钴酸锂(LCO)作为锂电池正极材料,在电子产品领域有非常广泛的应用,但由于高电压下会导致其晶相的不可逆相变从而导致循环稳定性降低,因此如何提高钴酸锂在高电压下的电化学稳定性一直是研究热点。为了改善钴酸锂的电化学稳定性,采用固相球磨-烧结法合成了Al-Mg共掺杂的LCO材料。采用X射线衍射(XRD)和扫描电镜(SEM)及电化学性能测试表征晶体结构、形貌和测量其循环稳定性。结果表明:Mg、Al进入钴酸锂晶格内部后有效地提高了其电化学稳定性,当Al掺杂量为0.1%,Mg掺杂量为1%时,在0.5C的倍率,3～4.5V的电压下,首圈放电比容量可达136.7mAh/g,100圈后的容量保持率可达76.2%,同时也表现出了良好的倍率性能。
Lithium cobalt oxide (LCO),as a cathode material for lithium batteries,has a very wide range of applications in the field of electronic products,but how to improve the electrochemical stability of LCO at high voltage has been a research hotspot because high voltage can lead to the irreversible phase transition of its crystalline phase and thus lead to the reduction of cycling stability.In order to improve the electrochemical stability of LCO,Al-Mg co-doped LCO material was synthesized by solid-phase ball-milling-sintering method.X-ray diffraction (XRD) and scanning electron microscopy (SEM) as well as electrochemical property tests were used to characterize the crystal structure,morphology and measure its cycling stability.The results showed that the entry of Mg and Al into the interior of the LCO lattice effectively improved its electrochemical stability.When the Al doping amount was 0.1% and the Mg doping amount was 1%,the specific capacity of the first cycle discharge could reach 136.7mAh/g at a multiplicity of 0.5C and a voltage of 3～4.5V.The capacity retention after 100 cycles remained at 76.2%,and it also exhibited a good multiplicity performance.
[1] Voronina Natalia,Sun Yang-Kook,Myung Seung-Taek.Co-free layered cathode materials for high energy density lithium-ion batteries[J].ACS Energy Letters,2020,5(6):1814-1821.
[2] Yang Gene Jaehyoung,Kim Yongseon.Electrochemical properties of Mg-added lithium nickel cobalt oxide induced by structural characteristics depending on the synthetic process[J].Ceramics International,2018,44(2):2199-2203.
[3] Yoon Moonsu,Dong Yanhao,Yoo Youngbin,et al.Unveiling nickel chemistry in stabilizing high-voltage cobalt-rich cathodes for lithium-ion batteries[J].Chemicals & Chemistry,2019,30(6):1-10.
[4] Lyu Yingchun,Wu Xia,Wang Kai,et al.An overview on the advances of LiCoO2 cathodes for lithium-ion batteries[J].Advanced Energy Materials,2020,11:1-28.
[5] 夏立爽,谢召军,沈恋,等.LiCoO2:获诺贝尔奖的锂离子电池正极材料还有多少潜力[J].电源技术,2020,44(10):1401-1406.
[6] Wu Qian,Zhang Bing,Lu Yingying.Progress and perspective of high-voltage lithium cobalt oxide in lithium-ion batteries[J].Journal of Energy Chemistry,2022,74:284-304.
[7] Myung S T,Kumagai N,Komaba S,et al.Effects of Al doping on the microstructure of LiCoO2 cathode materials[J].Solid State lonics,2001,139(1/2):47-56.
[8] Liu Qi,Su Xin,Lei Dan,et al.Approaching the capacity limit of lithium cobalt oxide in lithium ion batteries via lanthanum and aluminium doping[J].Nature Energy,2018,3(11):936-943.
[9] Levasseur S,Ménétrier M,Delmas C.On the LixCo1-yMgyO2 system upon deintercalation:electrochemical,electronic properties and 7Li MAS NMR studies[J].Journal of Power Sources,2002,14:3584.
[10] Mladenov M,Stoyanova R,Zhecheva E,et al.Effect of Mg doping and MgO-surface modification on the cycling stability of LiCoO2 electrodes[J].Electrochemistry Communications,2001,3(8):410-416.
[11] Zhang Jienan,Li Qinghao,Ouyang Chuying,et al.Trace doping of multiple elements enables stable battery cycling of LiCoO2 at 4.6V[J].Nature Energy,2019,4(7):594-603.
[12] Zhu Xiaoming,Shang Kehui,Jiang Xiaoyu,et al.Enhanced electrochemical performance of Mg-doped LiCoO2 synthesized by a polymer-pyrolysis method[J].Ceramics International,2014,40(7):11245-11249.
[13] MacNeil D D,Dahn J R.The reactions of Li0.5CoO2 with nonaqueous solvents at elevated 556 temperatures[J].Journal of The Electrochemical Society,2002,149:A912-A919.
[14] Doh C H,Kim D H,Kim H S,et al.Thermal and electrochemical behaviour of C/LixCoO2 cell during safety test[J].J Power Sources,2008,175(1):881-885.
[15] Zhang Meiling,Tan Ming,Zhao Hongyuan,et al.Enhanced high-voltage cycling stability and rate capability of magnesium and titanium co-doped lithium cobalt oxides for lithium-ion batteries[J].Applied Surface Science,2018,458(15):111-118.
[16] Kumar Aniket,Jadon Jitendra Kumar Singh,Ali Hamid,et al.An overview of lithium ion battery and its composition[J].ACADEMICIA:an International Multidisciplinary Research Journal,2021,11(10):165-172.
[17] Sun Zhengyao,Zhang Zehao,Li Haibo.Templated synthesis of nano-LiCoO2 cathode for lithium-ion batteries with enhanced rate capability[J].Materials Letters,2021,303:130570.
[18] Whittingham M S.Lithium batteries and cathode materials[J].Chemical Reviews,2004,104:4271-4301.
[19] Yu Zhaozhe,Tong Qilin,Zhao Guiquan,et al.Combining surface holistic Ge coating and subsurface Mg doping to enhance the electrochemical performance of LiNi0.8Co0.1Mn0.1O2 cathodes[J].ACS Applied Materials & Interfaces,2022,14:25490-25500.
基金资助
2020年天山青年计划(2020Q003);新疆特色纺织材料的开发与应用创新团队项目(2017D14002)
PDF
