综述与专论

模板法制备纳米金属氧化物材料现状及发展趋势

展开
  • 宝鸡文理学院化学化工学院,宝鸡 721013
慕霞霞(1996-),女,硕士研究生,主要研究方向为纳米粉体制备。

网络出版日期: 2020-12-07

基金资助

国家自然科学基金资助项目(51471003);陕西省自然科学基础研究计划项目(2018JM5035)

Status and development of nanostructured metal oxide by templated synthesis

Expand
  • School of Chemistry and Chemical Engineering,Baoji University of Art and Science, Baoji 721013

Online published: 2020-12-07

摘要

模板合成法是制备纳米材料的一种重要合成方法。模板又可分为物理模板、化学模板和生物模板,这些模板被用来制作各种形态的纳米氧化物材料,如粉体、薄膜、纳米丝(线、带、棒、管)和孔状等,但两种模板各有优劣。首先介绍了模板的结构和制备方式;其次分析了不同方法的发展现状,讨论了这些方法的优势与不足;最后根据当前面对的困难和未来面临的挑战,讨论了模板法制备纳米金属氧化物的发展趋势。

本文引用格式

慕霞霞, 陈虎魁, 蒋红丽, 姜宇, 黄杰 . 模板法制备纳米金属氧化物材料现状及发展趋势[J]. 化工新型材料, 2020 , 48(11) : 39 -43 . DOI: 10.19817/j.cnki.issn 1006-3536.2020.11.009

Abstract

Templating consists of physical,chemical and biological template,they all have both advantages and disadvantages,used to make a variety of nano-oxide materials,such as powder,film,nanowire (wire,tape,rod,tube) and pore.Firstly,the structure and organization of the various templates,and preparing nanostructured metal oxides by template method in recent years were introduced.Then recent development in this area was analyzed,and discussed the superiority and weaknesses of these methods in detail.Finally followed by studied templated synthesis perspective on the state of the field and potential future directions according to the current difficulties and future challenges.

