PDF (2414K)
摘要
以合成的热硫化苯基硅生胶为基体,碳化硼为中子吸收材料,白炭黑为补强填料,在过氧化二异丙苯(DCP)硫化作用下,制备了热硫化苯基硅生胶/碳化硼复合材料。分别采用FT-IR、SEM、TG、硬度计、电子万能试验机等对合成的热硫化苯基硅生胶分子结构及复合材料的形貌、热失重和力学性能进行了分析。结果表明,合成的热硫化苯基硅生胶以Si—O—Si为主链,同时还含有甲基、乙烯基和苯基侧基。碳化硼在复合材料中分散比较均匀。随着碳化硼含量的增加,复合材料的邵氏硬度逐渐增加,拉伸强度和热失重率逐渐降低。辐照使复合材料的密度、热失重率和力学性能均有一定程度的提高,且辐照剂量越大,变化越明显。复合材料耐温达450℃。
Abstract
Under the action of dicumyl peroxide(DCP)vulcanization,the heat vulcanized phenyl-silicone rubber/boron carbide composites were prepared by using the synthesized heat vulcanized phenyl-silicone rubber as matrix,boron carbide as neutron absorbing materials and silica as reinforcing fillers.The molecular structure of synthesized rubber,the morphology,heat weight-loss rate and mechanical properties of composites were analyzed by Fourier transform infrared spectroscopy,scanning electron microscope,thermal gravimetric analyzer,hardness tester and electronic universal testing machine.The results showed that the synthesized rubber was based on Si—O—Si as the main chain,containing methyl,vinyl and phenyl pendant groups.Boron carbide were evenly dispersed in the composites.With the increase of boron carbide content,the shore hardness of composites gradually increased,while the tensile strength and heat weight-loss rate gradually decreased.The density,heat weight-loss rate and mechanical properties were improved to a certain extent by irradiation,and the greater the radiation dose,the more obvious the change.The composites could resist to high temperature of 450℃.
关键词
硅生胶
/
碳化硼
/
白炭黑
/
复合材料
/
力学性能
Key words
silicone rubber
/
boron carbide
/
silica
/
composite material
/
mechanical property
热硫化苯基硅生胶/碳化硼复合材料的制备及相关性能研究[J].
化工新型材料, 2018, 46(4): 47-50 DOI:
[1] 孙清.Pb3B10O16[OH]4的制备及其性能研究[D].绵阳:西南科技大学,2016.
[2] 刘显坤,刘颖,唐杰,等.辐射屏蔽材料的研究进展[J].材料导报,2006,21(6):82-85.
[3] Tubiana M.Radiation risks in perspective:radiation-induced cancer among cancer risks[J].Radiation and Environmental Biophysics,2000,39(1):3-16.
[4] Gebhardt O,Gavillet D.SIMS imaging analyses of in-reactor irradiated boron carbide control rod samples[J].Journal of Nuclear Materials,2000,279(2):368-371.
[5] Gwaily S E,Hassan H H,Badawy M M,et al.Natural rubber composites as thermal neutron radiation shields[J].Polymer Testing,2002,21(2):129-133.
[6] 曹仲文,张继红.核工业用碳化硼材料产业化前景分析[J].新材料产业,2006(5):59-61.
[7] 丁硕,温广武,雷廷权.碳化硼材料研究进展[J].材料科学与工艺,2003,11(1):101-105.
[8] 韩毅,陈法国,于伟跃,等.中子屏蔽材料研究现状[J].材料导报,2015,29(26):483-488.
[9] 马涛,刘宇艳,刘少柱,等.防辐射材料的研究进展[J].高分子通报,2012,14(9):81-86.
[10] 戴春娟,刘希琴,刘子利.高密度B4C/Al中子屏蔽材料的蒙特卡罗模拟[J].核技术,2013,36(3):17-21.
[11] Singh V P,Badiger N M.Gamma ray and neutron shielding properties of some alloy materials[J].Annals of Nuclear Energy,2014,64(9):301-310.
[12] 张哲维,王文先,张鹏,等.MC方法研究颗粒变化影响B4C/Al中子吸收性能的机制[J].太原理工大学学报,2015,46(4):385-388.
[13] 刘涛.白炭黑补强天然橡胶的反应性加工及结构与性能[D].青岛:青岛科技大学,2016.
[14] 牟宏博.甲基单苯基乙烯基硅橡胶的合成与性能研究[D].北京:北京化工大学,2010.
[15] 史东林,舒远杰,余凤湄,等.线性热硫化聚单苯基硅氧烷可控合成及性能研究[J].功能材料,2013,44(10):1442-1446.
[16] 张艳,陈一,别亚星,等.苯基硅橡胶的合成及耐高温功能化[J].航天制造技术,2017(1):44-46.
[17] 罗延龄,赵振兴.高分子辐射交联技术及研究进展[J].高分子通报,1999(4):88-99.
[18] 饶文武.纳米磁性聚四氟乙烯密封填料制备及性能研究[D].兰州:兰州理工大学,2012.
基金资助
中国工程物理研究院应用技术开发基金(JM201606)
