PDF
摘要
以碳点(CDs)水热合成产物为发泡剂,经原位发泡制备碳点/聚氨酯泡沫(CDs/PUF)复合材料。通过对泡沫微观结构表征及宏观性能的测试分析,研究不同含量CDs溶液对发泡过程、泡沫结构及性能的影响。结果表明:CDs与聚氨酯泡沫基体通过化学键结合,扰乱了大分子链的有序排列,加速了发泡过程中的凝胶反应,同时CDs作为异相成核剂,增加了单位体积内的泡孔数量,孔径分布均匀,泡孔结构完整性增强,孔壁厚度增加,开孔率降低;复合材料压缩强度最大提高113%,耐热性能得到改善。CDs在复合材料中分散良好,荧光特性得以很好地保留,随着CDs含量增加,复合材料荧光强度增强,绝对荧光量子产率最高达19.92%。
Abstract
Carbon dots/polyurethane foam (CDs/PUF) composites were prepared by in-situ foaming using hydrothermally synthesized product of CDs as the foaming agent.The effects of different mass concentrations of the CDs solution on the foaming process,the structure and properties of CDs/PUF composites were studied through the microstructure characterization and the macroscopic performance analysis.The results showed that CDs were incorporated into polyurethane foam matrix via chemical bonding,which disrupted the order of macromolecular chains,and accelerated the gel reaction during the foaming process.At the same time,as a heterogeneous nucleating agent,the CDs increased the bubble the number of pores per unit volume,uniformed the pore size distribution,enhanced the integrity of pore structure,increased the thickness of the bubble walls,and decreased the opening pore rate.The compressive strength of the CDs/PUF composite was maximally increased by 113%,and the heat resistance was improved.CDs/PUF composites retained the initial fluorescence of the CDs,and the CDs were dispersed well in the composites.With the increase of CDs content,the fluorescence intensity of the composites became stronger,and the absolute fluorescence quantum yield was as high as 19.92%.
关键词
聚氨酯泡沫
/
碳点
/
复合材料
/
荧光
Key words
polyurethane foam
/
carbon dots
/
composite materials
/
fluorescence
碳点/聚氨酯泡沫复合材料的制备及性能研究[J].
化工新型材料, 2024, 52(7): 63-68 DOI:10.19817/j.cnki.issn1006-3536.2024.07.003
[1] Su Yan,Zhang Dan,Jia Peng,et al.Highly selective and sensitive long fluorescence lifetime polyurethane foam sensor based on Tb-complex as chromophore for the detection of H2PO4-in water[J].Spectrochimica Acta Part A:Molecular and Biomolecular Spectroscopy,2019,217:86-92.
[2] Lim H,Kim E Y,Kim B K.Polyurethane foams blown with various types of environmentally friendly blowing agents[J].Plastics,Rubber and Composites,2010,39(8):364-369.
[3] Benjatham S,Duangruthai S,Nuanphun C.Fully water-blown polyisocyanurate-polyurethane foams with improved mechanical properties prepared from aqueous solution of gelling/blowing and trimerization catalysts[J].E-Polymers,2019,19(1):277-289.
[4] Mercedes S C,Josías T M,Jens C R,et al.Evaluation of the thermal conductivity and mechanical properties of water blown polyurethane rigid foams reinforced with carbon nanofibers[J].European Polymer Journal,2018,108:98-106.
[5] Qin Z X,Wen M,Bai J,et al.Silica-coupled carbon nanodots:multicolor fluorescence governed by the surface structure for fingerprint recognition and WLED devices[J].New J Chem,2021,45:11596.
[6] Liu C,Li H Y,Cheng R,et al.Facile synthesis,high fluorescence and flame retardancy of carbon dots[J].Journal of Materials Science & Technology,2022,104:163-171.
[7] Ren W J,Bai J J,Zhao Y L,et al.One-pot synthesis of carbon dots co-doped with N and S:high quantum yield governed by molecular state and fluorescence detection of Ag+[J].Mole-cular Physics,2019,117:1-11.
[8] 孔迪.纳米碳/聚氨酯复合材料的制备及性能研究[D].北京:北京化工大学,2018.
[9] Zhen T,Di L,Elena V U,et al.Multilevel data encryption using thermal-treatment controlled room temperature phosphorescence of carbon dot/polyvinylacohol composites[J].Advanced Science,2018,9(5):1800795.
[10] Qin Z X,Wang W H,Wen M,et al.Multicolor emissive sulfur,nitrogen co-doped carbon dots and their application in ion detection and solid lighting[J].Spectrochimica Acta Part A:Molecular and Biomolecular Spectroscopy,2020,229:117859.
[11] Kang J W,Kim J M,Kim M S,et al.Effects of nucleating agents on the morphological,mechanical and thermal insulating properties of rigid polyurethane foams[J].Macromolecular Research,2009,17(11):856-862.
[12] 郑梓璇,王德刚,梁国杰,等.聚氨酯泡沫浸渍酚醛树脂溶液制备炭泡沫隔热材料研究[J].材料导报,2022,36(7):21060034.
[13] 谷松涛.TPU结构泡沫夹芯板的制备及性能研究[D].郑州:河南工业大学,2018.
[14] 段伊静.生物质基聚氨酯的合成与性能研究[D].北京:北京化工大学,2018.
[15] Bai J,Ren W,Wang Y,et al.High performance thermoplastic polyurethane elastomer/carbon dots bulk nanocomposites with strong luminescence[J].High Performance Polymers,2020,32(7):857-867.
基金资助
国家级大学生创新创业训练项目(202314101015,202314101020);山西省基础研究计划(自由探索类)资助项目(202203021212332);山西省高等学校大学生创新创业训练计划项目(20221177);太原工业学院引进人才科研资助项目(2022KJ029);太原工业学院青年学科带头人支持计划资助
