质子交换膜燃料电池(PEMFC)由于具有轻便高效、启动温度低,以及环境友好等优点而广泛应用于现代工业建设的多个领域。本文综述了近年来PEMFC的关键材料催化剂、双极板以及质子交换膜等的制备及性能,提出了其在实际应用中存在的问题和相应的改进措施,并展望了其发展方向。
Having low starting temperature,efficient,portable and environment-friendly advantages,the proton exchange membrane fuel cells are used in the modernization of industry.The key materials are including catalysts,bipolar plates and proton exchange membrane and etc.The preparation and performance of key materials were reviewed,and proposed the problems in the application and the improvement measures.It was prospected that the development of key materials.
[1] Zhang J L,Xie Z,Zhang J J,et al.High temperature PEM fuel cells[J].Journal of Power Sources,2006,160(2):872-891.
[2] Li Q,He R,Jensen J O,et al.PBI-based polymer membranes for high temperature fuel cells-preparation,characterization and fuel cell demonstration[J].Fuel Cells,2004,4(3):147-159.
[3] Doyle M,Choi S K,Proulx G.High-temperature proton conducting membranes based on perfluorinated ionomer membrane-ionic liquid composites[J].Journal of The Electrochemical Society,2000,147(1):34-37.
[4] Authayanun S,Im-Orb K,Arpornwichanop A.A review of the development of high temperature proton exchange membrane fuel cells[J].Chinese Journal of Catalysis,2015,36(4):473-483.
[5] Hou M,Yi B L.Progress and perspective of fuel cell technology[J].Journal of Electrochemistry,2012,18(1):1-13.
[6] Ruan H X,Wu C Q,Liu S L,et al.Design and simulation of novel flow field plate geometry for proton exchange membrane fuel cells[J].Heat Mass Transfer,2016,52:2167-2176.
[7] 邵志刚,衣宝廉,韩明,等.质子交换膜燃料电池电极的一种新的制备方法[J].电化学,2007,35(8):56-57.
[8] 廖萍,黄明宇,倪红军,等.质子交换膜燃料电池(PEMFC)双极板制备过程的研究[J].化工新型材料,2007,35(8):56-57.
[9] 徐洪峰,田颖,燕喜强.质子交换膜燃料电池电极制备及评价[J].大连铁道学院学报,2000,21(1):85-88.
[10] 和庆钢,马紫峰,原鲜霞,等.质子交换膜燃料电池中碳纳米管负载的氧电极材料制备与表征[J].材料科学与工程学报,2004,22(5):653-656.
[11] Ksenia N,Alexandra K,Igor L,et al.Influence of carbon support on catalytic layer performance of proton exchange membrane fuel cells[J].Electrocatalysis,2018,9:22-30.
[12] Yongtaek Lee.Wettability characterization of pore networks of gas diffusion layers in proton exchange membrane fuel cells[J].Journal of Mechanical Science and Technology,2017,31(4):1959-1968.
[13] Adnan O,Samaneh S,Jian Z,et al.Assessment of graphene as an alternative microporous layer material forproton exchange membrane fuel cells[J].Fuel,2018,215(1):726-734.
[14] Yohann R J Thomas,Anass Benayad,Maxime Schroder,et al.New method for super hydrophobic treatment of gas diffusion layers for proton exchange membrane fuel cells using electrochemical reduction of diazonium salts[J].ACS Appl Mater Interfaces,2015,7(27):15068-15077.
[15] Taro Kinumoto,Takuya Matsumura,Koki Yamaguchi,et al.Material processing of bamboo for use as a gas diffusion layer in proton exchange membrane fuel cells[J].ACS Sustainable Chem Eng,2015,3(7):1374-1380.
[16] Didem C Dogan,Seonghun Cho,Hwang S Mi,et al.Highly durable supportless Pt hollow spheres designed for enhanced oxygen transport in cathode catalyst layers of proton exchange membrane fuel cells[J].ACS Appl Mater Interfaces,2016,8(41):27730-27739.
[17] 郝金凯,姜永燚,王禛,等.高温质子交换膜燃料电池用聚苯并咪唑/聚乙烯基苄基交联膜的制备与性能研究[J].电化学,2015,21(5):441-448.
