化工新型材料

化工新型材料 ›› 2018, Vol. 46 ›› Issue (11) : 25-30.

综述与专论

木塑复合材料界面调控及其表征技术研究进展

^1,2

^2*

作者信息 +

Literature overview on interface control and characterization technique of wood-plastic composite

Yang Shoulu^1,2, Ji Ning¹, Huang Anxiang¹, Li Dan¹, Wu Yiqiang²

Author information +

文章历史 +

Received		Published
2017-07-23		2018-11-20
Issue Date	Revised Date
2018-12-04	2017-07-23

PDF (1222K)

摘要

木塑复合材料(WPC)是一种高性能、高附加值、环境友好且应用广泛的新型材料,其天然植物纤维和塑料基体间的界面调控成为WPC研究的热点和重点。综述了WPC界面调控方法,主要包括天然植物纤维调控、塑料基体表面改性、添加改性剂等方法,同时还介绍了WPC界面表征技术,如傅里叶红外光谱分析、扫描电子显微镜分析、透射电子显微镜、X射线光电子能谱分析、动态热机械分析、纳米压痕技术和原子力显微镜分析等表征技术,指出了WPC界面调控及其界面表征技术需要解决的问题,以期提高WPC的研究和开发水平。

Abstract

As a new type of material,wood-plastic composites (WPC) have been put into wide application for their excellent performance,high added-value and environment-friendly performance.The interface control between natural plant fiber and plastic matrix is a hot or an important research point.The interface control methods,which mainly included natural plant fiber modification,plastic matrix surface modification and adding modifier,were summarized.Meanwhile,the interface characterization technique,which mainly included fourier transform infrared spectroscopy (FT-IR),scanning electron microscopy (SEM),transmission electron microscopy (TEM),X-ray photoelectron spectroscopy (XPS),dynamic mechanical analysis (DMA),nano-indentation techniques and atomic force microscopy (AFM),were also introduced.Finally,the challenge of interface control and characterization technique was proposed with the aim at promoting the research and development level of WPC.

关键词

木塑复合材料 / 界面调控 / 表征技术 / 天然植物纤维 / 塑料基体

Key words

wood-plastic composite / interface control / characterization technique / natural plant fiber / plastic matrix

引用本文

引用格式 ▾

木塑复合材料界面调控及其表征技术研究进展[J]. 化工新型材料, 2018, 46(11): 25-30 DOI:

登录浏览全文

4963

注册一个新账户忘记密码

参考文献

原文顺序 | 出版日期 | 本文引用

[1] 李坚.木材科学[M].第3版.北京:科学出版社,2014:402-409.
[2] Kumar V,Tyagi L,Sinha S.Wood flour-reinforced plastic composites:a review[J].Reviews in Chemical Engineering,2011,27(5/6):253-264.
[3] Petinakis E,Yu L,Edward G,et al.Effect of matrix-partile interfacial adhesion on the mechanical properties of poly(lactic acid)/wood-flour micro-composites[J].Journal of Polymers and the Environment,2009,17(2):83-94.
[4] 霍中玲,谢兆设,陈猛.木塑复合材料型材配方工艺研究[J].工程塑料应用,2007,35(5):33-35.
[5] 鲁捷,徐开蒙,陈勇军,等.高温热处理杨木粉对木塑复合材料界面结合性能影响[J].林产工业,2015,42(8):25-28.
[6] Shebani A N,Reenen A J V,Meincken M.The effect of wood extractives on the thermal stability of different wood-LLDPE composites[J].Thermochimica Acta,2009,481(1):52-56.
[7] Hosseinaei O,Wang S,Enayati A A,et al.Effects of hemicellulose extraction on properties of wood flour and wood-plastic composites[J].Composites Part A Applied Science & Manufacturing,2012,43(4):686-694.
[8] Han G,Deng J,Zhang S,et al.Effect of steam explosion treatment on characteristics of wheat straw[J].Industrial Crops & Products,2010,31(1):28-33.
[9] 韩士群,杨莹,周庆,等.蒸汽爆破对芦苇纤维及其木塑复合材料性能的影响[J].南京林业大学学报:自然科学版,2017,41(1):136-142.
[10] 刘荣榕.PVC/木粉复合材料的制备及其性能的研究[D].上海:上海交通大学,2008.
[11] 未友国,敖宁建,张渊明.植物纤维/蒙脱土/橡胶发泡复合材料微孔结构的研究[J].电子显微学报,2008,27(5):379-383.
[12] 邓华,李淳,曾秋苑,等.微波辐射下秸秆纤维微观结构的变化[J].分析测试学报,2010,29(4):336-340.
[13] Liu Y,Tao Y,Lv X,et al.Study on the surface properties of wood/polyethylene composites treated under plasma[J].Applied Surface Science,2010,257(3):1112-1118.
[14] Alam A K M M,Beg M D H,Prasad D M R,et al.Structures and performances of simultaneous ultrasound and alkali treated oil palm empty fruit bunch fiber reinforced poly(lactic acid) composites[J].Composites Part A Applied Science & Manufacturing,2012,43(11):1921-1929.
[15] 曹明浪,张涛,曹金星,等.亚临界流体挤出法制备高密度聚乙烯/木粉复合材料[J].高分子材料科学与工程,2017,33(3):116-121.
[16] 周亚巍,宁莉萍,王燕高,等.木聚糖酶处理对西南桦木/HDPE复合材料性能的影响[J].复合材料学报,2014,31(2):338-344.
[17] Rojo E,Alonso M V,Domínguez J C,et al.Alkali treatment of viscose cellulosic fibers from eucalyptus wood:structural,morphological,and thermal analysis[J].Journal of Applied Polymer Science,2013,130(3):2198-2204.
[18] Rojo E,Oliet M,Alonso M V,et al.Mechanical and interfacial properties of phenolic composites reinforced with treated cellulose fibers[J].Polymer Engineering & Science,2014,54(10):2228-2238.
[19] Fang L,Chang L,Guo W J,et al.Influence of silane surface modification of veneer on interfacial adhesion of wood-plastic plywood[J].Applied Surface Science,2014,288(1):682-689.
[20] Islam M S,Hamdan S,Jusoh I,et al.The effect of alkali pretreatment on mechanical and morphological properties of tropical wood polymer composites[J].Materials & Design,2012,33(1):419-424.
[21] 周亚巍,宁莉萍,杨永前,等.木粉的酯化处理对木塑复合材料性能的影响[J].材料科学与工程学报,2014,32(4):572-576.
[22] 钟鑫,薛平,丁筠.改性木粉/PVC复合材料的性能研究[J].中国塑料,2004,18(3):62-66.
[23] 王光照,姜洪丽,程文家.秸秆粉的改性及其表面极性对木塑复合材料界面的影响[J].中国塑料,2017,31(3):53-57.
[24] Gao H,Xie Y,Ou R,et al.Grafting effects of polypropylene/polyethylene blends with maleic anhydride on the properties of the resulting wood-plastic composites[J].Composites Part A,2012,43(1):150-157.
[25] 李伟浩,刘超栋.ABS木塑复合材料的制备与研究[J].化工新型材料,2016,44(12):129-131.
[26] 李跃文,陈兴华,欧阳杰,等.GMA和共单体对聚乙烯木塑复合材料的直接反应增容[J].高分子学报,2012(6):621-627.
[27] Leu S Y,Yang T H,Lo S F,et al.Optimized material composition to improve the physical and mechanical properties of extruded wood-plastic composites (WPCs)[J].Construction & Building Materials,2012,29(7):120-127.
[28] Nörnberg B,Borchardt E,Luinstra G A,et al.Wood plastic composites from poly(propylene carbonate) and poplar wood flour-mechanical,thermal and morphological properties[J].European Polymer Journal,2014,51(1):167-176.
[29] 边慧光,胡纪全,汪传生,等.MAPP对木塑复合材料性能的影响[J].弹性体,2016,26(4):40-43.
[30] 曹金星,张玲,张云灿,等.相容剂对PP/木粉复合材料力学性能的影响[J].现代塑料加工应用,2017,29(2):47-50.
[31] 黄华尧,吴书鹏,刘畅,等.硅烷偶联剂对PE-HD基木塑复合材料力学性能的影响[J].中国塑料,2016,30(7):50-56.
[32] Moigne N L,Longerey M,Taulemesse J M,et al.Study of the interface in natural fibres reinforced poly(lactic acid) biocomposites modified by optimized organosilane treatments[J].Industrial Crops & Products,2014,52(1):481-494.
[33] 袁杰,路琴,唐健锋.GF及偶联剂改性PVC/稻壳木塑复合材料[J].工程塑料应用,2017,45(2):42-45.
[34] 毕永豹,杨兆哲,许民.3D打印PLA/麦秸粉复合材料的力学性能优化[J].工程塑料应用,2017,45(4):24-28.
[35] Zhang H.Effect of a novel coupling agent,alkyl ketene dimer,on the mechanical properties of wood-plastic composites[J].Materials & Design,2014,59(1):130-134.
[36] Yue X,Chen F,Mail X Z.Improved interfacial bonding of PVC/wood-flour composites by lignin amine modification[J].Bioresources,2011,6(2):2022-2034.
[37] 常萧楠,何春霞,付菁菁,等.竹炭和壳聚糖对聚氯乙烯基木塑复合材料界面性能的影响[J].复合材料学报,2016,33(9):2022-2029.
[38] 葛正浩,司丹鸽,侯珊.相容剂对PLA/PBS/秸秆粉木塑复合材料性能的影响[J].塑料,2017,46(2):77-79.
[39] 赵永生,王克俭,朱复华,等.蒙脱土/硅烷改性木粉/PVC复合材料[J].复合材料学报,2007,24(3):63-71.
[40] 邸明伟,尤来,赵婷玉,等.聚乙烯木塑复合材料的异氰酸酯表面处理与胶接[J].建筑材料学报,2016,19(1):94-99.
[41] Schirp A,Stender J.Properties of extruded wood-plastic composites based on refiner wood fibres (TMP fibres) and hemp fibres[J].European Journal of Wood & Wood Products,2010,68(2):219-231.
[42] 齐菁,于洪亮.偶联剂对木纤维/LDPE复合材料影响的动态力学热分析[J].林业机械与木工设备,2017,45(5):29-31.
[43] Lee S H,Wang S,Pharr G M,et al.Evaluation of interphase properties in a cellulose fiber-reinforced polypropylene composite by nanoindentation and finite element analysis[J].Composites Part A Applied Science & Manufacturing,2007,38(6):1517-1524.
[44] Gu Y,Li M,Wang J,et al.Characterization of the interphase in carbon fiber/polymer composites using a nanoscale dyna-mic mechanical imaging technique[J].Carbon,2010,48(11):3229-3235.
[45] Nair S S,Wang S,Hurley D C.Nanoscale characterization of natural fibers and their composites using contact-resonance force microscopy[J].Composites Part A Applied Science & Manufacturing,2010,41(5):624-631.
[46] Pakzad A,Simonsen J,Yassar R S.Gradient of nanomechanical properties in the interphase of cellulose nanocrystal composites[J].Composites Science & Technology,2012,72(2):314-319.