新材料与新技术

高导热绝缘复合材料的制备与性能研究

展开
  • 西安工程大学材料工程学院,西安 710048
宁静(1994-),女,硕士,主要研究方向为高导热绝缘复合材料。

收稿日期: 2019-05-09

  修回日期: 2020-06-25

  网络出版日期: 2020-10-20

基金资助

西安市科技局科技创新引导项目[201805030YD8CG14(14)];陕西省特殊人才支持计划;陕西高校青年杰出人才支持计划项目资助:陕西省重点研发计划项目资助(2020GY-035)

Preparation and property of high thermal conductivity insulating composite

Expand
  • School of Materials Science & Engineering,Xi'an Polytechnic University,Xi'an 710048

Received date: 2019-05-09

  Revised date: 2020-06-25

  Online published: 2020-10-20

摘要

以酚醛环氧树脂、双酚F型环氧树脂和自配环氧树脂A 3种树脂为基体组合树脂,导热填料采用微米级不同粒径的Al2O3,通过共混、熔融、丝印和热固等工艺制备Al2O3/复合材料。研究了不同粒径配比对所制备复合材料的微观组织和性能的影响。结果表明,当Al2O3的填充量为80%(wt,质量分数)时,大小粒径填料的质量之比为 2:1,酚醛环氧树脂、双酚F型环氧树脂和自配环氧树脂A的质量配比为1:1:3时,所制备的复合材料的导热系数为1.53W/(m·K),击穿电压为43.82kV/mm。

本文引用格式

宁静, 苏晓磊, 刘毅 . 高导热绝缘复合材料的制备与性能研究[J]. 化工新型材料, 2020 , 48(9) : 76 -80 . DOI: 10.19817/j.cnki.issn 1006-3536.2020.09.017

Abstract

Al2O3/composite was prepared by blending,melting,silk-printing and thermosetting processing using phenolic epoxy resin,bisphenol F epoxy resin and self-made epoxy resin A as the matrix resins and micro Al2O3 with different particle size as the filler,respectively.The effects of different particle size ratios on the microstructures and properties of the composites were studied.Results shown that when the content of Al2O3 filler was 80wt%,the ratio of filler size to particle size was 2:1,and the ratio of phenolic epoxy resin,bisphenol F epoxy resin and self-made epoxy resin A was 1:1:3,the thermal conductivity and breakdown voltage of the prepared composites were 1.53W/mK and 43.82kV/mm,respectively.

参考文献

[1] 冯伟,李伟.填充型导热绝缘聚合物基复合材料的研究进展[J].炭素,2017(3):5-11.
[2] 崔永红,焦剑,汪雷,等.高导热复合材料研究进展[J].4,2015,4(3):1001-5922.
[3] 江平开,陈金,黄兴溢.高导热绝缘聚合物纳米复合材料的研究现状[J].高电压技术,2017,43(9):2791-2799.
[4] 陈自安,李珍,王建功等.填充型导热绝缘塑料的研究进展[J].现代塑料加工应用,2016,2016(3):56-59.
[5] 王军,胡晓丹,吴新健等.导热绝缘有机硅复合材料的制备与性能[J].高分子材料科学与工程,2018,34(10):145-150.
[6] 田付强,王志晓,刘雪梅,等.高导热绝缘材料及其在电动汽车中的应用[J].绝缘材料,2018,51(11):31-39.
[7] 田溪鹤,魏松,张瑶.填充型环氧树脂基导热绝缘复合材料研究进展[J].绝缘材料,2018,51(7):14-19.
[8] 徐建林,王程程,牛磊,等.导热绝缘复合材料的研究进展[J].工程塑料应用,2016,44(8):120-123.
[9] 尹传根,范金辰,闵宇霖,等.聚酰亚胺/氮化硼导热绝缘复合材料的研究进展[J].绝缘材料,2017(8):40-46.
[10] 袁立敏,陈华,冯鑫,等.填充型高导热绝缘材料研究综述[J].绝缘材料,2017(8):29-33.
[11] 赵维维.表面修饰Al2O3/环氧树脂复合材料界面和导热性能的研究[D].南京航空航天大学,2013.
[12] 董金虎.绝缘导热高分子复合材料研究现状[J].广州化工,2012,40(6):14-15.
[13] 任芳,任鹏刚,狄莹莹.导热绝缘高分子复合材料的研究进展[J].包装工程,2009,30(2):122-124.
[14] 王晨,张德晓,王力.新型导热凝胶材料在航空电子设备中的应用[J].航空电子技术,2016,47(3):43-46.
[15] 廖治强导热绝缘硅橡胶复合材料的制备及性能研究[D].西南科技大学,2016.
[16] Shapiro A A,Haque I.An improved thermal conductivity polyurethane composite for a space borne 20kV powersupply[C].Aerospace Conference,2005:1-11.
[17] 李瑶,陈洋,邹华维,等.尼龙6/可膨胀石墨/Al2O3导热绝缘复合材料的制备与性能[J].高分子材料科学与工程,2018,34(9):125-130.
[18] Kozako M,Okazaki Y,Hikita M,et al.Preparation and evaluation of epoxy composite insulating materials toward high thermal conductivity[C].IEEE International Conference on Solid Dielectrics,2010:1-4.
[19] 刘举,王冲,付登强,等.导热绝缘PA6复合材料的制备及性能研究[J].绝缘材料,2018,51(4):1009-9239.
[20] Lee G W,Min P,Kim J,et al.Enhanced thermal conductivity of polymer composites filled with hybrid filler[J].Composites Part A Applied Science & Manufacturing,2006,37(5):727-734.
Options
文章导航

/