聚酰亚胺复合材料是一种常见的摩擦材料, 具有良好的抗磨减摩性能。通过总结近几十年来聚酰亚胺复合材料的摩擦学性能的研究情况, 综述纤维、晶须、固体润滑剂、纳米材料填充改性、聚合物共混的改性方法, 分析并讨论不同改性方法对聚酰亚胺复合材料摩擦学性能的影响。指出对于聚酰亚胺摩擦学研究所面临的问题, 并展望未来聚酰亚胺复合材料在摩擦磨损方面的发展方向。
Polyimide composite material is a common friction material with good anti-wear and friction-reducing properties.The research progress on the tribological properties of polyimide composites in recent decades was summarized.The modification methods were reviewed, including fiber, whisker, solid lubricant, nanomaterial fillers modification and polymer blending.The effects of different modification methods on the tribological properties of polyimide composites were also discussed.The problems faced in the tribology research of polyimide were pointed out, and the future development direction of polyimide composites in terms of friction and wear was prospected.
[1] Liaw D J,Wang K L,Huang Y C,et al.Advanced polyimide materials:syntheses,physical properties and applications[J].Progress in Polymer Science,2012,37(7):907-974.
[2] 胡超,齐慧敏.聚酰亚胺复合材料摩擦学研究进展[J].淮阴工学院学报,2019,28(1):15-19,96.
[3] 何长昭,王文东,邹华.耐高温聚合物基自润滑轴承材料的摩擦学研究进展[J].化工新型材料,2020,48(5):37-41.
[4] Ke H,Zhao L,Zhang X,et al.Performance of high-temperature thermosetting polyimide composites modified with thermoplastic polyimide[J].Polymer Testing,2020,90:106746.
[5] Fusaro R L.Effect of atmosphere and temperature on wear,friction,and transfer of polyimide films[J].ASLE Transactions,1978,21(2):125-133.
[6] Jia J H,Zhou H D,Gao S Q,et al.A comparative investigation of the friction and wear behavior of polyimide composites under dry sliding and water-lubricated condition[J].Materials Science and Engineering:A,2003,356(1-2):48-53.
[7] Zhao G,Hussainova I,Antonov M,et al.Effect of temperature on sliding and erosive wear of fiber reinforced polyimide hybrids[J].Tribology International,2015,82:525-533.
[8] Tiwari S,Bijwe J.Surface treatment of carbon fibers-a review[J].Procedia Technology,2014,14:505-512.
[9] Zhang X,Pei X,Wang Q.The tribological properties of acid- and diamine-modified carbon fiber reinforced polyimide composites[J].Materials Chemistry and Physics,2009,115(2-3):825-830.
[10] Li J,Cheng X H.Friction and wear properties of surface-treated carbon fiber-reinforced thermoplastic polyimide composites under oil-lubricated condition[J].Materials Chemistry and Physics,2008,108(1):67-72.
[11] Li J.The effect of surface modification with nitric acid on the mechanical and tribological properties of carbon fiber-reinforced thermoplastic polyimide composite[J].Surface and Interface Analysis,2009,41(9):759-763.
[12] Li J.Tribological properties of polyimide composites filled with glass fibre and graphite[J].Plastics,Rubber and Composites,2013,38(6):248-252.
[13] Zhao G,Hussainova I,Antonov M,et al.Friction and wear of fiber reinforced polyimide composites[J].Wear,2013,301(1-2):122-129.
[14] Chen J,Jia J,Zhou H,et al.Tribological behavior of short-fiber-reinforced polyimide composites under dry-sliding and water-lubricated conditions[J].Journal of Applied Polymer Science,2008,107(2):788-796.
[15] Qiu Zixue,He Feifeng.Polyimide composites reinforced with Whiskers[J].High Performance Polymers,2001,13(2):S343-S350.
[16] Zhu J,Shi Y,Feng X.Tribological and mechanical properties of polyimide composites filled with OTS self-assembled monolayers treated potassium titanate Whiskers[C].Kyushu,Japan:Asian-Australasian Association for Composite Materials Meeting,2008.
[17] Menezes P L,Rohatgi P K,Omrani E.Self-lubricating composites[M].Berlin:Springer Berlin Heidelberg,2018,155-180.
[18] Braun O M,Peyrard M.Friction in a solid lubricant film[J].Physical Review E-Statistical,Nonlinear,and Soft Matter Physics,2001,63:046110.
[19] Samy O,Zeng S,Birowosuto M D,et al.A review on MoS2 properties,synthesis,sensing applications and challenges[J].Crystals,2021,11(4):355.
