化工新型材料

化工新型材料 ›› 2023, Vol. 51 ›› Issue (2) : 91-95. DOI: 10.19817/j.cnki.issn1006-3536.2023.02.019

新材料与新技术

耐水型SrAl₂O₄∶(Eu²⁺,Dy³⁺)发光材料制备及性能测试

^1,2*

作者信息 +

Preparation and properties of water-resistant SrAl₂O₄∶(Eu²⁺,Dy³⁺) luminescence materials

Hu Liqun^1,2, Zhao Lisha¹, Yang Zheng¹

Author information +

文章历史 +

Received		Published
2021-10-22		2023-02-20
Issue Date	Revised Date
2023-03-01	2021-10-22

PDF

摘要

采用硅烷偶联剂对SrAl₂O₄∶(Eu²⁺,Dy³⁺)发光材料进行耐水性表面包覆,比较不同包覆材料及用量下包覆效果的差异,并通过耐水性实验、余辉性能实验、超景深显微镜、扫描电镜、X射线衍射仪等手段对包覆前后的发光材料进行微观观察及表征,研究改性前后材料性能、表面形貌与成分的差异。结果表明,当以KH560为偶联剂、包覆比为9%(wt,质量分数)时,硅烷偶联剂能均匀地包覆在长余辉发光粉表面,可有效提高材料的耐水性能,同时发光材料的发光性能未受影响。

Abstract

The surface of the luminescence phosphor SrAl₂O₄∶(Eu²⁺,Dy³⁺) was coated with silane coupling agents.The optimum process parameters were determined by controlling the type and the dosage of modifiers.The characterization,properties,surface morphology and compositions of the luminescent materials before and after coating were investigated by water resistance experiments,afterglow performance experiments,super depth-of-field microscopy,scanning electron microscopy,X-ray diffractometer,etc.The results showed that,when KH560 was used as the coupling agent and the coating ratio was 9% (mass fraction),the surface of the phosphors was evenly coated by the coupling agent and the water resistance was enhanced greatly compared with the sample without coating.At the same time,their luminescent performance was not obviously affected.

关键词

发光粉 / 表面包覆 / 耐水性 / 余晖时间 / 发光涂料

Key words

phosphor / surface coated / water-resistance / afterglowtime / luminescent paint

引用本文

引用格式 ▾

耐水型SrAl₂O₄∶(Eu²⁺,Dy³⁺)发光材料制备及性能测试[J]. 化工新型材料, 2023, 51(2): 91-95 DOI:10.19817/j.cnki.issn1006-3536.2023.02.019

登录浏览全文

4963

注册一个新账户忘记密码

参考文献

原文顺序 | 出版日期 | 本文引用

[1] 罗勇悦,彭蕾蕾,淡宜.硅铝二元膜包覆稀土发光材料的结构及耐水性能的研究[J].无机材料学报,2007,22(3):499-503.
[2] 张永威,魏新,朱亚楠.稀土铝酸锶/PET复合材料的制备及性能[J].塑料,2021,50(3):1-5.
[3] 沈修宇,朱亚楠,葛明桥.SrAl₂O₄∶(Eu²⁺,Dy³⁺)/TPE发光材料的制备及其光学性能[J].材料科学与工程学报,2021,39(1):106-110.
[4] 徐艺嘉,王火明,李鑫.浅谈发光路面的现状与发展[J].江西建材,2017(2):168,172.
[5] 徐建晖,陈诚,万宏.长余辉路面自发光涂料研究及应用[J].公路交通技术,2017,33(6):14-16.
[6] 黄玲凤,王小文,陈芝.醇酸清漆表面包覆改性长余辉发光材料铝酸锶的耐水性能[J].漳州师范学院学报(自然科学版),2010,23(3):76-80.
[7] 吕兴栋.铝酸盐长余辉发光材料的功能化表面改性研究进展[J].材料导报,2008,22(1):34-36.
[8] 吕兴栋.铝酸锶发光粉的表面改性及其在水性乳胶漆中的应用[J].涂料工业,2008,38(4):39-41.
[9] 孙中新,刘应亮,袁定胜.长余辉发光材料CaAl₂O₄∶(Eu²⁺,Nd³⁺)的表面处理及其性能的研究[J].功能材料,2005,36(4):593-594.
[10] 吴学倩.SrAl₂O₄∶(Eu²⁺,Dy³⁺)发光粉表面包膜及其对性能的影响[D].西安:长安大学,2010.
[11] 张柳,裴建中,李蕊.表面修饰对道路标线发光材料耐水性的影响[J].中国资源综合利用,2018,36(2):25-27.
[12] 吕兴栋,舒万艮.碱土铝酸盐长余辉发光材料的有机包覆及其表征[J].应用化学,2005,22(6):638-642.
[13] Jaberi F,Movahed S O,Ahmadpour A.The study on titanium dioxide-silica binary mixture coated SrAl₂O₄∶(Eu²⁺,Dy³⁺)phosphor as a photoluminescence pigment in a waterborne paint[J].J Fluoresc,2019,29(2):461-471.
[14] Guo C F,Luan L,Huang D X,et al.Study on the stability of phosphor SrAl₂O₄∶(Eu²⁺,Dy³⁺) in water and method to improve its moisture resistance[J].Mater Chem Phys(Netherlands),2007,106(2):268-272.
[15] 熊敏.硅酸镁锶荧光粉的表面包覆改性研究[D].广州:华南理工大学,2017.
[16] Lyu L,Chen Y,Yu L.The improvement of moisture resistance and organic compatibility of SrAl₂O₄∶(Eu²⁺,Dy³⁺)persistent phosphors coated with silica-polymer hybrid shell[J].Materials,2020,13(2):426.
[17] 刘波,庄志强,刘勇.粉体的表面修饰与表面包覆方法的研究[J].中国陶瓷工业,2004(1):50-54.
[18] 高红云,张招贵.硅烷偶联剂的偶联机理及研究现状[J].江西化工,2003(2):30-34.
[19] 张世鹏,铁生年.KH-570硅烷偶联剂表面改性微硅粉分散性研究[J].人工晶体学报,2018,47(7):1396-1401.
[20] 杨志平,杨勇,朱胜超.水解对SrAl₂O₄∶(Eu²⁺,Dy³⁺)稳定性的影响[J].硅酸盐学报报,2004,32(9):1050-1053.
[21] 夏浩孚.SrAl₂O₄∶(Eu²⁺,Dy³⁺)荧光粉的表面均匀包覆及其发光性质研究[D].武汉:武汉工程大学,2015.