参考文献

[1] Huczko A.Template-based synthesis of nanomaterials[J].Applied Physics A,2000,70(4):365-376.
[2] 李元伟,张猛,王小健,等.纳米多孔金属的制备方法及其力学性能的研究进展[J].航空材料学报,2018,38(5):10-23.
[3] Penner R M,Martin C R.Electronically conductive composite polymer membranes[J].J Electrochem Soc,1986,310-315.
[4] Liu Y,Goebl J,Yin Y.Templated synthesis of nanostructured materials[J].Chemical Society Reviews,2013,42(7):2610-2653.
[5] Zhang Y,Lu L,Zhang Z,et al.Natural nanomaterial as hard template for scalable synthesizing holey carbon naonsheet/nanotube with in-plane and out-of-plane pores for electrochemical energy storage[J].Chinese Chemical Letters,2018,29(4):641-644.
[6] Scisco G,Skinner A,Hill J J,et al.Nanoporous aluminum oxide templates of arbitrary thickness on silicon carrier wafer[C]Meeting Abstracts.The Electrochemical Society,2019(33):1775-1775.
[7] 高新芊,陆文多,户守昭,等.棒状多孔氧化铝负载氧化铬催化丙烷脱氢反应性能[J].催化学报,2019,40(2):184-191.
[8] 倪似愚,郑国渠,曹华珍,等.多孔阳极氧化铝为模板电沉积制备纳米线的研究进展[J].科技通报,2003,19(6):466-469.
[9] Stber W,Fink A,Bohn E.Controlled growth of monodisperse silica spheres in the micron size range[J].Journal of Colloid and Interface Science,1968,26(1):62-69.
[10] Chen H L,Ding J,Wang Y M.Synthesis of hierarchical MgO-containing silicalite-1 zeolites with high hydrothermal stability[J].Acta Physico-Chimica Sinica,2013,29(5):1035-1040.
[11] 陈杨.树枝状介孔氧化硅磨粒的制备和抛光性能[J].材料研究学报,2019-6-12.
[12] 张亚楠,刘博文,吴浩,等.以稻壳为原料合成等级孔Y型分子筛[J].工业催化,26(12):39-42.
[13] Talapaneni S N,Ramadass K,Ruban S J,et al.3D cubic mesoporous C3N4 with tunable pore diameters derived from KIT-6 and their application in base catalyzed Knoevenagel reaction[J].Catalysis Today,2019,324:33-38.
[14] Moosavifard S E,Shamsi J,Fani S,et al.3D ordered nanoporous NiMoO4 for high-performance supercapacitor electrode materials[J].RSC Advances,2014,4(94):52555-52561.
[15] 王博凯,张涛,程晓捷,等.溶胶-凝胶法制备纳米氧化物陶瓷研究现状[J].台州学院学报,2013,35(6):50-55.
[16] 陈改荣,徐绍红,杨军.硬脂酸溶胶-凝胶法制备氧化镁纳米微粒的研究[J].功能材料,2002,33(5):521-523.
[17] Utamapanya S,Klabunde K J,Schlup J R.Nanoscale metal oxide particles/clusters as chemical reagents.Synthesis and properties of ultrahigh surface area magnesium hydroxide and magnesium oxide[J].Chemistry of Materials,1991,3(1):175-181.
[18] 王麟生,方海红,李强.一种用自蔓延溶胶-凝胶法专利:中国,CN100391845C[P].2006-06-04.
[19] 曹玉萍.纳米氧化镁颗粒和薄膜的制备[D].济南:山东师范大学,2007.
[20] Ouraipryvan P,Sreethawong T,Chavadej S.Synthesis of crystalline MgO nanoparticle with mesoporous-assembled structure via a surfactant-modified sol-gel process[J].Materials Letters,2009,63(21):1862-1865.
[21] 马丽,蒋平,孙瑞琴等.凝胶模板法制备高比表面积氧化镁[J].催化学报,2009,30(7):631-636.
[22] 刘振.凝胶-燃烧法由轻烧菱镁矿制备纳米氧化镁[J].应用化工,2015,44(5):0810-0813.
[23] 李美葶,罗旭东,张国栋,等.发泡法和溶胶-凝胶法制备镁质多孔材料[J].无机盐工业,2017,49(1):19-21,55.
[24] Malhotra S L,Minh L,Blanchard L P.Thermal decomposition and glass transition temperature of poly (ethyl methacrylate) and poly (n-butyl methacrylate)[J].Journal of Macromolecular Science—Chemistry,1983,19(4):559-578.
[25] Rahmatika A M,Yuan W,Arif A F,et al.Energy-efficient templating method for the industrial production of porous carbon particles by a spray pyrolysis process using poly (methyl methacrylate)[J].Industrial & Engineering Chemistry Research,2018,57(33):11335-11341.
[26] Li H,Dai H,He H,et al.Facile route using highly arrayed PMMA spheres as hard template for the fabrication of 3D ordered nanoporous MgO[J].Chinese Journal of Chemical Physics,2007,20(6):697.
[27] 陈枭,徐涛,雷华,等.多功能nano ZnO/PMMA复合材料的制备与性能[J].复合材料学报,2018,35(2):245-252.
[28] Bender C M,Burlitch J M,Barber D,et al.Synthesis and fluorescence of neodymium-doped barium fluoride nanoparticles[J].Chemistry of Materials,2000,12(7):1969-1976.
[29] 肖文,钟世安,付邦.反相微乳液法制备纳米氧化镁颗粒及其反应机理研究[J].现代化工,2010(3):61-63.
[30] 黄云,马若男,曾宪哲,等.软模板法制备三维花状MgAl-LDH及其吸附性能[J].无机化学学报,2018,34(5):925-932.
[31] Ohmura J F,Burpo F J,Lescott C J,et al.Highly adjustable 3D nano-architectures and chemistries via assembled 1D biological templates[J].Nanoscale,2019,11(3):1091-1102.
[32] Sanjay S S.Green S,Characterization and applications of nanoparticles[M].Amsterdam:Elsevier,2019:27-36.
[33] Khademi-Azandehi P,Moghaddam J.Green synthesis,characterization and physiological stability of gold nanoparticles from Stachys lavandulifolia Vahl extract[J].Particuology,2015,19:22-26.
[34] Yu J,Xu D,Guan H N,et al.Facile one-step green synthesis of gold nanoparticles using Citrus maxima aqueous extracts and its catalytic activity[J].Materials Letters,2016,166:110-112.
[35] Zhu X,Pathakoti K,Hwang H M.Green synthesis,characterization and applications of nanoparticles[M].Amsterdam:Elsevier,2019:223-263.
[36] Pinheiro A V,Han D,Shih W M,et al.Challenges and opportunities for structural DNA nanotechnology[J].Nature Nanotechnology,2011,6(12):763-772.
[37] Ke Y.Designer three-dimensional DNA architectures[J].Current Opinion in Structural Biology,2014,27:122-128.
[38] Xing S,Jiang D,Li F,et al.Constructing higher-order DNA nanoarchitectures with highly purified DNA nanocages[J].ACS Applied Materials & Interfaces,2014,7(24):13174-13179.
[39] 赵新美.生物模板法在制备贵金属纳米线中的应用[J].山东化工,2018,47(4):29-31.
[40] 阮秀,董磊,于晶,等.软模板法合成纳米材料的研究进展[J].材料导报,2012(1):56-60.
[41] 余晓,陈中银,牛新书,等.蛋膜结构氧化锌微纤维的合成与表征[J].河南师范大学学报(自然科学版),2007(4):103-105.
[42] 钱君超,陈丰,钱前,等.生物鸡蛋内膜结构氧化铈材料的合成与表征[J].高等学校化学学报,2010,31(11):2116-2121.
[43] 严晶晶.以蛋白质为模板制备二氧化钛纳米材料及机理探讨[D].天津:南开大学,2010.
[44] 黄雅玲,周羚,罗双,等.秸秆模板法制备多孔纳米二氧化钛及降解甲基橙研究[J].河南化工,2013,30(17):30-34.
[45] 黄雨婷,英祖萍,郑继兴,等.分级多孔结构ZnO的秸秆生物模板法制备及光催化性能[J].高等学校化学学报,2018(9):2031-2038.
[46] 周帅坤,谢奕明,赵永婷,等.滤纸模板法制备纳米SnO2及其在太阳能电池中的应用[J].中国粉体技术,2014,20(3):34-38.
[47] Zhang Q,Li Q,Li J,et al.Photocatalysis of TiO2 sheets prepared by templating filter paper[J].Chinese Journal of Chemical Physics,2013,24(1):85-90.
[48] Guo P,Huang J,Zhao Y,et al.Nanomaterial preparation by extrusion through nanoporous membranes[J/OL].Small,2018,14(18):1703493.DOI:10.1002/smll.201703493.
Options
文章导航

/