[18] Phimraphas N,Lin H L,T Leon Yu.Crosslinked ethyl phosphoric acid grafted polybenzimidazole and polybenzimidazole blend membranes for high-temperature proton exchange membrane fuel cells[J].J Polym Res,2016,23:22.
[19] Graeme N,Giuseppe P,Sandra L,et al.Interplay between composition,structure,and properties of new H3PO4-Doped PBI4N-HfO2 nanocomposite membranes for highTemperature proton exchange membrane fuel cells[J].Macromolecules,2015,48(1):15-27.
[20] Wu W,Zou G W,Fang X Y,et al.Effect of methylimidazole groups on the performance of poly(phenylene oxide) based membrane for high-temperature proton exchange membrane fuel cells[J].Ind Eng Chem Res,2017,56(37):10227-10234.
[21] Akbar S,Mehran J,Hossein Salar Amoli,et al.Novel nanocomposite membranes based on polybenzimidazoleand Fe2TiO5 nanoparticles for proton exchange membrane fuel cells[J].Ionics,2015,21:2227-2236.
[22] 薛艳红,傅荣强,徐铜文,等.磺化聚醚醚酮与壳聚糖共混制备直接甲醇燃料电池用质子交换膜[J].高分子学报,2010,(3):285-291.
[23] Mohanraj V,Ramanujam K,Ae Rhan Kim,et al.Facile enhancement in proton conductivity of sulfonated poly (ether ether ketone) using functionalized grapheme oxide-synthesis,characterization,and application towards proton exchange membrane fuel cells[J].Colloid Polym Sci,2016,294(7):1197-1207.
[24] Jiang Z J,Jiang Z Q,Tian X N,et al.Sulfonated holey graphene oxide (shgo) filled sulfonated poly(ether ether ketone) membrane:the role of holes in the shgo in improving its performance as proton exchange membrane for direct methanol fuel cells[J].ACS Appl Mater Interfaces,2017,9(23):20046-20056.
[25] Hossein B,Mehran J,Elaheh K.Synthesis and characterization of poly(vinyl alcohol)/sulfonated graphene oxide nanocomposite membranes for use in proton exchange membrane fuel cells (PEMFCs)[J].Ind Eng Chem Res,2014,53(43):16621-16632.
[26] 王哲,吴清海,倪宏哲,等.磺化聚芳醚酮砜/聚吡咯复合型直接甲醇燃料电池用质子交换膜的制备与性能研究[J].高分子学报,2010,(7):835-841.
[27] 徐晶美,赵莹,程海龙,等.质子交换膜燃料电池用含氨基磺化聚芳醚酮砜交联膜的制备与性能研究[J].高分子学报,2013,(11):1438-1444.
[28] 刘晓秋,吕雪艳,李胜海.燃料电池用磺化聚酰亚胺质子交换膜材料的制备与性质[J].分子科学学报,2009,25(3):179-182.
[29] 陈康成,白文馨,赵之平,等.羰基和砜基共交联磺化聚酰亚胺质子交换膜的制备及燃料电池性能[J].高等学校化学学报,2015,36(4):781-787.
[30] Li Q,Wang G J,Ye H,et al.Nanocomposite membranes based on perfluorosulfonic acid/ceramic for proton exchange membrane fuel cells[J].Journal of Wuhan University of Technology-Mater Sci Ed,2015,30(6):1125-1129.
[31] Yao B J,Yan X L,Ding Y,et al.Synthesis of sulfonic acid-containing polybenzoxazine for proton exchange membrane in direct methanol fuel cells[J].Macromolecules,2014,47(3):1039-1045.
[32] Wang J,Gong Ch L,Wen S,et al.Proton exchange membrane based on chitosan and solvent-free carbon nanotubefluids for fuel cells applications[J].Carbohydrate Polymers,2018,186:200-207.
[33] Zhou Y H,Yang J,Su H B,et al.Insight into proton transfer in phosphotungstic acid functionalized mesoporous silica-based proton exchange membrane fuel cells[J].J Am Chem Soc,2014,136(13):4954-4964.
[34] Jia Q Y,Li J K,Keegan C,et al.Circumventing metal dissolution induced degradation of Pt-alloy catalysts in proton exchange membrane fuel cells:revealing the asymmetric volcano nature of redox catalysis[J].ACS Catal,2016,6(2):928-938.
