[1] Asundi A,Choi Alta Y N.Fiber metal laminates:an advanced material for future aircraft[J].Mater Process Technology,1997,63:384-394.
[2] Vermeeren C A J R.An historic overview of the development of fibre metal laminates[J].Applied Composite Materials,2003,10:189-205.
[3] Botelho E C,Silva R A,Pardini L C,et al.A review on the development and properties of continuous fiber/epoxy/aluminum hybrid composites for aircraft structures[J].Mater Res,2006,9(3):247-256.
[4] Vogelesang L B,Vlot A.Development of fibre metal laminates for advanced[J].Mater Process Technol,2000,103:1-5.
[5] Tamer Sinmazçelik,Egemen Avcu,Mustafa Özgür Bora,et al.A review:fibre metal laminates,background,bonding types and applied[J].Materials and Design,2011,32:3671-3685.
[6] Alderliesten R.On the development of hybrid material concepts for aircraft structures[J].Recent Patents Eng,2009,3:25-38.
[7] Khan S U,Alderliesten R C,Benedictus R.Post-stretching induced stress redistribution in fibre metal laminates for increased fatigue crack growth resistance[J].Compos Sci Technol,2009,69:396-405.
[8] Lin C T,Kao P W,Yang F S.Fatigue behaviour of carbon fibre-reinforced aluminium laminates[J].Composites,1991,22(2):135-141.
[9] Sun C T,Dicken A,Wut H F.Characterization of impact damage in ARALL laminates[J].Compos Sci Technol,1993,49:139-144.
[10] 崔海超,王海鹏.玻璃纤维-铝合金层合板补强拉伸性能及破坏机理研究[J].玻璃钢/复合材料,2018(2):36-40.
[11] Lin C T,Kao P W.Fatigue delamination growth in carbon fibre-reinforced aluminium laminates[J].Composites A,1996,27:9-15.
[12] Moussavi-Torshizi S E,Dariushic S,Sadighic M,et al.A study on tensile properties of a novel fiber/metal laminates[J].Mater Sci Eng A,2010,527:4920-4925.
[13] Vlot A.Fibre metal laminates:an introduction[M].Netherlands:Kluwer Academic Publishers,2001.
[14] Elke Hombergsmeier.Development of advanced laminates for aircraft structures[C].25th International Congress of the Aeronautical Sciences.Germany:Hamburg,2006:1-10.
[15] Xia Y,Wang Y,Zhou Y,et al.Effect of strain rate on tensile behavior of carbon fiber reinforced aluminum laminates[J].Mater Lett,2007,61:213-215.
[16] Dimitrios Mamalis,Winifred Obande,Vasileios Koutsos,et al.Novel thermoplastic fibre-metal laminates manufactured by vacuum resin infusion:the effect of surface treatments on interfacial bonding[J].Material Design,2019,162:331-344.
[17] Liu J,Chaudhury M K,Berry D H,et al.Effect of surface morphology on crack growth at a sol-gel reinforced epoxy/aluminium interface[J].Journal of Adhesion,2006,82(5):487-516.
[18] Harris A F,Beevers A.The effects of grit-blasting on surface properties for adhesion[J].International Journal of Adhesion & Adhesives,1999,19:445-452.
[19] Rider A N,Arnott D R.Boiling water and silane pre-treatment of aluminium alloys for durable adhesive bonding[J].International Journal of Adhesion & Adhesives,2000,20:209-220.
[20] Rider A N,Olsson-Jacques C L,Arnott D R.Influence of adherend surface preparation on bond durability[J].Surf Interface Anal,1999,27:1055-1063.
[21] Lefebvre D R,Ahn B K,Dillard D A,et al.The effect of surface treatments on interfacial fatigue crack initiation in aluminum/epoxy bonds[J].International Journal of Fracture,2002,114(2):191-202.
[22] Brewis D M,Critchlow G W.Locus of failure of T-peel joints formed between aluminium and various adhesives[J].International Journal of Adhesion & Adhesives,1997,17(1):33-38.
[23] Prolongo S G,Uren A.Effect of surface pre-treatment on the adhesive strength of epoxy-aluminium joints[J].International Journal of Adhesion & Adhesives,2009,29:23-31.
[24] Sang Park S Y,Choi W J,Choi H S,et al.Effects of surface pre-treatment and void content on GLARE laminate process characteristics[J].Journal of Materials Processing Technology,2010,210(8):1008-1016.
[25] Oosting R.Toward a new durable and environmentally compliant adhesivebonding process for aluminum alloys[D].Delft:Delft University of Technology Repository,1995.
[26] Critchlow G W,Brewis D M.Review of surface pretreatments for aluminium alloys[J].International Journal of Adhesion & Adhesives,1996,16(4):255-275.
