[1] Scrosati B,Garche J.Lithium batteries:status,prospects and future[J].Journal of Power Sources,2010,195(9):2419-2430.
[2] Manthirm A.An outlook on lithium ion battery technology[J].ACS Central Science,2017,3(10):1063-1069.
[3] Nakamura K,Ohno H,Okamura K,et al.On the diffusion of Li+ defects in LiCoO2 and LiNiO2[J].Solid State Ionics,2000,135(1-4):143-147.
[4] Yamada S,Fujiwara M,Kanda M.Synthesis and properties of LiNiO2 as cathode material for secondary batteries[J].Journal of Power Sources,1995,54(2):209-213.
[5] Kalyani P,Kalaiselvi N.Various aspects of LiNiO2 chemistry:a review[J].Science and Technology of Advanced Materials,2005,6(6):689.
[6] Song M,Kwon I,Kim H,et al.Synthesis of LiNiO2 cathode by the combustion method[J].Journal of Applied Electrochemistry,2006,36(7):801-805.
[7] Cao G,Zhu J,Li Y,et al.Towards superior high-rate cyclability of fine LiNi0.88Co0.12O2 cathode materials for lithium-ion battery via a solvothermal routine[J].Mater Letters,2019,246:169-173.
[8] Zhu K,Wu T,Zhu Y,et al.Layered Fe-substituted LiNiO2 electrocatalysts for high-efficiency oxygen evolution reaction[J].ACS Energy Letters,2017,2(7):1654-1660.
[9] Li Z Y,Guo H,Ma X,et al.Al substitution induced differences in materials structure and electrochemical performance of Ni-rich layered cathodes for lithium-ion batteries[J].Journal of Physical Chemistry C,2019,123(32):19298-19306.
[10] Ouyang H,Li X,Wang Z,et al.Electrochemical and structural analysis of Mg substitution in lithium-rich layered oxide for lithium-ion battery[J].Ionics,2018,24(11):3347-3356.
[11] Ko H S,Kim J H,Wang J,et al.Co/Ti co-substituted layered LiNiO2 prepared using a concentration gradient method as an effective cathode material for Li-ion batteries[J].Journal of Power Sources,2017,372:107-115.
[12] Kim Y.Effects and distribution of Zr introduced in Ni-based cathode material for Li-ion batteries[J].Physical Chemistry Chemical Physics,2019,21(23):12505-12517.
[13] Ryu H H,Park G T,Yoon C S,et al.Suppressing detrimental phase transitions via tungsten doping of LiNiO2 cathode for next-generation lithium-ion batteries[J].Journal of Materials Chemistry A,2019,7(31):18580-18588.
[14] Xie Q,Li W,Manthiram A.A Mg-doped high-nickel layered oxide cathode enabling safer,high-energy-density Li-ion batteries[J].Chemistry of Materials,2019,31(3):938-946.
[15] Kong D,Hu J,Chen Z,et al.Ti-gradient doping to stabilize layered surface structure for high performance high-Ni oxide cathode of Li-ion battery[J].Advanced Functional Materials,2019,9(41):1901756.
[16] Weaving J S,Coowar F,Teagle D A,et al.Development of high energy density Li-ion batteries based on LiNi1-x-yCoxAlyO2[J].Journal of Power Sources,2001,97:733-735.
[17] Tran H Y,Greco G,Taubert C,et al.Influence of electrode preparation on the electrochemical performance of LiNi0.8Co0.15Al0.05O2 composite electrodes for lithium-ion batteries[J].Journal of Power Sources,2012,210:276-285.
[18] Ando K,Yamada Y,Nishikawa K,et al.Degradation analysis of LiNi0.8Co0.15Al0.05O2 for cathode material of lithium-ion battery using single-particle measurement[J].ACS Applied Energy Materials,2018,1(9):4536-4544.
[19] Trease N M,Seymour I D,Raadin M D,et al.Identifying the distribution of Al3+ in LiNi0.8Co0.15Al0.05O2[J].Chemistry of Materials,2016,28(22):8170-8180.
[20] Xia H,Liu C,Shen L,et al.Structure and thermal stability of LiNi0.8Co0.15Al0.05O2 after long cycling at high temperature[J].Journal of Power Sources,2020,450:227695.
[21] Liu Y,Tang Linbo,Wei Hanxin,et al.Enhancement on structural stability of Ni-rich cathode materials by in-situ fabricating dual-modified layer for lithium-ion batteries[J].Nano Energy,2019,65:104043.
[22] Zheng S,Huang R,Makimura Y,et al.Microstructural changes in LiNi0.8Co0.15Al0.05O2 positive electrode material during the first cycle[J].Journal of the Electrochemical Society,2011,158(4):A357-A362.
[23] Muto S,Sasano Y,Tatsumi K,et al.Capacity-fading mechanisms of LiNiO2-based lithium-ion batteries Ⅱ.diagnostic analysis by electron microscopy and spectroscopy[J].Journal of the Electrochemical Society,2009,156(5):A371-A377.
[24] Wang Y Y,Sun Y Y,Liu S,et al.Na-doped LiNi0.8Co0.15Al0.05O2 with excellent stability of both capacity and potential as cathode materials for Li-ion batteries[J].ACS Applied Energy Materials,2018,DOI:10.1021/acsaem.8b00630.
[25] Xie H,Du K,Hu G,et al.The role of sodium in LiNi0.8Co0.15Al0.05O2 cathode material and its electrochemical behaviors[J].Journal of Physical Chemistry C,2016,120(6):3235-3241.
