聚氨酯泡沫(PUF)在多个领域均有较高应用需求。对PUF的制备及发展方向进行了系统综述,概述了PUF的制备方法,并从生物质PUF、PUF功能化、医用PUF和PUF的绿色回收四方面对PUF的研究现状进行总结分析。最后,在此基础上讨论了PUF材料的发展趋势,展望了PUF材料在不同领域的发展前景。
Polyurethane foam (PUF) has a high application demand in many fields.In this paper,the preparation and development directions of PUF were systematically reviewed,the preparation methods of PUF were summarized,and the research status of PUF was summarized and analyzed from four aspects:biomass PUF,PUF functionalization,medical PUF and green recovery of PUF.Finally,the development trends of PUF materials were discussed,and the development prospects of PUF materials in different fields were presented.
[1] 张超,潘旺,方宏远,等.聚氨酯泡沫注浆修复材料泡孔结构特征及抗压性能研究进展[J].材料导报,2024,38(3):229-242.
[2] 刘旭琦,李双阳,王玲轩,等.聚氨酯膜的研究进展[J].化工新型材料,2023,51(9):8-12.
[3] Wang H R,Li T,Li J,et al.Structural engineering of polyurethanes for biomedical applications[J].Progress in Polymer Science,2024,151:101803.
[4] 赵彤.高强高韧聚氨酯发泡灌封材料的制备及其固化特性研究[D].西安:西安理工大学,2024.
[5] Lim H,Kim S,Kim B.Effects of silicon surfactant in rigid polyurethane foams[J].Express Polymer Letters,2008,2(3):194-200.
[6] Chian K S,Gan L H.Development of a rigid polyurethane foam from palm oil[J].Journal of Applied Polymer Science,2015,68(3):509-515.
[7] Mahmood N,Yuan Z,Schmidt J,et al.Depolymerization of lignins and their applications for the preparation of polyols and rigid polyurethane foams:a review[J].Renewable & Sustainable Energy Reviews,2016,60:317-29.
[8] 源梓滔.软质聚氨酯泡沫塑料生产放热及热分解过程的特性与机理研究[D].广州:广东工业大学,2022.
[9] 沈坚,张骥红.中国聚氨酯泡沫塑料行业状况及“十三五”发展建议[J].聚氨酯工业,2015,30(4):1-4.
[10] 王维.生物基聚氨酯泡沫的制备及其性能研究[D].无锡:江南大学,2021.
[11] Ates M,Karadag S,Eker A A,et al.Polyurethane foam materials and their industrial applications[J].Polymer International,2022,71(10):1157-1163.
[12] 丛文龙.鼻腔填塞止血用聚氨酯泡沫敷料制备及应用研究[D].北京:北京化工大学,2022.
[13] 钟银燕.木质素基聚氨酯泡沫制备及在油水分离的应用研究[D].沈阳:东北电力大学,2022.
[14] 吕小健,于向伟,史中行,等.硬段含量对聚氨酯泡沫材料性能的影响[J].热固性树脂,2020,35(5):46-50.
[15] 于向伟.硬质聚氨酯多孔材料的制备及性能研究[D].青岛:青岛科技大学,2020.
[16] Lang S,Gerschitzka M,Bauer D,et al.Thermal conductivity of vacuum insulation materials for thermal energy stores in solar thermal systems[J].Energy Procedia,2016,91:172-181.
[17] 许晓辰.硬质聚氨酯泡沫塑料的发展及应用[J].化工设计通讯,2020,46(3):3-4.
[18] Wang W,Wang D,Xia B H,et al.Rigid polyurethane foams based on dextrin and glycerol[J].Industrial Crops and Products,2022,177:14479.
[19] Vale M,Mateus M M,Santos R G,et al.Replacement of petroleum-derived diols by sustainable biopolyols in one component polyurethane foams[J].Journal of Cleaner Production,2019,212:1036-1043.
[20] Ranote S,Kumar D,Kumari S,et al.Green synthesis of Moringa oleifera gum-based bifunctional polyurethane foam braced with ash for rapid and efficient dye removal[J].Chemical Engineering Journal,2019,361:1586-1596.
[21] Wu J L,Ma X Z,Gnanasekar P,et al.Superhydrophobic lignin-based multifunctional polyurethane foam with SiO2 nanoparticles for efficient oil adsorption and separation[J].Science of the Total Environment,2023,860:160276.
[22] Czerwonka G,Zakrzewska P,Oleksy M,et al.The influence of biowaste-based fillers on the mechanical and fire properties of rigid polyurethane foams[J].Sustainable Materials and Technologies,2023,36:e00610.
[23] Chen J,Wu J L,Zhong Y Y,et al.Multifunctional superhydrophilic/underwater superoleophobic lignin-based polyurethane foam for highly efficient oil-water separation and water purification[J].Separation and Purification Technology,2023,311:123284.
[24] Zhao Q B,Wan Y Q,Chang F,et al.Photothermal converting polypyrrole/polyurethane composite foams for effective solar desalination[J].Desalination,2022,527:115581.
[25] Meng D,Wang K H,Wang W J,et al.A biomimetic structured bio-based flame retardant coating on flexible polyurethane foam with low smoke release and antibacterial ability[J].Chemosphere,2023,312:137060.
[26] Caba V,Borgese L,Agnelli S,et al.A green and simple process to develop conductive polyurethane foams for biomedical applications[J].International Journal of Polymeric Materials,2018:1-8.
[27] Ma X Z,Zhang C,Gnanasekar P,et al.Mechanically robust,solar-driven,and degradable lignin-based polyurethane adsorbent for efficient crude oil spill remediation[J].Chemical Engineering Journal,2021,415:128956.
[28] Shi Y F,Zhong Y Y,Sun Z,et al.One-step foam assisted synthesis of robust superhydrophobic lignin-based magnetic foams for highly efficient oil-water separation and rapid solar-driven heavy oil removal[J].Journal of Water Process Engineering,2022,46:102643.
[29] Li S Q,Zhang Y S,Ma X Z,et al.Antimicrobial lignin-based polyurethane/Ag composite foams for improving wound healing[J].Biomacromolecules,2022,23(4):1622-1632.
[30] 高尚东.亲水性聚氨酯泡沫伤口敷料的制备及性能研究[D].天津:天津大学,2021.
[31] Magnin A,Entzmann L,Bazin A,et al.Green recycling process for polyurethane foams by a chem-biotech approach[J].Chemsuschem,2021,14(19):4234-4241.
[32] Wang Q H,Xia W,Wu W L,et al.Flexible,all-solid-state supercapacitors derived from waste polyurethane foams[J].Chemical Engineering Journal,2022,431:133228.
[33] Sheppard D T,Jin K L,Hamachi L S,et al.Reprocessing postconsumer polyurethane foam using carbamate exchange catalysis and twin-screw extrusion[J].ACS Central Science,2020,6(6):921-927.
PDF