[27] Wernick S,Pinner R,Mason R B.The surface treatment and finishing of aluminium and its alloys[J].Journal of the Electrochemical Society,1957,104(8):118-128.
[28] Bjørgum Astrid,Lapique Fabrice,Walmsley John,et al.Anodising as pre-treatment for structural bonding[J].International Journal of Adhesion & Adhesives,2003,23(5):401-412.
[29] Critchlow G W,Yendall K A,Bahrani D,et al.Strategies for the replacement of chromic acid anodising for the structural bonding of aluminium alloys[J].International Journal of Adhesion & Adhesives,2006,26(6):419-453.
[30] Critchlow G W,Brewis D M,Emmony D C,et al.Initial investigation into the effectiveness of CO2-laser treatment of aluminium for adhesive bonding[J].International Journal of Adhesion & Adhesives,1995,15(4):233-236.
[31] De Iorio I,Leone C,Nele L,et al.Plasma treatments of polymeric materials and Al alloy for adhesive bonding[J].J Mater Process Technol,1997,68:179-183.
[32] Xia Y,Wang Y,Zhou Y,et al.Effect of strain rate on tensile behavior of carbon fiber reinforced aluminum laminates[J].Mater Lett,2007,61:213-215.
[33] Khalili S M R,Mittal R K,Kalibar G S.A study of the mechanical properties of steel/aluminium/GRP laminates[J].Mater Sci Eng A,2005,412:137-140.
[34] Carrillo J G,Cantwell W J.Scaling effects in the tensile behavior of fiber-metal laminates[J].Compos Sci Technol,2007,67:1684-1693.
[35] Corte's P,Cantwell W J.The fracture properties of a fibre-metal laminate based on magnesium alloy[J].Composites B,2006,37:163-170.
[36] De Vries T J,Vlot A,Hashagen F.Delamination behavior of spliced fiber metal laminates part 1.Experimental results[J].Compos Struct,1999,46:131-145.
[37] Ye L,Afaghi-Khatibi A,Lawcock G,et al.Effect of fibre/matrix adhesion on residual strength of notched composite laminates[J].Composites Part A,1998,29:1525-1533.
[38] Reyes V G,Cantwell W J.The mechanical properties of fibre-metal laminates based on glass fibre reinforced polypropylene[J].Compos Sci Technol,2000,60:1085-1094.
[39] Botelho E C,Almeida R S,Pardini L C,et al.Elastic properties of hygrothermally conditioned glare laminate[J].Int J Eng Sci,2007,45:163-172.
[40] Hinz S,Omoori T,Hojo M,et al.Damage characterisation of fibre metal laminates under interlaminar shear load[J].Composites Part A:Applied Science and Manufacturing,2009,40(6):925-931.
[41] Chang P Y,Yeh P C,Yang J M.Fatigue crack initiation in hybrid boron/glass/aluminum fiber metal laminates[J].Mater Sci Eng,2008,496:273-280.
[42] 刘永强,王向盈,唐长红,等.四种飞机蒙皮材料抗鸟撞性能对比研究[J].航空材料学报,2015,35(5):82-89.
[43] Sadighi M,Alderliesten R C,Benedictus R.Impact resistance of fiber-metal laminates:a review[J].International Journal of Impact Engineering,2012,49:77-90.
[44] Vlot A.Low velocity impact loading onfiber reinforced aluminium laminates (Arall and Glare) and other aircraft sheet materials[R].The Netherlands:Delft University of Technology.
[45] Laliberte J F,Straznicky P V,Poon C.Impact damage in fiber-metal laminates,part 1:experiment[J].AIAA Journal,2005,43(11):2445-2453.
[46] Fan J,Guan Z W,Cantwell W J.Numerical modeling of perforation failure in fiber-metal laminates subjected to low velocity impact loading[J].Composite Structure,2011,93:2430-2436.
[47] Seo H,Hundley J,Hahn H T,et al.Numerical simulation of glass-fiberreinforced aluminium laminates with diverse impact damage[J].AIAA Journal,2010,48(3):676-687.
[48] Sadighi M,Parnanen T,Alderliesten R C,et al.Experimental and numerical investigation of metal type and thickness effects on the impact resistance of fiber-metal laminates[J].Appllied Composite Materials,2012,19(3):545-559.
[49] Laliberte J,Poon C,Straznicky P V.Numerical modeling of low-velocity impact damage in fiber-metal laminates[C].ICAS 2002 Congress (The International Council of the Aeronautical Sciences Congress).Canada:Toronto,2002:1-10.
[50] Vogelesang L B,Vlot A.Development of fibre metal laminates for advanced aerospace structures[J].Journal of Materials Processing Technology,2000,103(1):1-5.