[35] Jarrid A,Wittkopf,Zheng J,et al.High-performance dealloyed PtCu/CuNW oxygen reduction reaction catalyst for proton exchange membrane fuel cells[J].ACS Catal,2014,4(9):3145-3151.
[36] Fernanda T da Silva,Vicent i A.Dalmazzo,et al.Effect of Ni proportion on the performance of proton exchange membrane fuel cells using PtNi/C electrocatalysts[J].Ionics,2014,20(3):381-388.
[37] Elaheh L,Mehran Ja,Sayed A M.Synthesis of graphene-supported ptcofe alloy with different thermal treatment procedures as highly active oxygen reduction reaction electrocatalysts for proton exchange membrane fuel cells[J].Ind Eng Chem Res,2016,55(34):9154-9163.
[38] Luis C,Wanderson O Silva,Fabio H B Lima,et al.Carbon corrosion in proton-exchange membrane fuel cells:effect of the carbon structure,the degradation protocol,and the gas atmosphere[J].ACS Catal,2015,5(4):2184-2194.
[39] Yu K,Daniel J Groom,Wang X P,et al.Degradation mechanisms of platinum nanoparticle catalysts in proton exchange membrane fuel cells:the role of particle size[J].Chem Mater,2014,26(19):5540-5549.
[40] Ayaz H,Valdecir A P,Edson A T.Effect of addition of ru and/or fe in the stability of ptmo/c electrocatalysts in proton exchange membrane fuel cells[J].Electrocatalysis,2015,6(6):512-520.
[41] Napapat C,Kejvalee P,Hugues,et al.Effect of the TiO2 phase and loading on oxygen reduction reaction activity of PtCo/C catalysts in proton exchange membrane fuel cells[J].Korean J Chem Eng,2015,32(7):1305-1313.
[42] Jarrid A Wittkopf,Zheng J,Yan Y S.High-performance dealloyed ptcu/cunw oxygen reduction reaction catalyst for proton exchange membrane fuel cells[J].ACS Catal,2014,4(9):3145-3151.
[43] Jia Q Y,Keegan C,Kara S,et al.Improved oxygen reduction activity and durability of dealloyed ptcox catalysts for proton exchange membrane fuel cells:strain,ligand,and particle size effects[J].ACS Catal,2015,5(1):176-186.
[44] Elaheh L,Mehran J,Sayed A M.Synthesis of graphene-supported ptcofe alloy with different thermal treatment procedures as highly active oxygen reduction reaction electrocatalysts for proton exchange membrane fuel cells[J].Ind Eng Chem Res,2016,55(34):9154-9163.
[45] Sun X,Xu H F,Lu L,et al.Preparing a catalyst layer in magnetic field to improve the performance of proton exchange membrane fuel cells[J].J Appl Electrochem,2014,44(11):1179-1184.
[46] Bharat A,Pradeep H.Durability and degradation mechanism of titanium nitride based electrocatalysts for PEM(proton exchange membrane) fuel cell applications[J].Energy,2013,57:545-553.
[47] Li B,Qiao L,Yang D J,et al.Synthesis of a highly active carbon-supported Ir-V/C catalyst for the hydrogen oxidation reaction in PEMFC[J].Electrochim Acta,2009,54(24):5614-5620.
[48] 张海艳,林瑞,曹春晖,等.用于质子交换膜燃料电池抗CO的Pt-CeO2/C催化剂的制备和表征[J].催化学报,2011,32(4):606-611.
[49] 孙启梅,花亮,陈雨,等.质子交换膜燃料电池阴极催化剂用WO3的制备与性能[J].南京工业大学学报(自然科学版),2008,30(6):10-13.
[50] Stella O,Mikkel J L,Anna P,et al.Photochemically modified ATO NPs as conductive support of Pt electrocatalysts for proton exchange membrane fuel cells[J].J Nanopart Res,2015,17:273.
基金资助
贵州省教育厅青年科技人才成长资助项目(黔教合KY字[2016]324);《化学工程与技术重点学科》(705007-711010020);黔南民族师范学院2014年度院级科研项目(qnsy2014022);黔南民族师范学院2018年度校级科研项目(qnsy2018013)