可见光响应型Cu掺杂TiO2纳米管的阳极氧化制备及表征

高尚1,占旭1,2,马清2,3*,刘绍军3,缪亚美1,宋申华1

化工新型材料 ›› 2017, Vol. 45 ›› Issue (9) : 74 -76.

PDF
化工新型材料 ›› 2017, Vol. 45 ›› Issue (9) : 74-76.
新材料与新技术

可见光响应型Cu掺杂TiO2纳米管的阳极氧化制备及表征

    高尚1,占旭1,2,马清2,3*,刘绍军3,缪亚美1,宋申华1
作者信息 +

Preparation and characterization of visible-light-sensitive anodic Cu-doped TiO2 nanotube arrays

  • Gao Shang1, Zhan Xu1,2, Ma Qing2,3, Liu Shaojun3, Miu Yamei1, Song Shenhua1
Author information +
文章历史 +
PDF

摘要

为了实现简易可控生长Cu掺杂TiO2纳米管并有效拓展其吸收带边,通过电化学阳极氧化,在Cu质量百分含量为5%的Cu5Ti95合金基体上生长出高度有序Cu掺杂TiO2纳米管前驱体,并在O2气氛450℃退火晶化2h。并对纳米管的形貌、晶型结构和光谱吸收等性能进行表征。结果表明:Cu-Ti-O纳米管阵列的管长、管径和管壁厚度分别为5.8μm、150nm和10~15nm,经O2气氛450℃退火晶化2h后,纳米管底部发生锐钛矿向金红石相转变,Cu-Ti-O纳米管阵列吸收带边红移至450nm,为后续光电化学性能测试提供了重要的实验依据。

Abstract

In order to effectively broaden the absorption band edge of Cu-doped TiO2 nanotubes with simple and controllable preparation,electrochemical anodization was used to grow well organized Cu-Ti-O nanotube arrays on Cu5Ti95 alloy substrate with 5wt% Cu concentration and crystallized in oxygen atmosphere at 450℃ for 2h.The morphology,structure,and absorbility of annealed Cu-Ti-O nanotube arrays were characterized.The results showed that the tub length,diameter and thickness were ~5.8μm,~150nm and ~10-15nm,respectively.The transformation of anatase to rutile was occurred in the bottom of nanotubes after being annealed in O2 atmosphere at 450℃.The absorption edge of annealed Cu-Ti-O nanotube arrays had red-shifts to ~450nm.These provided a key experimental evidence for the future photo-electrochemical property researches.

关键词

Cu掺杂 / Cu-Ti合金 / 阳极氧化 / 可见光响应

Key words

Cu-doping / Cu-Ti alloy / anodization / visible-light-sensitive

引用本文

引用格式 ▾
可见光响应型Cu掺杂TiO2纳米管的阳极氧化制备及表征[J]. 化工新型材料, 2017, 45(9): 74-76 DOI:

登录浏览全文

4963

注册一个新账户 忘记密码

参考文献

[1] 张永刚,罗永松,马丽丽,等.TiO2-Cu2O复合膜的制备及其可见光催化降解染料性能研究[J].化工新型材料,2007,35(3):48-50.
[2] 陈玉进.TiO2纳米管的研究进展[J].化工新型材料,2011,39(1):42-44.
[3] Mor G K,Varghese O K,Wilke R H,et al.p-Type Cu-Ti-O nanotube arrays and their use in self-biased heterojunction photoelectrochemical diodes for hydrogen generation[J].Nano Lett,2008,8(7):1906-1911.
[4] Mor G K,Prakasam H E,Varghese O K,et al.Vertically oriented Ti-Fe-O nanotube array films:toward a useful material architecture for solar spectrum water photoelectrolysis[J].Nano Lett,2007(8):2356-2364.
[5] Kim W G,Choe H C,Ko Y M,et al.Nanotube morphology changes for Ti-Zr alloys as Zr content increases[J].Thin Solid Films,2009,517(17):5033-5037.
[6] Tsuchiya H,Akaki T,Nakata J,et al.Anodic oxide nanotube layers on Ti-Ta alloys:substrate composition,microstructure and slef-organization on two-size scales[J].Corros Sci,2009,51(7):1528-1533.
[7] Feng X J,Macak J M,Albu S P,et al.Electrochemical formation of self-organized anodic nanotube coating on Ti-28Zr-8Nb biomedical alloy surface[J].Acta Biomater,2008,4(2):318-323.
[8] Ma Q,Liu S J,Weng L Q,et al.Growth,structure and photocatalytic properties of hierarchical Cu-Ti-O nanotube arrays by anodization[J].J Alloys Compd,2010,501(2):333-338.
[9] Mohapatra S K,Raja K S,Misra M,et al.Synthesis of self-organized mixed oxide nanotubes by sonoelectrochemical anodization of Ti-8Mn alloy[J].Electrochim Acta,2007,53(2):590-597.
[10] Ma Q,Liu S J.Significantly enhanced structural and thermal stability of anodized anatase nanotube arrays induced by tensile strain[J].Electrochim Acta,2011,56(22):7596-7601.
[11] 马清,陈建军,符冬菊,等.阳极氧化制备TiO2纳米管阵列的可控相转变及表征[J].中国有色金属学报,2015,25(2):430-439.
[12] 马清,陈建军,刘绍军,等.可见光响应型Cu-Ti-O纳米管阵列的阳极氧化制备及表征[J].中国有色金属学报,2014,24(11):2827-2834.
[13] Reimann K,Syassen K.Pressure dependence of Raman modes in CuO[J].Solid State Commun,1990,76(2):137-140.
[14] 张青红,高濂,郭景坤.量子尺寸氧化钛纳米晶的制备及其光谱研究[J].无机材料学报,2000,15(5):929-934.
[15] 王家恒,宫长伟,付现凯,等.TiO2光催化剂的掺杂改性及应用研究进展[J].化工新型材料,2016,44(1):15-18.
[16] 潘能乾,廖建军,李丹红,等.TiO2纳米管阵列电极制备与光催化制氢性能的关系[J].硅酸盐学报,2013,41(10):1366-1374.

基金资助

国家自然科学基金项目(51302150);深圳市基础研究计划项目(JCYJ20150402103811551)

AI Summary AI Mindmap
PDF

387

访问

0

被引

导航
相关文章

AI思维导图

/