In order to solve the problems of the shuttle effect and volume expansion of lithium-sulfur batteries,the CPM-200-InMn@S/ppy composite material was prepared as the cathode material,and it showed excellent electrochemical performance.The specific discharge capacity can reach 952.42mAh/g for the first time at 0.1C,and the capacity retention rate can reach 38.56% after 100 cycles.CPM-200-InMn@S/ppy combined the dual advantages of CPM-200-InMn and polypyrrole (ppy) at the same time,not only had the high conductivity of ppy,but also had the structural characteristics and large specific surface area of CPM-200-InMn,so that the shuttle effect and volume expansion can be suppressed by physical adsorption and chemical catalysis.Compared with CPM-200-InMn@S cathode material,CPM-200-InMn@S/ppy shown a higher reversible capacity and more excellent rate performance.
Zhang Mi, Yao Jia, Han Guodong, Wang Juan
. Study on the CPM-200-InMn@S/ppy composite material as new cathode material for high performance lithium sulfur battery[J]. New Chemical Materials, 2021
, 49(8)
: 116
-120
.
DOI: 10.19817/j.cnki.issn 1006-3536.2021.08.024
[1] Madian M,Eychmuller A,Giebeler L,et al.Current advances in TiO2-based nanostructure electrodes for high performance lithium ion batteries[J].Batteries,2018,4(1):7.
[2] Singh M,Kaiser J,Hahn H,et al.Effect of porosity on the thick electrodes for high energy density lithium ion batteries for stationary applications[J].Batteries,2016,2(4):35.
[3] Chawla N,Bharti N,Singh S,et al.Recent advances in non-flammable electrolytes for safer lithium-ion batteries[J].Batteries,2019,5(1):19.
[4] Yu M,Ma J,Song H,et al.Atomic layer deposited TiO2 on anitrogen-doped graphene/sulfur electrode for high performance lithium-sulfur battery[J].Energy & Environmental Science,2016,9(4):1495-1503.
[5] Liang G,Wu J,Qin X,et al.Ultrafine TiO2decorated carbon nanofibers as multifunctional interlayer for high-performance lithium-sulfur battery[J].ACS Applied Materials & Interfaces,2016,8(35):23105-23113.
[6] Pan H,Han K S,Englhard M H,et al.Addressing passivation in lithium-sulfur battery under lean electrolyte condition[J].Advanced Functional Materials,2018,28(38):1707234.
[7] Xue M,Chen C,Tan Y,et al.Mangosteen peel-derived porous carbon:synthesis and its application in the sulfur cathode for lithium sulfur battery[J].Journal of Materials Science,2018,53(15):11062-11077.
[8] Zeng W,Wang Z,Cheng M C,et al.Structured titanium nitride nanotube arrays/sulfur composite as cathode materials for advanced lithium sulfur battery[J].Journal of The Electrochemical Society,2018,165(5):A1011-A1018.
[9] Ma G,Huang F,Wen Z,et al.Enhanced performance of lithium sulfur battery with conductive polymer modified separator[J].Journal of Materials Chemistry A,2016,4(43):16968-16974.
[10] Wu X,Fan L,Wang M,et al.Long-life lithium-sulfur battery derived from nori-based nitrogen and oxygen dual-doped 3D hierarchical biochar[J].ACS Applied Materials & Interfaces,2017,9(22):18889-18896.
[11] Balach J,Jaumann T,Klose M,et al.Mesoporous carbon interlayers with tailored pore volume as polysulfide reservoir for high-energy lithium-sulfur batteries[J].Journal of Physical Chemistry C,2015,119(9):4580-4587.
[12] Dornbusch D A,Hilton R,Gordon M J,et al.Effects of carbon surface area on performance of lithium sulfur battery cathodes[J].Journal of Industrial and Engineering Chemistry,2013,19(6):1968-1972.
[13] Li M,Carter R E,Douglas A,et al.Sulfur vapor-infiltrated 3-D carbon nanotube foam for binder-free high areal capacity lithium sulfur battery composite cathodes[J].ACS Nano,2017,11(5):4877-4884.
[14] Nitze F,Fossum K,Xiong S,et al.Sulfur-doped ordered mesoporous carbons:a stability-improving sulfur host for lithium-sulfur battery cathodes[J].Journal of Power Sources,2016,317:112-119.
[15] Carter R,Davis B,Oakes L,et al.A high areal capacity lithium sulfur battery cathode by site-selective vapor infiltration of hierarchical carbon nanotube arrays[J].Nanoscale,2017,9(39):15018-15026.
[16] Zhang Y Z,Zong X L,Zhan L,et al.Double-shelled hollow carbon sphere with microporous outer shell towards high performance lithium-sulfur battery[J].Electrochimica Acta,2018,284:89-97.
[17] Kang H S,Sun Y K.Freestanding bilayer carbon-sulfur cathode with function of entrapping polysulfide for high performance Li-S batteries[J].Advanced Functional Materials,2016,26(8):1225-1232.
[18] Fan L,Wu H,Wu X,et al.Fe-MOF derived jujube pit like Fe3O4/C composite as sulfur host for lithium-sulfur battery[J].Electrochimica Acta,2018,295:444-451.
[19] Qian X,Jin L,Wang S,et al.Zn-MOF drived micro/meso porous carbon nanorod for high performance lithium-sulfur battery[J].RSC Advances,2016,6(97):94629-94635.
[20] Chen H,Xiao Y,Chen C,Conductive MOF-modified separator for mitigating the shuttle effect of lithium-sulfur battery through a filtration method[J].ACS Applied Materials & Interfaces,2019,11(12):11459-11465.
[21] Meng X,Gao Q.Porous carbon from carbonized metal-organic frameworks for lithium sulphur batteries[J].Chemical Journal of Chinese Universities-Chinese Edition,2014,35(8):1715-1719.
[22] Liu X F,Guo X,Wang R,et al.Manganese cluster-based MOF as efficient polysulfide-trapping platform for high-performance lithium-sulfur batteries[J].Journal of Materials Chemistry A,2019,7(6):2838-2844.
[23] Zhai Q G,Bu X H,Mao C Y,et al.Systematic and dramatic tuning on gas sorption performance in heterometallic metal-organic frameworks[J].Journal of the American Chemical Society,2016,138(8):2524-2527.