随着风机叶片报废数量的不断增加以及对资源节约和环境保护的重视,风机叶片热固性复合材料的回收再利用越来越受到重视。概述了主要的回收技术并分析其优缺点。旨在为新能源行业新兴固体废物循环利用和消纳体系建设提供决策依据,促进风电行业绿色可持续发展。
With the increasing number of scraped wind turbine blades and the emphasis on resource conservation and environmental protection,the recycling of thermoset composite materials for wind turbine blades is receiving more and more attention.This paper outlined the main recycling technologies and analyzed their advantages and disadvantages.It aimed to provide a decision-making basis for the construction of the emerging solid waste recycling and consumption system in the new energy industry,and to promote the green and sustainable development of the wind power industry.
[1] 马文静,张宇彤,杨春振,等.大宗风电退役风机叶片资源化回收利用技术研究进展[J].洁净煤技术,2023,29(10):17-26.
[2] 郭子炘.大型风机叶片雷击接闪的极性效应与风险评估方法[D].北京:华北电力大学(北京),2020.
[3] Global Wind Energy Council(GWEC).Global wind report:annual market update 2019[R].Brussels,Belgium:GWEC,2020.
[4] 中国可再生能源学会风能专业委员会.2020年中国风电吊装容量统计简报[J].风能,2021(11):72-84.
[5] 于雪梅,朱晓华,刘卫生,等.废弃风电叶片切割装置设计及破碎料的应用[J].工程塑料应用,2018,46(6):60-64.
[6] 陈天啸.风力发电叶片回收技术及发展展望[J].玻璃纤维,2022(6):30-36.
[7] 万佳,钟智丽,张肖,等.纤维增强树脂基复合材料在风机叶片的应用研究[J].纺织科技进展,2018(1):6-8.
[8] 刘庆,聂忆华,龙雷翔,等.废风机叶片材料回收再利用现状及前景分析[J].广东建材,2022,38(4):22-24.
[9] Ding A,Li S,Wang J,et al.A new analytical solution for spring-in of curved composite parts[J].Composites Science & Technology,2017,142:30-40.
[10] 许仁辞.退役风机叶片回收利用技术方法分析[J].内蒙古电力技术,2022,40(5):34-38.
[11] 郑进,张庆华,罗振寰,等.风电叶片防护涂层材料的研究进展[J].高分子材料科学与工程,2012,28(11):182-186.
[12] Beauson J,Madsen B,Toncelli C,et al.Recycling of shredded composites from wind turbine blades in new thermoset polymer composites[J].Composites Part A Applied Science & Manufacturing,2016,90:390-399.
[13] Kouparitsas C E,Kartalis C N,Varelidis P C,et al.Recycling of the fibrous fraction of reinforced thermoset composites[J].Polymer Composites,2002,23(4):682-689.
[14] Ribeiro M C S,Meira-Castro A C,Silva F G,et al.Re-use assessment of thermoset composite wastes as aggregate and filler replacement for concrete-polymer composite materials:a case study regarding GFRP pultrusion wastes[J].Resources Conservation and Recycling,2015,104(7):417-426.
[15] Palmer J,Ghita O R,Savage L,et al.Successful closed-loop recycling of thermoset composites[J].Composites Part A Applied Science & Manufacturing,2009,40(4):490-498.
[16] Feih S,Boiocchi E,Mathys G,et al.Mechanical properties of thermally-treated and recycled glass fibres[J].Composites Part B Engineering,2011,42(3):350-358.
[17] Akesson D,Foltynowicz Z,Christeen J,et al.Microwave pyrolysis as a method of recycling glass fibre from used blades of wind turbines[J].Journal of Reinforced Plastics & Composites,2012,31(17):1136-1142.
[18] Yun Y M,Seo M W,Koo G H,et al.Pyrolysis characteristics of GFRP (glass fiber reinforced plastic) under non-isothermal conditions[J].Fuel,2014,137:321-327.
[19] Torres A,Marco I D,Caballero B M.Recycling by pyrolysis of thermoset composites:characteristics of the liquid and gaseous fuels obtained[J].Fuel,2000,79(8):897-902.
[20] Sun Z,Shen Z,Ma S,et al.Sound absorption application of fiberglass recycled from waste printed circuit boards[J].Materials & Structures,2015,48(1-2):387-392.
[21] Chen J N A.Recycling and reuse of composite materials for wind turbine blades:an overview[J].Journal of Reinforced Plastics and Composites,2019,38(12):567-577.
[22] Guo Q,Yue X,Wang M,et al.Pyrolysis of scrap printed circuit board plastic particles in a fluidized bed[J].Powder Technology,2010,198(3):422-428.
[23] Rani M,Choudhary P,Krishnan V,et al.A review on recycling and reuse methods for carbon fiber/glass fiber composites waste from wind turbine blades[J].Composites,Part B.Engineering,2021:215.
[24] Fonte R,Xydis G.Wind turbine blade recycling:an evaluation of the European market potential for recycled composite materials[J].Journal of Environmental Management,2021,287(17):112269.
[25] Mattsson C,André A,Juntikka M,et al.Chemical recycling of end-of-life wind turbine blades by solvolysis/HTL[J].IOP Conference Series Materials Science and Engineering,2020,942:012013.
基金资助
山西省自然科学研究面上项目(20210302123071);国家重点研发计划项目(2018YFB1502804)
PDF
