使用六亚甲基-1,6-二异氰酸酯(HMDI)、邻苯二甲酸酐(PA)、苯乙烯-甲基丙烯酸甲酯与甲基丙烯酸缩水甘油酯共聚物(KL-E4370)、巴斯夫扩链剂Joncryl?(ADR-4468)、环氧扩链剂、端基环氧基硅油对聚对苯二甲酸乙二醇酯回收料(R-PET)进行扩链改性。研究了单一扩链剂的种类、用量对R-PET的特性黏度、端羧基含量、熔指、结构、结晶性能的影响。结果表明:水分对特性黏度有一定的影响,R-PET经真空干燥后,特性黏度增加了6.54%~12.01%;筛选出ADR-4468为最优扩链剂,当添加质量分数为1.0%时,R-PET的特性黏度由0.48dL/g上升到0.69dL/g,端羧基含量显著降低。
Hexamethylene-1,6-diisocyanate (HMDI),phthalic anhydride (PA),terminal epoxy-based silicone oil,styrene-methyl methacrylate and glycidyl methacrylate copolymer (KL-E4370),ADR-4468 and purchased chain extender were used for the chain extension modification polyethylene terephthalate recycled material(R-PET).The effects of the type and amount of chain extender on the intrinsic viscosity,terminal carboxyl group content melt index,structure and crystallization properties of R-PET were studied.The results shown that water had a certain influence on the intrinsic viscosity.After vacuum drying of R-PET,the intrinsic viscosity increased by 6.54%~12.01%.ADR-4468 was selected as the optimal chain extender.When the addition amount was 1.0%,the intrinsic viscosity of R-PET increased from 0.48dL/g to 0.69dL/g,and the terminal carboxyl group content decreased significantly.
[1] Firas Awaja,Dumitru Pavel.Recycling of PET[J].European Polymer Journal,2005,41(7):1453-1477.
[2] 郭杰.改性回收聚酯PET瓶料吹塑薄膜成型工艺研究[D].北京:北京化工大学,2016.
[3] 周峰.回收PETG扩链增黏改性及其发泡性能的研究[D].武汉:湖北工业大学,2016.
[4] 朱花竹.聚对苯二甲酸乙二醇酯复合材料的性能表征与研究[D].合肥:合肥工业大学,2014.
[5] 陈秋云.PET瓶片的缩聚与反应挤出扩链研究[D].大连:大连理工大学,2012.
[6] 徐英杰.纳米二氧化硅填充对苯二甲酸乙二醇酯的结晶行为及老化性能研究[D].杭州:浙江大学,2015.
[7] Qin Dan,Wang Chaosheng,Wang Huaping,et al.Chain extension and thermal behavior of recycled poly(ethylene terephthalate) modified by reactive extrusion with triphenyl phosphite[J].MATEC Web of Conferences,2016,67:06052.
[8] 杨亮.PP/r-PET复合材料结构与性能研究[D].大连:大连工业大学,2016.
[9] 樊明帅,冯钠,曲敏杰,等.亚磷酸三苯酯扩链改性r-PET及其结晶性能研究[J].现代塑料加工应用,2017,29(4):45-48.
[10] Karsli N G.A study on the fracture,mechanical and thermal properties of chain extended recycled poly (ethylene terephthalate)[J].Journal of Thermoplastic Composite Materials,2017,30(8):1157-1172.
[11] 秦丹,王朝生,王伟等.废旧聚酯纺织品的再生扩链改性研究[J].合成纤维工业,2016,39(4):19-23.
[12] 刘宝玉,唐舫成,汪加胜,等.新型环氧扩链剂对回收PA66性能的影响[J].塑料工业,2014,42(3):118-121.
[13] Wang Kai,Qian Jianhua,Lou Feipeng,et al.Chain extension and branching of poly(ethylene terephthalate) (PET) with di- and multifunctional epoxy or isocyanate additives:an experimental and modelling study[J].Reactive & Functional Polymers,2012,72(1):50-60.
[14] Cavalcanti F N,Teófilo E T,Rabello M S,et al.Chain extension and degradation during reactive processing of PET in the presence of triphenyl phosphite[J].Polymer Engineering and Science,2007,47(12):2155-2163.
[15] Bimestre B H,Saron C.Chain extension of poly(ethylene terephthalate) by reactive extrusion with secondary stabilizer[J].Materials Research,2012,15(3):467-472.
[16] 顾艺,夏艳平,曹峥,等.化学扩链法/固相缩聚法对聚对苯二甲酸乙二醇酯的结晶与流变性能的影响[J].高分子材料科学与工程,2018,34(1):54-59.
[17] 高琨.PET回收料的改性研究[D].北京:北京工商大学,2010.
[18] Xiao L,Wang H,Qian Q,et al.Molecular and structural analysis of epoxide-modified recycled poly (ethylene terephthalate) from rheological data[J].Polymer Engineering & Science,2012,52(10):2127-2133.