等离子体处理对国产高强碳纤维复合材料界面性能影响研究

熊舒1, 肇研2, 柳肇博2

化工新型材料 ›› 2023, Vol. 51 ›› Issue (8) : 114 -118.

PDF
化工新型材料 ›› 2023, Vol. 51 ›› Issue (8) : 114-118. DOI: 10.19817/j.cnki.issn1006-3536.2023.08.022
新材料与新技术

等离子体处理对国产高强碳纤维复合材料界面性能影响研究

    熊舒1, 肇研2, 柳肇博2
作者信息 +

Effect of plasma treatment on the interfacial properties of domestic high strength carbon fiber composites

  • Xiong Shu1, Zhao Yan2, Liu Zhaobo2
Author information +
文章历史 +
PDF

摘要

在100W功率条件下,用氧等离子体对国产T800级碳纤维进行处理,通过扫描电子显微镜,原子力显微镜,X射线光电子能谱、单丝拉伸强度测试等方法对处理前后碳纤维表面物理化学特性进行表征,采用微脱粘方式研究了等离子体处理前后碳纤维环氧树脂复合材料界面的结合性能。结果表明:等离子体处理使碳纤维表面发生明显刻蚀,显著地提高了其表面化学活性;处理时间为3min时,碳纤维力学性能未发生降低,而其复合材料界面剪切强度值(IFSS)可达最高的88.61MPa,相比于未处理碳纤维复合材料而言,IFSS增幅为97.39%。

Abstract

The surface of domestic T800 grade carbon fibers were treated by oxygen plasma under 100W powercondition.The physical and chemical properties of carbon fibers before and after treatment were characterized byscanning electron microscope(SEM) , atomic force microscope(AFM) , X-ray photoelectron spectroscopy (XPS), singlefiber tensile strength test.etc.The bonding properties of carbon fiber epoxy resin composite interface before and afterplasma treatment were studied by the Micro-droplet debonding test.The results showed that the surface of domesticcarbon fibers was obviously etched by plasma treatment, and the surface chemical activity was significantly improved.The mechanical properties of carbon fiber were not reduced when treated for 3min, however the interfacial shearstrength(IFSs) of composite reached to the highest value of 88.61MPa.Compared with untreated carbon fibercomposites , the IFSS increased by 97.39%.

关键词

碳纤维 / 等离子体处理 / 复合材料 / 界面性能

Key words

carbon fiber / plasma treatment / composite / interfacial property

引用本文

引用格式 ▾
等离子体处理对国产高强碳纤维复合材料界面性能影响研究[J]. 化工新型材料, 2023, 51(8): 114-118 DOI:10.19817/j.cnki.issn1006-3536.2023.08.022

登录浏览全文

4963

注册一个新账户 忘记密码

参考文献

[1] Novoselov K S,Jiang Z,Zhang Y,et al.Room-temperature quantum hall effect in graphene[J].Science,2007,315(5817):1379.
[2] 赵鑫.石墨烯量子点的制备及其在Hg2+检测中的应用[D].大连:大连理工大学,2015.
[3] 李鑫.尺寸、形状相关的石墨烯量子点电子结构[D].昆明:云南师范大学,2016.
[4] 陈娇.石墨烯量子点的制备及生物应用[D].南京:南京大学,2016.
[5] 李碧桐.柠檬酸热解法制备石墨烯量子点及其光学性能研究[D].昆明:云南大学,2015.
[6] 韩永芹,丁兵,张校刚.氧化石墨/聚吡咯复合材料的制备及其电化学性质[J].科学通报,2011,56(23):1927-1933.
[7] 赵妍.石墨烯量子点的高效制备及荧光性能调控[D].长春:长春理工大学,2015.
[8] 卢瑞瑞,刘易斯,刘鹏,等.石墨烯量子点的制备、表征与应用研究[J].炭素技术,2014,33(3):1-5.
[9] 张庆.石墨烯量子点的可控制备及其在光电器件中的应用[D].兰州:兰州大学,2015.
[10] 袁点.氧化石墨烯还原制备石墨烯的方法研究[J].中国材料科技与设备,2012,8(4):36-39.
[11] 郝亚楠.石墨烯量子点、氮掺杂石墨烯量子点的制备及性能研究[D].西安:西北大学,2015.
[12] 肖淑华,沈明,朱沛英,等.水合肼还原氧化石墨烯的研究[J].材料开发与应用,2011,26(2):45-50.
[13] 王娇娇,冯苗,詹红兵.石墨烯量子点的制备[J].化学进展,2013,25(1):36-39.
AI Summary AI Mindmap
PDF

761

访问

0

被引

导航
相关文章

AI思维导图

/