将有机蒙脱土(OMMT)和聚己内酰胺(PA6)切片在双螺杆挤出机中熔融共混并造粒,通过单螺杆挤出纺成大直径单丝,并检测其微观结构及性能。X射线衍射分析表明,添加OMMT有助于初生丝γ晶型的形成;扫描电镜观察显示OMMT在PA6基体中分散均匀;拉伸测试以及打结强度测试表明PA6/MMT单丝力学性能提高,OMMT添加量为4%(质量分数)时,单丝拉伸强度可提高17.1%～20.2%,打结强度可提高36.2%～39.5%。
Organic montmorillonite and polyamide were melt blended in a twin screw extruder and granulated.Then,they were spun into large diameter monodilament by a single screw extruder.X-ray diffraction showed that the formation of γ-crystal during primary filament stage was promoted by organic montmorillonite.Scanning electron microscope showed that particles were homogeneously dispersed in PA6 matrix.Mechanical test showed that when the addition of organic montmorillonite was 4%(mass fraction),the tensile strength was increased by 17.1%～20.2%,the knot strength was increased by 36.2%～39.5%.
[1] 陈海群,王海靖,朱俊武,等.偶联剂KH550修饰蒙脱土及MC尼龙/蒙脱土复合材料的制备与性能研究[J].中国塑料,2004,4(18):80-85.
[2] 王丽梅.吡啶盐改性蒙脱土的制备表征及在聚丙烯/蒙脱土纳米复合材料制备中的应用[J].硅酸盐通报,2011,6(3):674-677.
[3] Mohammad D,Gholamhossein M,Afshin N,et al.Organo-modified mesoporous caibon FDU-15 as new nanofiller for the preparation of nanocomposite materials based on nylon-6[J].Colloid Polymer Science,2015,293(1):569-575.
[4] Branislav Duleba,Emil Spišák,František GreškoviČ,et al.Mechanical properties of PA6/MMT polymer nanocomposites and prediction based on content of nanofiller[J].Procedia Engineering,2014,96(2):75-80.
[5] Kap J K,Jong S L,Arun A P,et al.Preparation and characte-rization of nylon 6/organoclay nanocomposite filament fibers[J].Society of Plastics Engineers,2009,1002(10):265-273.
[6] Mehran K,Farshid K,Ehsan K,et al.The effect of nano-composites on the mechanic and morphological characteristics of NBR/PA6 blends[J].American Journal of Oil and Chemical Technologies,2016,4(1):27-42.
[7] 李红尽.尼龙6/纳米蒙脱土复合材料制备及性能研究[J].合成纤维工业,2013,36(2):34.
[8] Nguyen Q T,Baird D G.Preparation of polymer-clay nanocomposites[J].Advances in Polymer Technology,2006,25(10):270-285.
[9] Buccella M,Dorigato A.Chain extension behavior and thermo-mechanical properties of polyamide 66[J].Polymer Engineering and Science,2014,17(5):161-169.
[10] Hajar Y,Denis R.Effect of nanocrystalline cellulose on morphological,thermal,and mechanical properties of nylon 6 composites[J].Society of Plastics Engineers,2014,1227(10):10-19.
基金资助
建筑用高性能纤维及土工材料的制备与工程应用关键技术研究(2016YFB0303100);基于液体冷却的功能性聚合物单丝研发及产业化(BA2015127)
PDF
(2566KB)
