介绍了聚醚醚酮(PEEK)的基本性能,有针对性地分析了国内外PEEK生产企业及其产品,同时分析了PEEK的生产及消费情况,指出了我国PEEK产业发展过程中出现的问题及建议。
The basic properties of polyether ether ketone (PEEK) were introduced,and analyzed the domestic and foreign enterprises producing PEEK and their products.At the same time,it was expounded the production and consumption of PEEK,and put forward the urgent problems and suggestion.
[1] 王宝成,李鲲,周海鸥.高性能工程塑料聚醚醚酮的开发研究[J].化工科技,2006,14(5):46-48.
[2] Balaji V,Tiwari A N,Goyal R K.Fabrication and properties of high performance PEEK/Si3N4 nanocomposites[J].Journal of Applied Polymer Science,2011,119(1):311-318.
[3] Tharajak J,Palathai T,Sombatsompop N.Morphological and physical properties and friction/wear behavior of h-BN filled PEEK composite coatings[J].Surface & Coatings Technology,2015,273:20-29.
[4] Kalin M,Zalaznik M,Novak S.Wear and friction behaviour of poly-ether-ether-ketone (PEEK) filled with graphene,WS2 and CNT nanoparticles[J].Wear,2015,332-333:855-862.
[5] Miyazaki T,Matsunami C,Shirosaki Y.Bioactive carbon-PEEK composites prepared by chemical surface treatment[J].Mater Sci Eng C Mater Biol Appl,2017,70:71-75.
[6] 陈浩然,李勇,还大军,等.热塑性自动铺放预浸纱制备质量控制及性能研究[J].航空学报,2018,39(6):228-237.
[7] 李长林,黄志刚,翁云宜.PEEK特种工程塑料耐磨改性研究进展及其应用展望[J].中国塑料,2018,32(4):18-23.
[8] 张婷.高性能热塑性复合材料在大型客机结构件上的应用[J].航空制造技术,2013,435(15):32-35.
[9] 林有希,高诚辉.汽车用聚醚醚酮复合材料研究[J].汽车技术,2005,10(12):40-43.
[10] 王枫,王子君,李建星等.高速轴承保持架用聚醚醚酮复合材料成形工艺[J].轴承,2009(1):31-33.
[11] Feerick E M,Kennedy J,Mullett H,et al.Investigation of metallic and carbon fibre PEEK fracture fixation devices for three-part proximal humeral fractures[J].Medical Engineering & Physics,2013,35(6):712-722.
[12] 陈天杰,刘红,刘称称,等.聚醚醚酮复合材料在口腔医学领域中的应用[J].现代口腔医学杂志,2017(6):50-53.
PDF
(1244KB)
