化工新型材料

化工新型材料 ›› 2024, Vol. 52 ›› Issue (8) : 122-126. DOI: 10.19817/j.cnki.issn1006-3536.2024.08.015

新材料与新技术

光/热双重固化树脂的制备及性能研究

叶钦臣, 赵秋丽, 李文栋, 杨庆浩, 张冠军

作者信息 +

Preparation and performance study of light/heat dual-curing resin

Author information +

文章历史 +

Received
2023-04-18
Issue Date	Revised Date
2024-08-15	2023-04-18

PDF

摘要

以环氧丙烯酸酯和环氧树脂的混合体系作为基体树脂,加入光引发剂、活性稀释剂、高温热固化剂、促进剂,制备了体积收缩率小、固化速度快、力学性能优良的光/热双重固化树脂,研究了光固化树脂和热固化树脂质量比、热固化时间、热固化温度对光/热双重固化树脂性能的影响。结果表明,光固化树脂和热固化树脂质量比为5∶5、热固化温度为100℃、热固化时间为3h时,光/热双重固化树脂性能最佳,拉伸强度为18.82MPa,冲击强度为85.76J/m²,体积收缩率为2.48%。

Abstract

A mixed system of epoxy acrylate and epoxy resin was used as the base resin,and photoinitiators,active diluents,high-temperature heat curing agents and accelerators were added to prepare light/heat double-curing resins with small volume shrinkage,fast curing speed and excellent mechanical properties.The effects of the mass ratio of light-curing resin and heat-curing resin,heat-curing time,and heat-curing temperature on the performance of the light/heat dual-curing resins were investigated.The results showed that when the mass ratio of light-curing resin and heat-curing resin was 5∶5,the heat-curing temperature was 100℃,and the heat-curing time was 3h,the light/heat dual-curing resin had the best performance,with a tensile strength of 18.82MPa,an impact strength of 85.76J/m²,and a volume shrinkage of 2.48%.

关键词

光/热双重固化 / 环氧树脂 / 力学性能

Key words

light/heat dual-curing / epoxy resin / mechanical properties

引用本文

引用格式 ▾

叶钦臣, 赵秋丽, 李文栋, 杨庆浩, 张冠军. 光/热双重固化树脂的制备及性能研究[J]. 化工新型材料, 2024, 52(8): 122-126 DOI:10.19817/j.cnki.issn1006-3536.2024.08.015

登录浏览全文

4963

注册一个新账户忘记密码

参考文献

原文顺序 | 出版日期 | 本文引用

[1] Wang S Y,Zou Y Q.Synthesis,characterization,and UV-curing properties of silicon-containing(Meth)acrylate monomers[J].Journal of Applied Polymer Science,2013,129(6):3325-3332.
[2] Chang C W,Lu K T.Epoxy acrylate UV/PU dual-cured wood coatings[J].Journal of Applied Polymer Science,2010,115(4):2197-2202.
[3] 付文,刘安华,李建雄,等.快速光固化用阳离子光引发剂研究进展[J].热固性树脂,2012,27(5):69-73.
[4] 祝军.我国光固化材料产业发展现状及建议[J].高科技与产业化,2020(9):53-57.
[5] 李冰.集成电路制造用光刻胶发展现状及挑战[J].精细与专用化学品,2021(2):1-5.
[6] Shang W,Jiang H.Preparation and properties of a novel fluorinated epoxy resin/DGEBA blend for application in electronic materials[J].High Performance Polymers,2020,32(7):793-800.
[7] Zhang X,Chen Y,Hu J.Recent advances in the development of aerospace materials[J].Progress in Aerospace Sciences,2018,97:22-34.
[8] Yousefi N,Evans A D,Harper L T,et al.Solid epoxy resin systems for automated composite manufacturing[J].Compo-sites Part A:Applied Science and Manufacturing,2020,142:106-205.
[9] 严伟,刘振涛,刘玉飞,等.紫外光湿气双固化硅胶研究进展[J].中国胶粘剂,2020,29(6):60-64.
[10] Bao Xiaohui,Wu Fangyi,Wang Jiangbo.Fire retardancy and thermal degradation kinetics of epoxy composites containing poly aminopropyl phenylsilsesquioxane[J].Journal of Macromolecular Science,Part B,2021,60(5),381-390.
[11] Elangovan Sampandam,Tilahun Diriba Garbi,Yilak Alemu Abbo.Intermolecular interaction studies of brompheniramine with 1-propanol at 303K,308K and 313K[J].Chemistry Africa,2020,3(4):1-7.
[12] Wang Xinjie,Xu Donghang,Zhu Pinghua,et al.Effect of curing temperature on tunnel fire insulation of aerogel cement paste coatings[J].Journal of Wuhan University of Technology-Materials Science Edition,2021,36(1):93-102.