化工新型材料

化工新型材料 ›› 2024, Vol. 52 ›› Issue (12) : 106-110. DOI: 10.19817/j.cnki.issn1006-3536.2024.12.032

新材料与新技术

柔性MOF衍生硫化亚锡/碳纤维的制备及储钠性能

作者信息 +

Preparation and sodium storage performance of flexible MOF-derived stannous sulfide/carbon nanofibers

Wu Caiqin, Dai Han, Li Zhengchun, Qiao Hui

Author information +

文章历史 +

Received		Published
2023-10-23		2024-12-20
Issue Date	Revised Date
2024-12-12	2023-10-23

PDF

摘要

将Sn-MOF分散在N,N-二甲基甲酰胺中,并加入聚丙烯腈(PAN)静电纺丝得到Sn-MOF/PAN纳米纤维,经过高温煅烧后得到了硫化亚锡/碳纤维(SnS/CNFs)。SnS/CNFs-2电极材料具有良好的柔性,在弯折状态下依然保持着良好的柔性。通过扫描电镜、X射线衍射仪和EDS元素分析等表征方法,测定了SnS/CNFs-2的形貌、晶体结构。将该柔性电极材料作为钠离子电池负极材料时,表现出优异的倍率性能和循环稳定性。结果表明:对于SnS/CNFs-2电极材料,其具有良好的倍率性能,在1A/g、2A/g、5A/g、10A/g的电流密度下对应的放电比容量分别为271mAh/g、236mAh/g、157mAh/g、64mAh/g。另外,SnS/CNFs-2复合纳米材料在高达1A/g的大电流密度下表现出良好的循环稳定性,循环100圈后,放电容量高达260mAh/g。

Abstract

Sn-MOF powders were dispersed in N,N-dimethylformamide,and then added with polyacrylonitrile (PAN) electrospinning to obtain Sn-MOF/PAN nanofibers.The nanofibers were calcined at high temperature to prepare stannous sulfide/carbon nanofibers (SnS/CNFs).The SnS/CNFs-2 electrode had good flexibility and it could still maintain good flexibility in the bending state.The morphology and crystal structure of SnS/CNFs-2 were determined by SEM,XRD and EDS.When the flexible material was used as the anode material of sodium-ion battery,it exhibited excellent rate performance and cyclic stability.The results showed that for SnS/CNFs-2 composite,the corresponding specific discharge capacities under the current density of 1A/g,2A/g,5A/g,and 10A/g were 270mAh/g,236mAh/g,157mAh/g,64mAh/g,respectively.In addition,the SnS/CNFs-2 nanofibers showed good cyclic stability at a high current density of 1A/g,with a discharge capacity of up to 260 mAh/g after 100 cycles.

关键词

SnS / Sn-MOF / 静电纺丝 / 自支撑电极 / 钠离子电池

Key words

SnS / Sn-MOF / electrospinning / flexible electrode / sodium-ion battery

引用本文

引用格式 ▾

柔性MOF衍生硫化亚锡/碳纤维的制备及储钠性能[J]. 化工新型材料, 2024, 52(12): 106-110 DOI:10.19817/j.cnki.issn1006-3536.2024.12.032

登录浏览全文

4963

注册一个新账户忘记密码

参考文献

原文顺序 | 出版日期 | 本文引用

[1] Cui J,Yao S S,Kim J K.Recent progress in rational design of anode materials for high-performance Na-ion batteries[J].Energy Storage Materials,2017,7:64-114.
[2] Li L,Zheng Y,Zhang S L,et al.Recent progress on sodium ion batteries:potential high-performance anodes[J].Energy & Environmental Science,2018,11(9):2310-2340.
[3] Wei Z X,Wang L,Zhuo M,et al.Layered tin sulfide and selenide anode materials for Li-and Na-ion batteries[J].Journal of Materials Chemistry A,2018,6(26):12185-12214.
[4] Wu X,Lan X X,Hu R Z,et al.Tin-based anode materials for stable sodium storage:progress and perspective[J].Advanced Materials,2022,34(7):2106895.
[5] Jing W T,Yang C C,Jiang Q.Recent progress on metallic Sn-and Sb-based anodes for sodium-ion batteries[J].Journal of Materials Chemistry A,2020,8(6):2913-2933.
[6] Pan Q G,Tong Z P,Su Y Q,et al.Energy storage mechanism,challenge and design strategies of metal sulfides for rechargeable sodium/potassium-ion batteries[J].Advanced Functional Materials,2021,31(37):2103912.
[7] Wang H G,Li W,Liu D P,et al.Flexible electrodes for sodium-ion batteries:recent progress and perspectives[J].Advanced Materials,2017,29(45):1703012.
[8] Jin T,Han Q Q,Jiao L F.Binder-free electrodes for advanced sodium-ion batteries[J].Advanced Materials,2020,32(3):1806304.
[9] Li C P,Qiu M,Li R L,et al.Electrospinning engineering enables high-performance sodium-ion batteries[J].Advanced Fiber Materials,2022,4(1):1-23.
[10] Xia J,Liu L,Jamil S,et al.Free-standing SnS/C nanofiber anodes for ultralong cycle-life lithium-ion batteries and sodium-ion batteries[J].Energy Storage Materials,2019,17:1-11.
[11] Yan H X,Yang M,Liu L,et al.Synthesis of SnS/C nanofibers membrane as self-standing anode for high-performance sodium-ion batteries by a smart process[J].Journal of Alloys and Compounds,2020,843:155899.
[12] Liu K Y,Li C,Yan L J,et al.MOFs and their derivatives as Sn-based anode materials for lithium/sodium ion batteries[J].Journal of Materials Chemistry A,2021,9(48):27234-27251.
[13] Bian Z,Li A,He R,et al.Metal-organic framework-templated porous SnO/C polyhedrons for high-performance lithium-ion batteries[J].Electrochim Acta,2018,289:389-396.
[14] Ni W,Cheng J,Shi L,et al.Integration of Sn/C yolk-shell nanostructures into free-standing conductive networks as hierarchical composite 3D electrodes and the Li-ion insertion/extraction properties in a gel-type lithium-ion battery thereof[J].Journal of Materials Chemistry A,2014,2(45):19122-19130.
[15] Zhang S,Zhao H,Wang M,et al.Low crystallinity SnS encapsulated in CNTs decorated and S-doped carbon nanofibers as excellent anode material for sodium-ion batteries[J].Electrochim Acta,2018,279:186-194.
[16] Wang Y,Zhang Y,Shi J,et al.Tin sulfide nanoparticles embedded in sulfur and nitrogen dual-doped mesoporous carbon fibers as high-performance anodes with battery-capacitive sodium storage[J].Energy Storage Materials,2019,18:366-374.
[17] Tang L,Zhang B,Peng T,et al.MoS₂/SnS@C hollow hierarchical nanotubes as superior performance anode for sodium-ion batteries[J].Nano Energy,2021,90:106568.
[18] Li X,He C,Zheng J,et al.Preparation of promising anode materials with Sn-MOF as precursors for superior lithium and sodium storage[J].Journal of Alloys and Compounds,2020,842:155605.
[19] Zhu S,Huang A,Wang Q,et al.MOF-derived porous carbon nanofibers wrapping Sn nanoparticles as flexible anodes for lithium/sodium ion batteries[J].Nanotechnology,2021,32(16):165401.
[20] Cheng Q,Yu X.Structural engineering of metal-organic framework derived tin sulfides for advanced Li/Na storage[J].Journal of Materials Chemistry A,2021,9(18):11381-11396.