科学研究

动态加载下不同特性浇注聚合物粘结炸药的力学响应研究

展开
  • 西安近代化学研究所,西安710065
陈春燕(1979-),女,博士,高级工程师,研究方向为PBX配方及工艺设计,E-mail:ccyanzi04@163.com。

收稿日期: 2020-03-16

  修回日期: 2021-04-24

  网络出版日期: 2021-08-19

Mechanical behavior of different property PBX by dynamic loading

Expand
  • Xi'an Modern Chemistry Research Institute,Xi'an 710065

Received date: 2020-03-16

  Revised date: 2021-04-24

  Online published: 2021-08-19

摘要

利用力学实验机、分离式霍普金森压杆和落锤对不同特性的聚合物粘结炸药(PBX)进行了实验,获取了静态开放加载(1mm/min、5mm/min、10mm/min)和动态围压加载下(800s-1、1200s-1、1800s-1)的应力-应变曲线,用扫描电子显微镜(SEM)分析了不同特性PBX的损伤模式。结果表明:不同力学特性的PBX都具有明显的应变率效应。对同一种PBX采用围压动态加载获得的弹性模量是开放静态加载弹性模量的数百倍。落锤从同一落高撞击不同弹性模量PBX时,弹性模量大的PBX上采集获得的应力峰值也大。

本文引用格式

陈春燕, 南海, 李昆, 郑亚峰 . 动态加载下不同特性浇注聚合物粘结炸药的力学响应研究[J]. 化工新型材料, 2021 , 49(7) : 162 -166 . DOI: 10.19817/j.cnki.issn 1006-3536.2021.07.037

Abstract

Mechanical behaviors of different property PBX were investigated experimentally by mechanical machine and split Hopkinson pressure bars(SHPB) at different strain-rates(ranged from 800s-1 to 1800 s-1).Nonlinear stress-strain curves at different strain rates were obtained,and the micro damage modes were analyzed by scanning electron microscope(SEM).The results shown that the mechanical behaviors of different property PBX exhibited obviously strain rate.For the same PBX,the elastic modulus obtained by dynamic confining pressure loading was hundreds of times of that obtained by open static loading.When the drop hammer hitted PBX with different elastic modulus from the same drop height,the peak stress of PBX with larger elastic modulus was larger.

参考文献

[1] Gordana A,Vesna R,Zoran B.Influence of content and dispersion of octogene and oxidizeron the mechanical properties of cast aluminized PBX[J].Scientific Technical Review,2008,7(2):51-59.
[2] Gordana A,Vesna D.Characteristics of cast PBX with aluminum[J].Scientific Technical Review,2006,56(3-4):52-58.
[3] Palmer S J,Field J E,Huntley J M.Deformation,strengths and strains to failure of polymer bonded explosives[J].Proceedings of the Royal society of London(Series A:Mathematical and Physical sciences),1993,440:399-419.
[4] Walley S M,Siviour C R,Drodge D R,et al.High rate mechanical properties of energetic materials[J].Journal of the Minerals Metals&Materials Society,2010,62(1):31-34.
[5] 李昆,焦建设,陈春燕,等.小组分对热固性浇注PBX性能的影响[J].爆破器材,2016,45(3):26-29.
[6] 徐芝纶.弹性力学[M].第三版.北京:高等教育出版社,1990,45-48.
Options
文章导航

/