综述与专论

碳纳米管杂化材料的制备及在环氧纳米复合材料中的应用

展开
  • 安徽理工大学材料科学与工程学院,淮南232001
李振宇(1995-),男,硕士研究生,主要研究方向为环氧纳米复合材料,E-mail:951252732@qq.com。

收稿日期: 2019-10-08

  修回日期: 2020-10-13

  网络出版日期: 2021-01-27

基金资助

国家自然科学基金(51775001)

Fabrication of CNT hybrid and its application on EP nanocomposite

Expand
  • School of Material Science and Engineering,Anhui University of Science and Technology,Huainan 232001

Received date: 2019-10-08

  Revised date: 2020-10-13

  Online published: 2021-01-27

摘要

碳纳米管(CNT)以其优异的综合性能在纳米复合材料中应用广泛。近年来,利用自组装工艺将CNT与金属、非金属或氧化物纳米材料结合制备出纳米杂化材料的研究颇受关注。主要综述了近5年来有关CNT的表面杂化途径和制备方法,着重叙述了CNT纳米杂化材料对环氧纳米复合材料力学性能、电性能、热稳定性、摩擦磨损行为以及阻燃特性的影响规律,并分析相关作用机理。

本文引用格式

李振宇, 冯雪松, 刘月, 徐煜轩, 杨继年 . 碳纳米管杂化材料的制备及在环氧纳米复合材料中的应用[J]. 化工新型材料, 2021 , 49(1) : 1 -4 . DOI: 10.19817/j.cnki.issn 1006-3536.2021.01.001

Abstract

Carbon nanotube (CNT) has been widely applied in yielding the nanocomposites due to its excellent comprehensive properties.Recently,a lot of researches have focused on the fabrication of CNT nanohybrids combined with nanoscale metal,non-metal or oxide particles via self-assembly.The research progresses of surface hybridization of CNT and its applications on the EP nanocomposites during the past five years were reviewed.The effects of CNT nanohybrids on the mechanical properties,electrical conductivity,thermal stability,tribological behavior and flame retardancy of EP nanocomposites were emphasized and discussed in detail,and analyzed the mechanisms.

参考文献

[1] 寇伍轩,赵岳,高崇杰,等.SiO2@MWCNTs/EP纳米复合材料性能研究[J].绝缘材料,2017,50(4):5-10.
[2] Vu P G,Truc T A,Chinh N T,et al.Improvement of mechanical and dielectric properties of epoxy resin using CNTs/ZnO nanocomposites[J].Jouranl of Nanoscience and Nanotechnol,2018,18(4):2830-2837.
[3] Hawkins S A,Yao H,Wang H,et al.Tensile properties and electrical comductivity of epoxy composite thin films containing zinc oxide quantum dots and multi-walled carbon nanotubes[J].Carbon,2017,115:18-27.
[4] 郭唐华,陈圣岳,彭懋.氨基化二氧化硅包覆碳纳米管增强环氧树脂复合材料[J].材料科学与工程学报,2014,32(4):475-504.
[5] Li A,Li W,Ling Y,et al.Effects of silica-coated carbon nanotubes on the curing behavior and properties of epoxy composites[J].RSC Advances,2016,6(28):23318-23326.
[6] 高崇杰,寇伍轩,赵岳,等.SiO2@MWCNTs的制备及SiO2@MWCNTs/EP复合材料电性能的研究[J].绝缘材料,2016,49(11):15-20.
[7] Kim K,Kim Y,Nam J,et al.Mechanical properties of silica-coated multi-walled carbon nanotube/epoxy composites[J].Polymer Korea,2016,40(1):117-123.
[8] Chung M H,Chen L M,Wang W H,et al.Effects of mesoporous silica coated multi-wall carbon nanotubes on the mechanical and thermal properties of epoxy nanocomposites[J].Journal of the Taiwan Institute of Chemical Engineers,2014,45(5):2813-2819.
[9] Singh A K,Panda B P,Mohanty S,et al.Study on metal decorated oxidized multiwalled carbon nanotube(MWCNT)-epoxy adhesive for thermal conductivity applications[J].Journal of Materials Science:Materials in Electronics,2017,28(12):8908-8920.
[10] Choi J R,Rhee K Y,Park S J.Influence of electrolessly silver-plated multi-walled carbon nanotubes on thermal conductivity of epoxy matrix nanocomposites[J].Composites Part B:Engineering,2015,80:379-384.
[11] Salimi M N,Sahraei A A,Baniassadi M,et al.Synergistic effect of carbon nanotubes and copper particles in an epoxy-based nanocomposite using electroless copper deposited carbon nanotubes:part Ⅰ-mechanical properties[J].Journal of Composite Materials,2015,50(14):1909-1920.
[12] Zhang X,Zhao D,Luan D,et al.Fabrication and mechanical properties of multiwalled carbon nanotube/nanonickel reinforced epoxy resin composites[J].Applied Physics A,2016,122(12):1056.
[13] Dian L Y,Johan M R.Electrical conductivity and transport properties of gold decorated amorphous carbon nanotubes/epoxy composites[J].Fullerenes,Nanotubes and Carbon Nanostructures,2014,23(2):120-124.
[14] 祁蓉,王劲,张立,等.碳纳米管-纳米ZnO改性环氧复合材料的制备与性能[J].材料导报,2016,30(27):82-86.
[15] 何毅,冉翔,马瑜,等.ZrO2-MWCNTs复合材料的制备及ZrO2-MWCNTs/环氧复合涂层性能研究[J].化工新型材料,2016,44(5):90-93.
[16] Yi H,Chen C,Zhong F,et al.Preparation of aluminum oxide-coated carbon nanotubes and the properties of composite epoxy coatings research[J].High Performance Polymers,2013,26(3):255-264.
[17] 何毅,陈春林,罗智,等.TiO2-MWCNTs的制备及TiO2-MWCNTs/epoxy复合涂层性能[J].复合材料学报,2014,31(2):429-435.
[18] He Y,Chen C,Zhong F,et al.Synthesis and properties of iron oxide coated carbon nanotubes hybrid materials and their use in epoxy coatings[J].Polymers for Advanced Technologies,2015,26(4):414-421.
[19] Li X,Chen B,Jia Y,et al.Enhanced trobological properties of epoxy-based lubricating coatings using carbon nanotubes-ZnS hybrid[J].Surface and Coatings Technology,2018,344:154-162.
[20] Zhou K,Liu J,Shi Y,et al.MoS2 nanolayers grown on carbon nanotubes:An advanced reinforcement for epoxy composites[J].ACS Applied Materials & Interfaces,2015,7(11):6070-6081.
[21] Hou Y B,Hu W Z,Liu L X,et al.In-situ synthesized CNTs/Bi2Se3 nanocomposites by a facile wet chemical method and its application for enhancing fire safety of epoxy resin[J].Composites Science and Technology,2018,157:185-194.
[22] Yang Q,Liu L,Hui D,et al.Microstructure,electrical conductivity and microwave absorption properties of γ-FeNi decorated carbon nanotube composites[J].Composites Part B:Engineering,2016,87:256-262.
[23] Shen Y,Liang G,Yuan L,et al.Unique Li0.3Ti0.02Ni0.68O-carbon nanotube hybrids:sunthesis and their epoxy resin composites with remarkably higher dielectric constant and lower dielectric loss[J].Journal of Alloys and Compounds,2014,602:16-25.
[24] Zhao B,Jiang G.Thermal comductive epoxy enhanced by nanodiamond-coated carbon nanotubes[J].Electronic Materials Letters,2017,13(6):512-517.
Options
文章导航

/