicochemical and Engineering Aspects,2022,641:128493.
[9] Huang Y,He W,Zhang P,et al.Nitrogen-doped MnO2 nanorods as cathodes for high-energy Zn-MnO2 batteries[J].Functional Materials Letters,2018,11(6):1840006.
[10] Chen S,Liao Z,Kang J,et al.Enhanced cyclic performance of O2-type Mn-based layered oxide via Al doping for lithium-ion battery[J].Journal of Alloys and Compounds,2022,910:164793.
[11] 方苏捷,陈安勇,高洪涛,等.Al、Mn共掺杂高镍正极材料电化学性能研究[J].电源技术,2022,46(1):11-14.
[12] Liang Qimei,Wang Zilin,Bai Wei,et al.Stimulative formation of truncated octahedral LiMn2O4 by Cr and Al co-doping for use in durable cycling Li-ion batteries[J].Dalton Transactions,2021,50(46):17052-17061.
[13] Kim S H,Kim C S.Improving the rate performance of LiCoO2 by Zr doping[J].Journal of Electroceramics,2009,23(2):254-257.
[14] Shang S,Jiang F.Superior Li-storage behaviors of single crystal for Zr-substituted LiNi0.815Co0.15Al0.035O2 as cathode material for Li-ion battery[J].Ionics,2022,28(4):1523-1535.
[15] Li L,Han E,Zhu L,et al.Effect of Zr doping and Al-Zr co-doping on LiNi0.5Co0.25Mn0.25O2 for lithium-ion batteries[J].Solid State Ionics,2020,346:115220.
[16] Umair M,Nazir G,Murtaza G,et al.Synthesis and characte-rization of Al and Zr-duAl-doped lithium cobalt oxide cathode for Li-ion batteries using a facile hydrothermal approach[J].Colloids and Surfaces A:Physicochemical and Engineering Aspects,2022,641:128493.
[17] Tahir Sattar,Seung-Hwan Lee,Seong-Ju Sim,et al.Effect of Mg-doping on the electrochemical performance of LiNi0.84Co0.11Mn0.05O2 cathode for lithium ion batteries[J].International Journal of Hydrogen Energy,2020,45(38):19567-19576.
[18] Wang Xiao,WangXinyang,Lu Yingying.Realizing high vol-tage lithium cobalt oxide in lithium-ion batteries[J].Industrial & Engineering Chemistry Research,2019,58(24):10119-10139.
[19] Aghamohammadi H,Eslami-Farsani R.Effects of calcination parameters on the purity,morphology,and electrochemical properties of the synthesized TiNb2O7 by the solvothermal method as anode materials for Li-ion batteries[J].Journal of Electroanalytical Chemistry,2022,917:116394.
[20] Ramakrishnan Narayanrao,Joglekar M M,Sudhakar Inguva.A phenomenological degradation model for cyclic aging of lithium ion cell materials[J].Journal of the Electrochemical Society,2012,160(1):125.
Options
Outlines

/