[20] Bai J,Song J,Wei J.Tribological and mechanical properties of MoS2 enhanced polyamide 12 for selective laser sintering[J].Journal of Materials Processing Technology,2019,264:382-388.
[21] 朱敏,张招柱,王坤.二硫化钼填充聚酰亚胺复合材料的摩擦学性能[J].高分子材料科学与工程,2005,21(5):232-234,238.
[22] Pu Y P,Lu G S,Li X J,et al.Tribological property of polyimide porous materials[J].Journal of Beijing Institute of Technology,2006,15(4):483-487.
[23] 浦玉萍,吕广庶.模压聚酰亚胺多孔体材料性能的研究[J].北京理工大学学报,2003,23(3):389-393.
[24] 黄丽坚,杨长城,王晓东,等,聚酰亚胺复合材料与不同金属间干滑动时的摩擦学性能[J].机械工程材料,2009,33(10):57-59,82.
[25] 杨睿,苏正涛.石墨粒径对聚酰亚胺摩擦性能的影响[J].中国塑料,2018,32(4):45-50.
[26] 杨睿,苏正涛,李红波,等,石墨的取向对聚酰亚胺摩擦性能的影响[J].中国塑料,2020,34(5):21-25.
[27] Hsueh H B,Chen C Y.Preparation and properties of LDHs/polyimide nanocomposites[J].Polymer,2003,44(4):1151-1161.
[28] Agag T,Koga T,Takeichi T.Studies on thermal and mechanical properties of polyimide-clay nanocomposites[J].Polymer,2001,42(8):3399-3408.
[29] Cheng T,Lv G,Li Y,et al.Low dielectric polyimide/fluorinated ethylene propylene (PI/FEP) nanocomposite film for high-frequency flexible circuit board application[J].Macromolecular Materials and Engineering,2021,306(7):2100086.
[30] Cai H,Yan F,Xue Q,et al.Investigation of tribological properties of Al2O3-polyimide nanocomposites[J].Polymer Testing,2003,22(8):875-882.
[31] Liu H,Wang T,Wang Q.In situ synthesis and properties of PMR PI/SiO2 nanocomposites[J].Journal of Applied Polymer Science,2012,125(1):488-493.
[32] Shi Y,Mu L,Feng X,et al.The tribological behavior of nanometer and micrometer TiO2 particle-filled polytetrafluoroethylene/polyimide[J].Materials & Design,2011,32(2):964-970.
[33] Fu Y F,Li J,Zhang F Q,et al.The preparation and the friction and wear behaviours of TiO2/CNT/PI composite film[J].Journal of Experimental Nanoscience,2016,11(6):459-469.
[34] Chandramohan A,Nagendiran S,Alagar M.Synthesis and characterization of polyhedral oligomeric silsesquioxane-siloxane-modified polyimide hybrid nanocomposites[J].Journal of Composite Materials,2012,46(7):773-781.
[35] Huang J C,He C B,Xiao Y,et al.Polyimide/POSS nanocomposites:interfacial interaction,thermal properties and mechanical properties[J].Polymer,2003,44(16):4491-4499.
[36] 尹宇航,赵盖,宋敬伏,等.多组分协同改性聚酰亚胺复合材料的高温摩擦学性能[J].复合材料学报,2021,39(12):5699-5710.
[37] 吴小军,刘西强,占克军,等.聚酰亚胺共混和复合改性的研究进展[J].工程塑料应用,2009,37(2):76-79.
[38] 黄丽,徐定宇,程红原.聚酰亚胺/聚四氟乙烯合金共混工艺的研究[J].高分子材料科学与工程,1999,15(3):81-84.
[39] Chen S,Li J,Wei L,et al.Tribological properties of polyimide-modified UHMWPE for bushing materials of seawater lubricated sliding bearings[J].Tribology International,2017,115:470-476.
[40] Chen S,Li J,Jin Y,et al.Fabrication of polyimide-modified UHMWPE composites and enhancement effect on tribological properties[J].Polymer-Plastics Technology and Engineering,2017,57(7):700-707.
[41] Chang Q,Zhao H,He R.The addition of clay on the mechanical properties of surface-treated CF-filled PA66 composites[J].Surface and Interface Analysis,2017,49(9):837-842.
[42] Liu X Q,Zhan K J,Wu X J,et al.Studies on the blends of polyamide66 and thermoplastic polyimide[J].Journal of Macromolecular Science,Part B,2010,49(4):629-639.
基金资助
国家自然科学基金(52105181和92266205);河南省自然科学基金项目(202300410141);河南省高校国家级大学生创新创业训练计划项目(202210464028);河南科技大学大学生研究训练计划项目(2022183)
PDF
