科学研究

低温工程绝热材料PIR的老化研究及寿命预测

展开
  • 1.中国空气动力研究与发展中心,绵阳621000;
    2.株洲时代新材料科技股份有限公司,株洲412000
田富竟(1987-),工程师,博士,主要研究方向为低温工程应用材料,E-mail:18674440178@163.com。

收稿日期: 2021-06-23

  修回日期: 2021-09-14

  网络出版日期: 2021-12-13

Study of aging and life prediction of polyisocyanurate foam thermal insulation material in cryogenic engineering

Expand
  • 1. China Aerodynamics Research and Development Center,Mianyang 621000;
    2. Zhuzhou Times New Material Technology Co.,Ltd.,Zhuzhou 412000

Received date: 2021-06-23

  Revised date: 2021-09-14

  Online published: 2021-12-13

摘要

低温工程一般采用聚异氰脲酸酯(PIR)作为绝热材料。结合在低温服役环境的实际情况,通过人工加速老化的方法,对PIR绝热材料进行加热老化实验,对材料的拉伸强度与弯曲强度等随老化时间、老化温度等的变化情况及性能退化趋势进行研究分析,并应用阿累尼乌斯图对所选用型号的PIR绝热材料进行寿命预测。研究结果表明,该材料满足工程运行的寿命要求。

本文引用格式

田富竟, 郑永, 洪兴福, 肖楚璠, 葛雨珩 . 低温工程绝热材料PIR的老化研究及寿命预测[J]. 化工新型材料, 2021 , 49(11) : 172 -175 . DOI: 10.19817/j.cnki.issn 1006-3536.2021.11.036

Abstract

Cryogenic engineering usually uses the polyisocyanurate (PIR) foam as thermal insulation material.Combining with the actual situation of serving in low temperature environment,the heat aging tests of PIR were carried out by the artificial accelerated aging.The variation and performance degradation trend of the material's tensile strength and bending strength with aging time and aging temperature were studied and analyzed.The life prediction of the selected type of thermal insulation material was made by using the Arrhenius diagram.The results shown that it can meet the life requirements of this project operation.

参考文献

[1] 化工部合成材料研究院.聚合物防老化实用手册[M].北京:化学工业出版社,1999.
[2] 曾宪峰.高分子材料与防老化[M].北京:化学工业出版社,1979.
[3] 黄丽.高分子材料[M].北京:化学工业出版社,2009.
[4] Sirirat J B,Chusaksr,Pitt S,et al.Effects of thermal aging on properties and pyrolysis products of tire tread compound[J].Journal of Analytical and Applied Pyrolysis,2007,80(1):269-276.
[5] Wang Y M,LiuL,Luo Y F,et al.Aging behavior and thermal degradation of fluoric elastomeric reactive blend with polyphenol hydroxyl EPDM[J].Polymer Degradation and Stability,2009,94:443-449.
[6] 黄伟,黄大明,姚起宏.塑料老化性能及使用寿命预测的新方法[J].中国塑料,2003,17(6):56-58.
[7] 马丽婷,陈新文,苏彬.航空有机玻璃老化研究进展[J].材料工程,2004(8):57-59.
[8] Song D D,Gao J,Li X G,et al.Evaluation of aging behavior of poly propylene in natural environment by principal component analysis[J].Polymer Testing,2014,33:131-137.
[9] Zhao Q L,Li X G,Gao J.Aging of ethylene-propylene-dine monomer (EPDM) in artificial weathering environment[J].Polymer Degradation and Stability,2007,92(10):1841-1846.
[10] 余超,文庆珍,朱金华.特种氯丁橡胶在热空气及热海水中的老化与使用寿命预测[J].高分子材料科学与工程,2011,27(4):37-39.
[11] Davies P,Evrard G.Accelerated aging of polyurethanes for marine applications[J].Polymer Degradation and Stability,2007,92(8):1455-1466.
[12] Blanco L,Abate L,Antonelli M L.The regression of isothermal thermogravimetric data to evaluate degradation Ea values of polymers:a comparison with literature methods and an evaluation of lifetime predictions reliability.part Ⅱ[J].Polymer Degradation and Stability,2013,98(11):2291-2296.
[13] 孙博,李岩.复合材料湿热老化行为研究及其耐久性预测[J].玻璃钢/复合材料,2013(4):28-33.
[14] Celina M,Gillen K T,Assink R A.Accelerated aging and lifetime prediction:review of non-arrhenius behavior due to two competing process[J].Polymer Degradation and Stability,2005,90(3):395-404.
Options
文章导航

/