Performance study on the ultra-high molecular weight polyethylene modified using FEP

  • Hou Huiyu ,
  • Feng Yanhong
Expand
  • 1. Guangzhou Institute of Technology,Petroleum Chemical Engineering Department, Guangzhou 510075;
    2. South China University of Technology,The New Polymer Molding Equipment National Engineering Research Center Guangdong,Guangzhou 510641

Received date: 2019-10-09

  Revised date: 2020-10-19

  Online published: 2021-03-03

Abstract

Using ultra-high molecular weight polyethylene (UHMWPE) as the base material,The UHMWPE modified mixture was prepared by adding high-density polyethylene,ethylene-acrylate copolymer,nano SiO2 and other modifiers.According to UHMWPE modified mixture,study has been done about FEP addition and dosage how to effect mechanical properties,wear properties,melt properties and thermal properties of the polymer systems.Results show that before and after FEP added,nanoparticles have good dispersion in the polymer systems;Tensile strength and impact strength as well as thermal properties have little change;Wear properties almost felled 50%,and melt properties improved a little.When FEP was small amount,tensile strength and impact strength of the polymer systems was rising as FEP scales up;when the percentage of FEP is above 2%,tensile strength and impact strength of the polymer systems was falling as FEP scales up.Wear properties of the polymer systems were lowest when the percentage of FEP is 2%.

Cite this article

Hou Huiyu , Feng Yanhong . Performance study on the ultra-high molecular weight polyethylene modified using FEP[J]. New Chemical Materials, 2021 , 49(2) : 68 -71 . DOI: 10.19817/j.cnki.issn 1006-3536.2021.02.016

References

[1] 刘广建.超高分子量聚乙烯[M].北京:化学工业出版社,2001,3-5.
[2] 苏荣锦.高性能超高分子量聚乙烯复合材料的制备与性能研究[D].株洲:湖南工业大学,2012.
[3] 张海琛.基于拉伸流变的UHMWPE熔融挤出过程及其结构与性能研究[D].广州:华南理工大学,2016.
[4] 何春霞,顾红艳.不同材料填充超高摩尔质量聚乙烯复合材料的力学性能分析[J].塑料工业,2002,30(5):29-31.
[5] 张恒,王李波,高誉鹏,等.纳米改性增强超高分子量聚乙烯复合材料研究进展[J].材料导报A:2016,30(3):33-38.
[6] 雷毅,郭建良.纳米ZnO和SiO2共混填充UHMwPE复合材料的摩擦磨损行为[J].高分子材料科学与工程,2008,24(12):110.
[7] 雷毅,郭建良.纳米粒子和聚四氟乙烯填充UHMWPE复合材料的摩擦磨损性能研究[J].润滑与密封,2007,32(5):23-26.
[8] Wu Y C,Cui Y H,Jin H L.Study on the preparation and thermal shrinkage properties of nano-SiO2/UHMWPE/HDPE blend microporous membranes[J].Journal of Applied Polymer Science,2015,132(3):41321.
[9] Xiong Dangsheng,Lin Jianming,Fan Dongli,et al.Wear of nano TiO2/UHMWPE composites radiated by gamma ray under physiological saline water lubrication[J].J Mater Sci Mater Medicine,2007,l8(11):2131.
[10] Fang Liming,Oo Ping,Leng Yang.High strength and bioactive hydroxyapatite nano-particles reinforced ultrahigh molecular weight polyethylene[J].Composites Part B:Eng,2007,38(3):345.
[11] Fang Laming,Leng Yang,Gao Ping.Processing and mechanical properties of HA/UHMWPE nanoeomposites[J].Biomaterials,2006,27(20):3701.
[12] 黄丽,战仁波,姜志国,等.纳米SiO2改性UHMWPE性能的研究[J].北京化工大学学报,2005,32(3):38-41.
[13] 刘婷,黄安民,朱志勇,等.全氟聚醚改性超高相对分子质量聚乙烯复合材料的性能研究[J].中国塑料,2015,29(4):30-35.
Options
Outlines

/