碳纤维表面光滑且具有惰性,削弱了其与树脂的界面黏结,进而限制了碳织物/树脂复合材料的应用前景。基于界面工程技术,采用预埋晶种层的方式诱导ZnO微纳米阵列在碳纤维表面均匀生长,并通过改变晶种层溶度优化ZnO阵列的形貌和分布,以强化纤维/基体的界面,从而提升复合材料的力学强度和摩擦学性能。结果表明:通过对纤维表面形貌分析,晶种层浓度对ZnO微纳米阵列形貌和分布有较大的影响;当浓度为15mmol/L时,均匀且细化的ZnO阵列生长在碳纤维表面,使纤维的表面能大幅度提高,促进了树脂充分浸润,提高了力学强度;与原始复合材料相比,改性复合材料的磨损率降低了约35%,表明ZnO阵列的引入能够明显提高复合材料的耐磨性。
The application prospects of carbon fabrics (CFs)/resin composites have been limited due to the surface smooth and chemical inertia of carbon fibers,causing a weakened interface of fibers/matrix.From the view of interface engineering technology,the pre-embedded crystal seed layer was employed to induce the growth of ZnO arrays onto the surface of CFs,and the morphology and distribution of ZnO arrays were optimized via changing the solubility of the crystal seeds to strengthen the fiber/matrix interface,thereby improving the mechanical and tribological properties of the composites.The analysis of fiber surface morphology showed that the concentration of the crystal seed layer had an important effect on the morphology and distribution of the ZnO micro-nano arrays.When the concentration was 15mmol/L,the uniform and refined ZnO arrays grew onto the surface of CFs,which significantly increased the surface energy of the fibers,promoted the wetting of resin,and improved the mechanical strength.Compared with the pristine carbon fabrics composites,the wear rate of the modified composites was reduced by about 35%,indicating that the introduction of ZnO arrays could significantly improve the wear resistance of the composites.
[1] Daniel J E,Filip S,Andreas H,et al.Carbon fiber surface chemistry and its role in fiber-to-matrix adhesion[J].Journal of Materials Chemistry A,2021,9,26528-26537.
[2] 张东兴,黄龙男.聚合物基复合材料科学与工程[M].哈尔滨:哈尔滨工业大学出版社,2018,1-50.
[3] 黄春旭,陈刚,王启芬,等.碳纤维表面改性技术研究进展[J].工程塑料应用,2022,50(1):170-174.
[4] Hu J Q,Li F,Wang B,Zhang H Q,et al.A two-step combination strategy for significantly enhancing the interfacial adhesion of CF/PPS composites:the liquid-phase oxidation followed by grafting of silane coupling agent[J].Composites Part B,2020(191):107966-107972.
[5] Zhao B C,Gao H,Li S B,et al.Surface Modification of carbon fiber by electro-polymerization:continuous production,thickness control,colorization,and preparation of CFRP[J].ACS Applied Polymer Materials,2020,2:2594-2601.
[6] 谢金梦,逄显娟,黄素玲,等.碳纤维改性PEEK复合材料摩擦学性能及其应用研究进展[J].化工新型材料,2023,51(10):1-7.
[7] 宋季.碳纤维表面改性、界面粘合及金属化的研究[D].北京:北京化工大学,2020.
[8] Daniel J E,Karyn J,Anders J,et al.Improving the effects of plasma polymerization on carbon fiber using a surface modification pretreatment[J].Composites:Part A,2021,143:106319-106328.
[9] Jie F,Xiao D,Lan L,et al.Grafting methyl acrylic onto carbon fiber via Diels-Alder reaction for excellent mechanical and tribological properties of phenolic composites[J].Applied Surface Science,2018(433):349-357.
[10] 李娜,李晓屿,刘丽,等.电泳沉积氧化石墨烯的碳纤维表面改性及其增强环氧树脂复合材料界面性能[J].复合材料学报,2020,37(7):1571-1580.
[11] 唐黎明,王新楠,纪平,等.碳纳米管/丁腈橡胶复合材料力学及摩擦性能的分子动力学模拟[J].润滑与密封,2022,47(8):21-26.
[12] 曹凤香,王亚楠,吴坤尧.纳米颗粒TiO2和SiO2对碳纤维/超高分子量聚乙烯复合材料力学和摩擦学性能的影响[J].润滑与密封,2021,46(4):94-99.
[13] 刘梦博,李文彬,段理,等.水热法制备氧化锌纳米棒及微观形貌控制[J].电子元件与材料,2018,37(10):73-78.
[14] 于海瀚,谭晓冉,孙术博,等.原位组装沸石咪唑酯骨架对纸基ZnO纳米棒阵列光电性能的影响研究[J].复合材料学报,2022,40(4):2169-2175.
[15] 赵晗,尚晴,杨萌,等.ZnO纳米棒改性超高分子量聚乙烯纤维及其性能研究[J].高分子学报,2020,51(6):649-655.
[16] 费杰,黄剑锋,曹丽云,等.炭布/树脂复合摩擦材料的湿式摩擦学性能[J].复合材料学报,2013,30(3):70-75.
[17] Chen Qiang,Peng Qingyu,Zhao Xu,et al.Grafting carbon nanotubes densely on carbon fibers by poly(propylene imine for interfacial enhancement of carbon fiber composites[J].Carbon,2020,158:468-470.
[18] Xie F,Hu W J,Ning D D,et al.ZnO nanowires decoration on carbon fiber via hydrothermal synthesis for paper-based friction materials with improved friction and wear properties[J].Ceramics International,2018(44):4204-4210.
[19] 费杰,张浩,董立社,等.ZnO晶须对碳纤维增强纸基摩擦材料性能的影响[J].陕西科技大学学报(自然科学版),2017,35(1):45-49.
[20] Chang L,Jie F,Tong Z,et al.Relationship between surface characteristics and properties of fiber-reinforced resin-based composites[J].Composites Part B,2023(249):110422-110431.
基金资助
陕西省教育厅专项科研计划项目(21JK0964);陕西省自然科学基础研究计划项目(2023-JC-QN-0138);咸阳师范学院专项科研基金项目(XSYK18005);咸阳师范学院“青年骨干教师”培养项目(XSYGG201607)