采用宏观力学性能测试(0°压缩测试、90°拉伸测试、层间剪切测试、弯曲测试)、微观力学性能测试(微脱粘测试)、扫描电镜(SEM)以及偏光显微镜观察,对不同碳纤维/热塑性树脂复合材料界面性能进行了多维度的研究。
Macroscopic mechanical properties tests (0° compression test,90° tensile test,interlaminar shear test,bending test),micromechanical properties test (micro-debonding test,monofilament fracture test),scanning electron microscopy (SEM),and polarizing microscope were used to study multidimensionally the interfacial properties of different kinds of carbon fiber/thermoplastic resin composites.
[1] 贺福.碳纤维及石墨纤维[M].北京:化学工业出版社,2010.
[2] Han X,Zhao Y,Sun J M,et al.Effect of graphene oxide addition on the interlaminar shear property of carbon fiber-reinforced epoxy composites[J].New Carbon Materials,2017,32(1):48-55.
[3] 罗云烽,李阳,肇研,等.国产T800级炭纤维表面特性及其复合材料微观界面性能[J].材料工程,2014(9):83-88.
[4] Chen J,Zhang T,Wang K,et al.Multiscale enhancement behavior of nano-silica modified CF/PEEK composites prepared by wet powder impregnation[J].Polymer Composites,2019,40(3):1187-1197.
[5] Zhao X,Liu G,Gong M,et al.Effect of tackification on in-plane shear behaviours of biaxial woven fabrics in bias extension test:experiments and finite element modeling[J].Composites Science & Technology,2018,159:33-41.
[6] Wong K J,Nirmal U,Lim B K.Impact behavior of short and continuous fiber reinforced polyester composites[J].Journal of Reinforced Plastics & Composites,2010,29:3463-3474.
[7] Guo J H,Huang Y,Liu L,et al.Effect of epoxy coatings on carbon fibers during manufacture of carbon fiber reinforced resin matrix composites[J].Materials & Design,2010,31(3):1186-1190.
[8] Sa R,Yan Y,Wei Z,et al.Surface modification of aramid fibers by bio-inspired poly (dopamine) and epoxy functionalized silane grafting[J].ACS Applied Materials & Interfaces,2014,6(23):21730-21738.
[9] Chen J L,Wang K,Zhao Y.Enhanced interfacial interactions of carbon fiber reinforced PEEK composites by regulating PEI and graphene oxide complex sizing at the interface[J].Composites Science & Technology,2018,154:175-186.
[10] Giraud I,Franceschi M S,Perez E,et al.Preparation of aqueous dispersion of thermoplastic sizing agent for carbon fiber by emulsion/solvent evaporation[J].Applied Surface Science,2013,266:94-99.
[11] Soo K,Deok B,Choi N S.Fiber/epoxy interfacial shear strength measured by the microdroplet test[J].Composites Science & Technology,2008,69(2):245-251.
[12] Bernard,Miller,Pierre,et al.A microbond method for determination of the shear strength of a fiber/resin interface[J].Composites Science & Technology,1987,28(1):17-32.
[13] Gao S L,Kim J K.Cooling rate influences in carbon fibre PEEK composites.Part 1.Crystallinity and interface adhesion[J].Composites Part A:Applied Science and Manufacturin,2000,31(6):517-530.
[14] 付豪,陈俊林,王凯,等.热处理对碳纤维/聚酰胺6复合材料界面结晶及力学性能的影响[J].复合材料学报,2018,35(4):815-822.
