Preparation of and property polylactic acid/carbon nanotube nanocomposite by solid phase mechanochemical reactor

Expand
  • State Key Laboratory of Polymer Materials Engineering of Sichuan University,Chengdu 610065

Received date: 2020-08-03

  Revised date: 2021-09-13

  Online published: 2021-12-31

Abstract

As a degradable material,polylactic acid (PLA) has received widespread attention though。but its mechanical properties cannot fully meet the needs of practical applications.Incorporation of nanomaterials to promote crystallinity paves an important way to achieve high performance of polymer materials,and the uniform dispersion and good compatibility of nanofillers are the key factors.The solid phase mechanochemical method was used to realize the in-situ grafting and uniform dispersion of carbon nanotubes (CNTs) in the PLA matrix,which successfully improved the crystallinity of the PLA/CNTs composite material.A new path to achieve high performance polylactic acid-based composite materials was provided.

Cite this article

Zhang Chun, Fu Hao, Yang Changhua, Nie Min, Li Yijun . Preparation of and property polylactic acid/carbon nanotube nanocomposite by solid phase mechanochemical reactor[J]. New Chemical Materials, 2021 , 49(12) : 89 -92 . DOI: 10.19817/j.cnki.issn 1006-3536.2021.12.018

References

[1] Drumright R E,Gruber P R,Henton D E.Polylactic acid technology[J].Advanced Materials,2000,12(23):1841-1846.
[2] Tsuji H,Ikada Y.Properties and morphologies of poly(L-lactide):1.annealing condition effects on properties and morphologies of poly(L-lactide)[J].Polymer,1995,36(14):2709-2716.
[3] Murariu M,Dechief A L,Bonnaud L,et al.The production and properties of polylactide composites filled with expanded graphite[J].Polymer Degradation & Stability,2010,95(5):889-900.
[4] Krul L P,Volozhyn A L,et al.Nanocomposites based on poly-D,L-lacticde and multiwall carbon nanotubes[J].Biomolecular Engineering,2007,24(1):93-95.
[5] Wu Chin San,Liao Hsin Tzu.Study on the preparation and characterization of biodegradable polylactide/multi-walled carbon nanotubes nanocomposites[J].Polymer:the International Journal for the Science & Technology of Polymers,2007,48(15):4449-4458.
[6] Song Wenhui,Zheng Zhen,Lu Haoxiang,et al.Incorporation of multi-walled carbon nanotubes into biodegradable telechelic prepolymers[J].Macromolecular Chemistry and Physics,2008,209(3):315-321.
[7] Moon S I,Jin F Z,Lee C J,et al.Novel carbon nanotube/poly(L-latic acid)composites;their modulus,thermal stability,and electrical conductivity[J].Macromolecular Symposia,2005,224(1):287-295.
[8] Petchwattana N,Naknaen P,Narupai B.Combination effects of reinforcing filler and impact modifier on the crystallization and toughening performances of poly(lactic acid)[J].Express Polymer Letters,2020,14(9):848-859.
[9] Petchwattana N,Covavisaruch S,Euapanthasate N.Utilization of ultrafine acrylate rubber particles as a toughening agent for poly(lactic acid)[J].Materials Science and Engineering:A,2012,532:64-70.
[10] Saeed U,Nawaz M A,Al-Turaif H A.Wood flour reinforced biodegradable PBS/PLA composites[J].Journal of Composite Materials,2018,52:2641-2650.
[11] Battegazzore D,Bocchini S,Frache A.Crystallization kinetics of poly(lactic acid)-talc composites[J].Express Polymer Letters,2011,5:849-858.
[12] Jia Z J,Wang Z Y,Liang J,et al.Production of short multi-walled carbon nanotubes[J].Carbon,1999,37:903-906.
[13] 王劭妤,石坚,郑来云.碳纳米管/PLA复合材料制备及性能[J].复合材料学报,2012,29(6):50-54.
Options
Outlines

/