碳纳米管/环氧富锌涂层的制备与性能研究

聂佳1, 郭艳秋1, 赵巍2, 李世瀚2, 王海1, 宾月珍1*

化工新型材料 ›› 2022, Vol. 50 ›› Issue (5) : 141 -145.

PDF
化工新型材料 ›› 2022, Vol. 50 ›› Issue (5) : 141-145. DOI: 10.19817/j.cnki.issn1006-3536.2022.05.029
新材料与新技术

碳纳米管/环氧富锌涂层的制备与性能研究

    聂佳1, 郭艳秋1, 赵巍2, 李世瀚2, 王海1, 宾月珍1*
作者信息 +

Preperation and property of CNTs filled epoxy zinc-rich coating

  • Nie Jia1, Guo Yanqiu1, Zhao Wei2, Li Shihan2, Wang Hai1, Bin Yuezhen1
Author information +
文章历史 +
PDF

摘要

通过超声分散制备了稳定的多壁碳纳米管分散液,并通过与环氧富锌底漆复配,获得了性能优异的碳纳米管/环氧富锌涂料。通过硬度、附着力、耐冲击、电化学以及耐中性盐雾等测试方法探讨了碳纳米管含量对环氧富锌涂层性能的影响。结果表明:碳纳米管的添加,有效地提高了涂层的铅笔硬度和附着力。涂层的防腐性能随着碳纳米管含量的增加,先增加后减小,当碳纳米管质量分数为0.3%时,涂层的性能达到最佳,此时铅笔硬度为4H、附着力为7.6MPa,其耐盐雾性能在1600h以上。

Abstract

Carbon nanotubes(CNTs) filled epoxy zinc-rich coating was successfully prepared from a mixture of stable CNTs dispersion pretreated by ultrasonic and epoxy resin coatings through air spraying.The influence of CNTs content on the properties of the coating was investigated by hardness,adhesion test,impact resistance,electrochemical and neutral salt spray resistance test.The results showed that the pencil hardness and adhesion of the coating were improved by adding CNTs.The corrosion resistance of the coating increased first and then decreased with the increase of the CNTs content.The performance of the coating was optimal when the content of CNT was 0.3wt%.For the CNT (0.3wt%) filled epoxy zinc-rich coating,the pencil hardness was 4H,the adhesion force was 7.6MPa,and the salt spray resistance was more than 1600h.

关键词

碳纳米管 / 环氧富锌 / 防腐涂料

Key words

carbon nanotubes / epoxy zinc-rich / anticorrosive coating

引用本文

引用格式 ▾
碳纳米管/环氧富锌涂层的制备与性能研究[J]. 化工新型材料, 2022, 50(5): 141-145 DOI:10.19817/j.cnki.issn1006-3536.2022.05.029

登录浏览全文

4963

注册一个新账户 忘记密码

参考文献

[1] Marchebois H,Keddam M,Savall C,et al.Zinc-rich powder coatings characterisation in artificial sea water:EIS analysis of the galvanic action[J].Electrochimica Acta,2004,49(11):1719-1729.
[2] Ramezanzadeh B,Mohamadzadeh Moghadam M H,Shohani N,et al.Effects of highly crystalline and conductive polyaniline/graphene oxide composites on the corrosion protection performance of a zinc-rich epoxy coating[J].Chemical Engineering Journal,2017,320:363-375.
[3] Park J H,Yun T H,Kim K Y,et al.The improvement of anticorrosion properties of zinc-rich organic coating by incorporating surface-modified zinc particle[J].Progress in Organic Coatings,2012,74(1):25-35.
[4] Knudsen O Ø,Steinsmo U,Bjordal M.Zinc-rich primers-test performance and electrochemical properties[J].Progress in Organic Coatings,2005,54(3):224-229.
[5] Hayatdavoudi H,Rahsepar M.A mechanistic study of the enhanced cathodic protection performance of graphene-reinforced zinc rich nanocomposite coating for corrosion protection of carbon steel substrate[J].Journal of Alloys and Compounds,2017,727:1148-1156.
[6] Mohammadi S,Roohi H.Influence of functionalized multi-layer graphene on adhesion improvement and corrosion resistance performance of zinc-rich epoxy primer[J].Corrosion Engineering Science and Technology,2018,53(6):422-430.
[7] Meroufel A,Touzain S.EIS characterisation of new zinc-rich powder coatings[J].Progress in Organic Coatings,2007,59(3):197-205.
[8] Chen W B,Chen P,Chen H Y,et al.Development of Al-containing zinc-rich paints for corrosion resistance[J].Applied Surface Science,2002,187(1-2):154-164.
[9] Schaefer K,Miszczyk A.Improvement of electrochemical action of zinc-rich paints by addition of nanoparticulate zinc[J].Corrosion Science,2013,66:380-391.
[10] 钱伯章.碳纳米管的应用进展[J].化工新型材料,2010,38(2):9-11.
[11] 王芯玉,王刚,刘名瑞,等.水性反射辐射复合隔热涂料的制备及性能研究[J].化工新型材料,2020,48(5):112-116.
[12] Xu L,Liu F,Wang Z,et al.The effect of surface modification of zinc particles with phosphoric acid on the corrosion resistance of cold galvanizing coatings[J].Progress in Organic Coatings,2018,114:90-101.

基金资助

中国石油化工股份有限公司委托研发项目(3317011-4)

AI Summary AI Mindmap
PDF

648

访问

0

被引

导航
相关文章

AI思维导图

/