[26] Huang B,Li X,Wang Z,et al.Synthesis of Mg-doped LiNi0.8Co0.15Al0.05O2 oxide and its electrochemical behavior in high-voltage lithium-ion batteries[J].Ceramics International,2014,40(8):13223-13230.
[27] Liu D,Liu S,Zhang C,et al.Revealing the effect of Ti doping on significantly enhancing cyclic performance at a high cutoff voltage for Ni-Rich LiNi0.8Co0.15Al0.05O2 cathode[J].ACS Sustainable Chemistry & Engineering,2019,7:10661-10669.
[28] Li X,Xie Z,Liu W,et al.Effects of fluorine doping on structure,surface chemistry,and electrochemical performance of LiNi0.8Co0.15Al0.05O2[J].Electrochimica Acta,2015,174:1122-1130.
[29] Chen T,Li X,Wang H,et al.The effect of gradient boracic polyanion-doping on structure,morphology,and cycling performance of Ni-rich LiNi0.8Co0.15Al0.05O2 cathode material[J].Journal of Power Sources,2018,392(15):296-296.
[30] Yoon S,Jung K N,Yeon S H,et al.Electrochemical properties of LiNi0.8Co0.15Al0.05O2-graphene composite as cathode materials for lithium-ion batteries[J].Journal of Electroanalytical Chemistry,2012,683:88-93.
[31] Liu Z,Wang Z,Lu T,et al.Modification of LiNi0.8Co0.15Al0.05O2 using nanoscale carbon coating[J].Journal of Alloys and Compounds,2018,763:701-710.
[32] Gao P,Jiang Y,Zhu Y,et al.Improved cycle performance of nitrogen and phosphorus co-doped carbon coatings on lithium nickel cobalt aluminum oxide battery material[J].Journal of Materials Science,2018,53(13):9662-9673.
[33] Lai Y Q,Xu M,Zhang Z A,et al.Optimized structure stability and electrochemical performance of LiNi0.8Co0.15Al0.05O2 by sputtering nanoscale ZnO film[J].Journal of Power Sources,2016,309:20-26.
[34] Liu B S,Sui X L,Zhang S H,et al.Investigation on electrochemical performance of LiNi0.8Co0.15Al0.05O2 coated by heterogeneous layer of TiO2[J].Journal of Alloys and Compounds,2018,739:961-971.
[35] He X,Du C,Shen B,et al.Electronically conductive Sb-doped SnO2 nanoparticles coated LiNi0.8Co0.15Al0.05O2 cathode material with enhanced electrochemical properties for Li-ion batteries[J].Electrochimica Acta,2017,236:273-279.
[36] Huang Y,Huang Y,Hu X.Enhanced electrochemical performance of LiNi0.8Co0.15Al0.05O2 by nanoscale surface modification with Co3O4[J].Electrochimica Acta,2017,231:294-299.
[37] Kim H B,Park B C,Myung S T,et al.Electrochemical and thermal characterization of AlF3-coated Li[Ni0.8Co0.15Al0.05]O2 cathode in lithium-ion cells[J].Journal of Power Sources,2008,179(1):347-350.
[38] Liu W,Tang X,Qin M,et al.FeF3-coated LiNi0.8Co0.15Al0.05O2 cathode materials with improved electrochemical properties[J].Materials Letters,2016,185:96-99.
[39] Lee D J,Scrosati B,Sun Y K.Ni3(PO4)2-coated Li[Ni0.8Co0.15Al0.05]O2lithium battery electrode with improved cycling performance at 55℃[J].Journal of Power Sources,2011,196(18):7742-7746.
[40] Qi R,Shi J L,Zhang X D,et al.Improving the stability of LiNi0.80Co0.15Al0.05O2 by AlPO4 nanocoating for lithium-ion batteries[J].Science China Chemistry,2017,60(9):1230-1235.
[41] Xia S,Li F,Chen F,et al.Preparation of FePO4 by liquid-phase method and modification on the surface of LiNi0.8Co0.15Al0.05O2 cathode material[J].Journal of Alloys and Compounds,2018,731:428-436.
[42] Chen J,Zhu L,Jia D,et al.LiNi0.8Co0.15Al0.05O2 cathodes exhibiting improved capacity retention and thermal stability due to a lithium iron phosphate coating[J].Electrochimica Acta,2019,312:179-187.
[43] He X,Xu X,Wang L,et al.Enhanced electrochemical performance of LiNi0.8Co0.15Al0.05O2 cathode material via Li2TiO3 nanoparticles coating[J].Journal of the Electrochemical Society,2019,166(2):A143-A150.
[44] 李荐,刘良秦,周宏明,等.导电聚合PEDOT∶PSS包覆对LiNi0.8Co0.15Al0.05O2正极材料性能的影响[J].材料化学前沿,2018,6(3):80-89.
[45] Lai C H,Ashby D S,Lin T C,et al.Application of poly (3-hexylthiophene-2,5-diyl) as a protective coating for high rate cathode materials[J].Chemistry of Materials,2018,30(8):2589-2599.
[46] Cho Y,Oh P,Cho J.A new type of protective surface layer for high-capacity Ni-based cathode materials:nanoscaled surface pllaring layer[J].Nano Letters,2013,13:1145-1152.
[47] Zheng J.Yang Z,Dai A,et al.Boosting cell performance of LiNi0.8Co0.15Al0.05O2 via surface structure design[J].Small,2019,1904854.