水性环氧乳液/海泡石复合改性苯丙乳液涂层粘结性能研究

何丽红1,2, 李青林1,2, 徐心硕3, 周超1,2, 李斯1,2

化工新型材料 ›› 2024, Vol. 52 ›› Issue (1) : 203 -206.

PDF
化工新型材料 ›› 2024, Vol. 52 ›› Issue (1) : 203-206. DOI: 10.19817/j.cnki.issn1006-3536.2024.01.015
科学研究

水性环氧乳液/海泡石复合改性苯丙乳液涂层粘结性能研究

    何丽红1,2, 李青林1,2, 徐心硕3, 周超1,2, 李斯1,2
作者信息 +

Bonding performance of waterborne epoxy emulsion/sepiolite composite modified styrene-acrylic emulsion coating

  • He Lihong1,2, Li Qinglin1,2, Xu Xinshuo3, Zhou Chao1,2, Li Si1,2
Author information +
文章历史 +
PDF

摘要

采用物理共混法制备水性环氧乳液/海泡石复合改性苯丙乳液涂层,探讨了苯丙-水性环氧乳液配比,三乙醇胺、填料及乳化沥青掺量对涂层粘结强度的影响,同时考察了复合涂层的抗渗性和耐高低温性。结果表明,当苯丙乳液与水性环氧乳液的有效质量比为1∶2,三乙醇胺、海泡石和乳化沥青掺量分别为2%、3%、5%时,复合涂层粘结强度为3.54MPa,与钢板间具有较好的相容性,且不透水性和耐高低温性优良。

Abstract

Waterborne epoxy emulsion/sepiolite composite modified styrene-acrylic emulsion coating was prepared by physical blending method.The effects of styrene-acrylic-waterborne epoxy emulsion ratio,triethanolamine,filler and emulsified asphalt content on the bonding strength of the coating were investigated.At the same time,the impermeability and high and low temperature resistance of the composite coating were examined.The results showed that when the effective mass ratio of styrene-acrylic emulsion to waterborne epoxy emulsion was 1∶2,and the content of triethanolamine,sepiolite and emulsified asphalt were 2%,3% and 5%,respectively,the bonding strength of the prepared composite coating reached 3.54MPa.It exhibited good compatibility with the steel plate,and had excellent impermeability and high and low temperature resistance.

关键词

苯丙乳液 / 水性环氧树脂 / 共混改性 / 粘结强度 / 影响因素

Key words

styrene-acrylic emulsion / waterborne epoxy resin / blending modification / bonding strength / influencing factors

引用本文

引用格式 ▾
水性环氧乳液/海泡石复合改性苯丙乳液涂层粘结性能研究[J]. 化工新型材料, 2024, 52(1): 203-206 DOI:10.19817/j.cnki.issn1006-3536.2024.01.015

登录浏览全文

4963

注册一个新账户 忘记密码

参考文献

[1] 梁楚欣,刘峥,张淑芬.水性防腐蚀涂料的改性及其防腐蚀性能研究进展[J].材料保护,2019,52(7):135-141,148.
[2] 汤朋,刘兰轩,曹东萍,等.有机涂层附着机理及附着力提高方法综述[J].材料保护,2020,53(2):126-135.
[3] 田志强,束俊杰,郭蓓,等.水性可剥涂料研究进展[J].材料保护,2021,54(9):133-137.
[4] 彭军,杜柱康,张习文.环氧树脂水性化技术和改性方法的研究进展[J].化工新型材料,2021,49(10):236-239.
[5] 王升文.苯丙复合水性防腐涂料的制备与性能研究[J].塑料工业,2021,49(2):46-48,127.
[6] Li S X,Wang J P,Qu W J,et al.Green synthesis and properties of an epoxy-modified oxidized starch-grafted styrene-acrylate emulsion[J].European Polymer Journal,2020,123:109412.
[7] 夏宇正,吴礼鹏,石淑先,等.苯丙乳液聚合中的结构凝胶生成与控制[J].涂料工业,2013,43(10):1-6.
[8] 乌良汉,黄训文,王尉,等.苯丙/环氧改性丙烯酸水性防锈涂料的制备与表征[J].材料保护,2018,51(11):94-97.
[9] Haramagatti C R,Naikwadi A T.Factors influencing the emulsion polymerization of clay-platelet-assisted styrene-acrylic copolymer latexes[J].Journal of Coatings Technology and Research,2021,18(5):1345-1352.
[10] 程秀莲,贾秀红,霸书红.用于双氰胺环氧树脂固化体系促进剂的研究[J].粘接,2019,40(2):32-35.

基金资助

重庆市教委科学技术重点研究项目(KJZD-K202200701);重庆交通大学研究生科研创新项目(2021S0052)

AI Summary AI Mindmap
PDF

639

访问

0

被引

导航
相关文章

AI思维导图

/