向聚左旋乳酸/聚右旋乳酸(PLLA/PDLA)共混物中添加成核剂苯基磷酸锌(TMC-210)来调控其结晶行为。采用差示扫描量热仪(DSC)和广角X-ray衍射仪系统表征不同结晶条件下成核剂对PLLA/PDLA共混物结晶行为的影响。结果表明:成核剂TMC-210对PLLA/PDLA共混物中的立构晶(SC晶)有促进成核作用,最佳含量为0.8%(wt,质量分数,下同);PLLA/PDLA在高于150℃条件下等温10min,无晶体形成,0.8% TMC-210的加入显著提高了PLLA/PDLA共混物在高温下SC晶的结晶速度,在170℃等温时SC晶的半结晶时间为0.84min;在升降温的结晶过程中,PLLA/PDLA/TMC样品最终SC晶的含量高于PLLA/PDL样品,表明成核剂TMC在促进PLLA/PDLA共混物中SC晶的形成效果显著。
The crystallization behavior of PLLA/PDLA blends was regulated by adding phenyl zinc phosphate (TMC-210) nucleating agent.The effect of nucleating agent on the crystallization behavior of blends was studied by differential scanning calorimetry (DSC) and wide angle X-ray diffractometer(WAXD).The results showed that the TMC-210 had nucleation effect on the stereo complex crystals of blends,and the best content was 0.8wt%.There was no formation of crystals when PLLA/PDLA were isothermally crystallization above 150℃for 10min.However,the addition of TMC-210 (0.8wt%) significantly increased thecrystallization rate of stereo complex crystals of blends at high temperatures and the half-crystallization time of stereo complex crystals at 170℃ was 0.84min.Moreover,during the heating and cooling,the final content of stereo complex crystals of PLLA/PDLA/TMC sample was higher than that of PLLA/PDLA sample.The above results suggest that the TMC-210 nucleating agent can significantly prompted the formation of stereo complex crystals in PLLA/PDLA blend.
[1] Auras R,Harte B,Selke S.An overview of polylactides as packaging materials[J].Macromolecular Bioscience,2004,4(9):835-861.
[2] 李文飞,刘军海.聚乳酸改性的研究进展[J].化工新型材料,2011,39(1):25-27.
[3] 高翠丽,夏延致,纪全,等.聚乳酸的改性研究[J].材料导报,2006,20(5):372-374.
[4] Ikada Y,Jamshidi K,Tsuji H,et al.Stereocomplex formation between enantiomeric poly(lactides)[J].Macromolecules,1987,20:904-906.
[5] He Y,Xu Y,Wei J,et al.Unique crystallization behavior of poly(l-lactide)/poly(d-lactide) stereocomplex depending on initial melt states[J].Polymer,2008,49(26):5670-5675.
[6] Urayama H,Kanamori T,Fukushima K,et al.Controlled crystalnucleation in themelt-crystallization of poly(l-lactide) and poly(l-lactide)/poly(d-lactide) stereocomplex[J].Polymer,2003,44(19):5635-5641.
[7] Xiong Z,Zhang X,Wang R,et al.Favorable formation of stereocomplex crystals in poly(l-lactide)/poly(d-lactide) blends by selective nucleation[J].Polymer,2015,76:98-104.
[8] Han L,Pan P,Shan G,et al.Stereocomplex crystallization of high-molecular-weight poly(l-lactic acid)/poly(d-lactic acid) racemic blends promoted by a selective nucleator[J].Polymer,2015,63:144-153.
[9] Urayama H,Kanamori T,Fukushima K,et al.Controlled crystal nucleation in the melt-crystallization ofpoly(l-lactide) and poly(l-lactide)/poly(d-lactide) stereocomplex[J].Polymer,2003,44(19):5635-5641.
[10] Zhang J,Tashiro K,Tsuji H,et al.Investigation of phase transitional behavior of poly(l-lactide)/poly(d-lactide) blend used to prepare the highly-oriented stereocomplex[J].Macromolecules,2007,40(4):1049-1054.
基金资助
国家自然科学基金(51673003,51628301);科技部重点基础材料技术提升与产业化重点专项(2017YFB0309300)
PDF
(2835KB)
