化工新型材料

化工新型材料 ›› 2020, Vol. 48 ›› Issue (6) : 211-215.

科学研究

MUF/十八烷相变微胶囊的制备与性能研究

^1,2

^1,2*

^1,2

作者信息 +

Synthesis and property of MUF/octadecane PCM

Wang Ting^1,2, Wang Hongbo^1,2, Fu Jiajia^1,2, Wang Wencong^1,2

Author information +

文章历史 +

Received		Published
2019-02-11		2020-06-20
Issue Date	Revised Date
2020-07-02	2019-02-11

PDF (5716K)

摘要

以三聚氰胺-尿素-甲醛树脂(MUF)为壁材,十八烷为芯材,采用原位聚合法制备出了表面光滑、分散均匀的相变微胶囊。通过扫描电镜(SEM)、差示扫描量热仪(DSC)、红外光谱(FT-IR)和偏光显微镜等方法分别测试了微胶囊的表面形貌、相变性能、化学结构和粒径分布;并采用偏光显微镜研究了微胶囊相变过程中的形貌变化。结果表明:乳化剂(SDS)用量和固化pH对微胶囊形貌有很大的影响,当SDS浓度为4%,pH为5.5～6时,制备的微胶囊表面光滑、分散均匀,平均粒径为12.2μm;DSC测试结果表明微胶囊熔融焓(ΔH_m)为223.5J/g、结晶焓(ΔH_c)为223.0J/g,芯材含量为95%,微胶囊的相变温度与芯材基本相同。

Abstract

The phase change microcapsules(PCM) containing n-octadecane with a melamine-urea-formaldehyde copolymer shell were successfully synthesized by in-situ polymerization.The surface morphology,melting and crystallization properties,chemical structure and diameter distribution of the microcapsules were investigated by using SEM,DSC,FT-IR and polarizing microscope respectively.And the morphology changes of the microcapsules during phase transition were observed by polarizing microscope.The results showed that emulsifier concentration and pH value had a great influence on the morphology of the microcapsules.The optimal emulsifier concentration and pH value were 4% and 5.5～6 respectively.The microcapsules prepared at this condition were dispersed uniformly and had smooth surface with average partical size of 12.2μm.The DSC testing results showed that the microcapsules had the melting enthalpy of 223.5J/g,the crystalline enthalpy of 223.0J/g and core content of 95%.The phase transition temperature of microcapsules was the same as that of core material.

关键词

十八烷 / 三聚氰胺-尿素-甲醛树脂 / 原位聚合法 / 相变微胶囊

Key words

octadecane / melamine-urea-formaldehyde resin / in-situ polymerization / phase change microcapsule

引用本文

引用格式 ▾

MUF/十八烷相变微胶囊的制备与性能研究[J]. 化工新型材料, 2020, 48(6): 211-215 DOI:

登录浏览全文

4963

注册一个新账户忘记密码

参考文献

原文顺序 | 出版日期 | 本文引用

[1] 刘杰.相变储能材料的研究及其工业化应用[J].陶瓷,2014(2):30-32.
[2] 叶锋,曲江兰,仲俊瑜,等.相变储热材料研究进展[J].过程工程学报,2010,10(6):1231-1241.
[3] 李志生,张姝婷.相变材料的研究进展与应用综述[J].建筑节能,2016,44(4):57-60.
[4] 张静,丁益民,陈念贻.相变储能材料的研究及应用[J].盐湖研究,2015,13(3)52-58.
[5] 陈荣国,陈艺兰,刘心中,等.相变材料及其在建筑节能中的应用[J].材料导报,2015,29(23):51-57.
[6] Kwon O S,Jang J,Bae J.A review of fabrication methods and applications of novel tailored microcapsules[J].Current Organic Chemistry,2013,17(1):3-13.
[7] 潘志文,王文利,王秋,等.基于相变微胶囊的功能纺织品制备与应用研究[J].化工新型材料,2018,46(11):256-259.
[8] 史汝琨,王瑞,刘星,等.相变微胶囊/SMS智能调温织物的制备及性能研究[J].材料导报,2015,29(14):26-30.
[9] 李军,黄际伟,李庆彪.壁材掺杂碳纳米管的相变微胶囊的制备及热性能研究[J].功能材料,2014,45(S2):110-114.
[10] 马保国,金磊,蹇守卫.石蜡相变微胶囊的制备及在建材中的应用[J].建材世界,2009,30(1):51-55.
[11] 杭祖圣,陈西如,谈玲华,等.三聚氰胺甲醛树脂壁微胶囊的研究进展[J].微纳电子技术,2010,47(5):308-314.
[12] 李彦庆,李怡蕙,张丽燕,等.氨基卟啉和多壁碳纳米管改性三聚氰胺-尿素-甲醛树脂/石蜡微胶囊的制备[J].化工新型材料,2018,46(7):89-92.
[13] 马荔,尹德忠,杜筱,等.有机无机杂化囊壳型微胶囊相变材料的研究进展[J].化工新型材料,2014,42(3):1-3.
[14] Li Benxia,Liu Tongxuan,Hu Luyang,et al.Fabrication and properties of microencapsulated paraffin@SiO₂ phase change composite for thermal energy storage[J].ACS Sustainable Chemistry & Engineering,2013,1(3):374-380.
[15] Khakzad F,Alinejad Z,Shirin-Abadi A R,et al.Optimization of parameters in preparation of PCM microcapsules based on melamine formaldehyde through dispersion polymerization[J].Colloid and Polymer Science,2014,292(2):355-368.
[16] 张慧洁.功能调温织物的研究[D].广州:华南理工大学,2012.
[17] 倪卓,周方宇,蔡弘华,等.MUF/石蜡相变储能材料的制备及其表征[J].化学与粘合,2015,37(3):159-163,179.
[18] 王辉,杜官本,梁坚坤,等.三聚氰胺-尿素-甲醛共缩聚树脂固化过程分析[J].西北林学院学报,2013,28(4):166-169.
[19] Zhang Xingxiang,Tao Xiaoming,Yick Kitlun,et al.Structure and thermal stability of microencapsulated phase-change materials[J].Colloid Polym Sci,2004(282):330-336.
[20] Jin Zhaoguo,Wang Yande,Liu Jiguang,et al.Synthesis and properties of paraffin capsules as phase change materials[J].Polymer,2008,49:2903-2910.